When using the transfer tool on WHM to move an account from one server to another does the old server website still remain live in the process?
Transfer process will not terminate your account from old server. You will have to update your domain nameserver so that your domain will be resolve to your new server.
Transfer tool will help you to copy content, database from old server to new server. Once you copied all data then you need to point domain DNS to new server i.e IP and Nameserver and then website will start running from new server post DNS propagation.
Related
I'm setting up a new server on AWS, everything is working as expected. but I recently found out that in order to be elegible for business in my country I need to have the server be local. Is there a way I would reroute the server on request? like point to local IP, but all the rest api/admin panel would show/result AWS server?
This is a new problem for me, have not tried anything.
I have an AWS EC2 server that hosts 3 domains with Apache 2. This server sits behind an AWS ELB load balancer which sends it requests. If I want to update this server, instead of taking the server down, I can create a new identical EC2 server and install all the software using the same scripts that built the first server and when it is ready I can add the new server to the ELB and then remove the old server. This gives me zero downtime which is great.
But before I remove the old server how do test the new server to prove everything is working and it is serving those 3 domains? DNS points to the ELB for these domains, the ELB sendsthe requests to the server, and the Apache install on the server routes the traffic to the appropriate site depending on what subdomain was requested. Is there a way make a request to the new server via IP address since that is the only way to address it before it is behind the ELB but tell it I want to make a request to a specific subdomain? If not how else can I prove all 3 sites are running and working properly without just adding it to the ELB, removing the old server, and crossing my fingers?
P.S. Sorry for the poor title. Please edit it if you can think of a better one that better represents what I am asking.
Use ELB healthcheck to perform the check. I recommend you to enable Apache server status mod. Use health check against /server-status and if it returns 200 for certain period of time, ELB will mark the instance as active and healthy.
I was running my webserver on Plesk platform before moving to CPanel due to my perceived perception of Plesk's over-sensibility to threats to security.
After the migration, my site runs quite alright but a sister site that has my IP in its A records couldn't connect through me anymore. It only brings a default website CGI page. Please, I need help.
Have you created your second site on your cPanel server ? If yes, then there is an issues with the IP, Please check your domain IP and httpd configuration file on cPanel server and try update that IP in your DNS zone which are you using on cPanel server. Most of the time this type of issues occur due to wrong IP.
All i did was to create a wildcard subdomain which was attached to the subdomain already created on the other server i was trying to point to. That did the magic. Sorry my response seems belated.
I've migrated a website to Amazon ec2 that hooks into a service we are using that is installed on another server (not on Amazon). Access to the API for that service is IP-restricted and done by sending XML data using *http_build_query* & *stream_context_create* in PHP.
If I want to connect to the service from a new server, I need to ask the vendor to add the new IP first. I did that by sending the Elastic IP to them, but it doesn't work.
While trying to debug, I noticed that the output for $_SERVER['SERVER_ADDR'] is the private IP of the ec2 instance.
I assume that the server on the other side is receiving the same data, so it tries to authenticate the private IP.
I've asked the vendor to allow access from the private IP as well – it's not implemented yet, so I'm not sure if that solves the problem, but as far as I understand the way their API works, it will then try to parse data back to the IP it was contacted from, which shouldn't be possible because the server is outside the Amazon cloud.
I might miss something really obvious here. I added a command to rc.local (running CENT OS on my ec2 instance) that associates the elastic IP to the server upon startup by using ec2-associate-address, and this seemed to help make a MySQL connection to another outside server working, but no luck with the above mentioned API.
To rule out one thing - the API is accessed through HTTPS, with ports 80 and 443 (and a mysql port) enabled in security groups and tested. The domain and SSL are running fine.
Any hint highly appreciated - I searched a lot already, but couldn't find anything useful so far.
It sounds like both IPs (private and elastic) are active in your VM. Check by running ifconfig -a. If that's what's happening then the IP that gets used for external traffic will depend on the remote address and your VM's routing table. It could even vary from one connection to the next.
If that's what's going on then the quickest fix would be to ifconfig down the interface that has the private address. That should leave only the elastic address for all external connections. If that resolves the problem then you can script something that downs the private IP automatically after the elastic IP has been made active, or if the elastic IP will be permanently assigned to this VM and you really don't need the private IP then you can permanently disassociate the private IP from this VM.
I have a server in at a hoster (which has a static IP) and want to run a server at home too and don't want to buy the dyndns package from dyndns.com
I would either like to find a program that does this without costing money and using my own server and domain so I can have myclient.domain.com or I would like to write this myself. Would I be able to do that with a custom apache conf?
EDIT:
I have 1 Server with a static ip and I want to run a server at home (dynamic IP) I want to use the server with the static ip to run as the dyndns managing server
I use zoneedit.com for my DNS servers, and they have a free dynamic service that works fine for my home box. (On the other hand, my home box changes IP about twice a year, so it's not like I stress it.)
On my home box, I have a script that polls a tiny little cgi on my colo box to return what my current IP is (because I can't get it from the router), and if it's changed, it does a "curl" to update my zoneedit settings. When I get home, I'll try to remember to post the script.
Per your revisions: Ah, then you can theoretically do that, yes. (As noted elsewhere, apache.conf is irrelevant.) Your hosted server needs to be the nameserver of record for your dynamic DNS; you should probably use a subdomain. This would be a record in your main domain's zone file of IN NS server.ip.number.here. Then you configure a DNS server on your hosted server for the dynamic namespace; you'll have to get deep into the configuration to set up the records so that they advise client nameservers not to cache them, or to cache them only very briefly. Then you write some sort of systemry where the home machine, when a connection is established, talks to the hosted server and tells it to change the DNS for the dynamic hostname to point to its currently assigned IP.
You cannot do it with a custom Apache conf. Apache handles web serving, not DNS.
Maybe I´m wrong but I think what you want is:
create a dynamic host in a free DNS service, like dyndns.org (Or you can even manager a entire domain using editdns.com which has dynamic dns also). For example: server-at-home.dyndns.org.
Create a static IP host for the desired address (ex. www2) pointing to the same IP address of the www server.
Create a virtual host in the httpd.conf in the static ip server and put a reverseproxy using the dynamic host create on item 1.
P.S.: You said that the main goal is to void to buy for this service but i use dyndns.com and i dont pay for it. And i have 4 hosts in my account.
I have a server at home with a Static IP address, and I do exactly what you are looking to do with a free dyndns account. I just have to renew it every month or two - they send me an email and I just click the link to let them know I'm still here and alive.
I am not exactly sure, but it sounds like you want to redirect to your "server" at your house from your webserver at the hosted site?
You will need to periodically send some notification to your static IP server to let it know your dynamic ip.
You can do this is some cron/scheduled job - just create a redirect html page every day and ftp it (automagically) to your static ip host.
There are probably other ways to do this. But that should work.