I am unclear on the above statement and how it ties into the various propogation levels within JTA. When a method is annotated with a Transactional Attribute as "Requires_New, a new transaction is always started even when a transaction is already existing. Is this not a nested transaction? Also Spring supports the "Nested" as an additional transactional attribute (over JEE).
Can anyone please explain what this means?
Thanks
Sirish
Many databases does not actually implement nested transactions but uses transaction savepoints instead, so when it appears like a nested transaction is started in the application, what really happens is just that a transaction savepoint is created in the database, and if something happens inside what appears to be a nested transaction in the application, the database just rolls back to the latest savepoint.
https://en.wikipedia.org/wiki/Savepoint
I'm not sure if this is really related to subject, though ...
Related
I was wondering if it's a good practice to nest two transactions? For example wrapping my NHibernate transaction with TransactionScope for the benefit of the Tests (making sure that the db rollbacks all the changes that were made in the test).
The other option is to keep the entities that I insert into the Db in memory and delete them at the end of the test.
Which one is better?
First of all, nhibernate doesn't support nested transactions!
TransactionScope on the other side will not create a new transaction if there is already one opened. If you only use transaction scope, it will create a new transaction for the connection.
If you then open a transaction within the scope, this will still work with nhibernate.
Back to your question, it pretty much depends on the amount of objects you create within the TransactionScope. If it becomes too many, you will simply spam the transaction log of your database. Apart from that, the concept is perfectly fine I would say.
And one important thing to mention, if you use TransactionScope, and you create multiple sessions/transaction with nhibernate, the scope might switch to distributed transactions which requires MSDTC to run on the target server, otherwise it will simply fail.
I'm coding my own data layer using JDBC for accessing SQL databases and one of the main components is the transaction manager.
I'm a little bit confused whether or not to support the nested transactions in this component. A sample code of a nested transaction is as follows:
tx1.begin();
... // do something with tx1
tx2.begin();
... // do something with tx2
tx2.commit();
...
tx1.commit();
During my past development experiments, I've never needed them and I think that they make the code more complex. But, I'm not sure that they are useless or useful. Can you give some example cases in which a nested transaction is required or at least advantageous? And what are the pros and cons of them?
To clarify my question and to explain what I mean by a transaction, I pasted my comment below:
I'm using JDBC. So, the transaction manager is independent of the underlying database. By transaction, I mean non-autoCommit JDBC connections. The transaction manager returns a transaction object with a non-autoCommit connection. The client code using this transcaction, commits and closes the connection by committing the transaction object.
Thanks in advance.
I am dealing with a strange issue related to NHibernate and distributed transactions in a WCF service. See Deadlocks causing 'Server failed to resume the transaction' with NHibernate and distributed transactions for more details.
One thing that seems to solve my problem is using NHibernate's AdoNetTransactionFactory, instead of AdoNetWithDistributedTransactionsFactory.
I believe that the AdoNetWithDistributedTransactionsFactory is involved with making NHibernate's second-level caching mechanism work right, but we're not using that. What (if any) other problems exist with using AdoNetTransactionFactory with distributed transactions?
Thanks for your time!
I notice that you mentioned from your other question/answer:
SqlConnection class is not thread-safe, and that includes closing the connection
on a separate thread. Based on this response we have filed a
bug report for NHibernate.
However, from NHibernate's documentation:
11.2. Threads and connections
You should observe the following practices when creating NHibernate Sessions:
Never create more than one concurrent ISession or ITransaction instance per database connection.
Be extremely careful when creating more than one ISession per database per transaction. The ISession itself keeps track of updates made to loaded objects, so a different ISession might see stale data.
The ISession is not threadsafe! Never access the same ISession in two concurrent threads. An ISession is usually only a single unit-of-work!
If you are trying to multi-thread the connection with NHibernate perhaps it is just not going to work. Have you considered a different ORM such as Entity Framework?
No matter what ORM you choose though, the database connection will not be thread safe. This is universal.
"many DB drivers are not thread safe. Using a singleton means that if you have many threads, they will all share the same connection. The singleton pattern does not give you thread saftey. It merely allows many threads to easily share a "global" instance." - https://stackoverflow.com/a/6507820/1026459
Using AdoNetTransactionFactory with distributed system transactions will cause those transaction to be ignored by NHibernate, which has the following consequences:
ConnectionReleaseMode.AfterTransaction will not be honored. Instead, NHibernate will release the connection after each statement, and so will re-acquire a connection from the pool for the next one. Depending on your data provider, this may trigger escalation of the transaction to distributed.
FlushMode.Commit will not be honored. Explicit flushes will be required instead. (Auto flushes before queries may still occur.)
Works needing to be isolated from current system transaction will still be included inside it. (Unless the connection string Enlist property is false.) Such works may include id generators queries such as retrieving the next high value for a table hilo generator. If the transaction gets roll-backed, NHibernate may then use conflicting ids.
The NHibernate session will not be able to correctly track locks it holds on entities. Considering itself outside of a transaction, it will consider it has no lock on them. So it may try (on user code request by example) to re-lock them with lower lock level than the one the transaction already holds on them in database. Not sure what outcome could result of that. (At best, ignored, at worst...)
Second level cache will be disabled as soon as you start modifying data. NHibernate sort of "invalidate" cache entries in such situation, and re-enable them only on transaction completion, updated. But since it will not be aware of transactions...
Some extensions (maybe Envers) may rely on NHibernate transaction events, and will no more work as expected.
I strongly recommend upgrading to nhibernate 3.2(or a version close to it). Why? Since 2.1, there has been significant improvements (read rewrite) to the AdoNetWithDistributedTransactionFactory. Matter of fact, it now handles TransactionScopes/ambient-transactions and the like correctly. When we ran 2.1 in production we encounter many issues related to distributed transactions. We pretty much had to fix a ton of stuff ourselves and recompile NHibernate. 3.2 seems to have fixed many issues around the subject.
I don't have the source near me but, if memory doesn't fail me, the AdoNetTransactionFactory doesn't check/handle ambient transactions. So, you are down to NHibernate booting transactions when one is not present in the session(by means of ISession.BeginTransaction()).
This is a common question, but the explanations found so far and observed behaviour are some way apart.
We have want the following nHibernate strategy in our MVC website:
A SessionScope for the request (to track changes)
An ActiveRecord.TransactonScope to wrap our inserts only (to enable rollback/commit of batch)
Selects to be outside a Transaction (to reduce extent of locks)
Delayed Flush of inserts (so that our insert/updates occur as a UoW at end of session)
Now currently we:
Don't get the implied transaction from the SessionScope (with FlushAction Auto or Never)
If we use ActiveRecord.TransactionScope there is no delayed flush and any contained selects are also caught up in a long-running transaction.
I'm wondering if it's because we have an old version of nHibernate (it was from trunk very near 2.0).
We just can't get the expected nHibernate behaviour, and performance sucks (using NHProf and SqlProfiler to monitor db locks).
Here's what we have tried since:
Written our own TransactionScope (inherits from ITransactionScope) that:
Opens a ActiveRecord.TransactionScope on the Commit, not in the ctor (delays transaction until needed)
Opens a 'SessionScope' in the ctor if none are available (as a guard)
Converted our ids to Guid from identity
This stopped the auto flush of insert/update outside of the Transaction (!)
Now we have the following application behaviour:
Request from MVC
SELECTs needed by services are fired, all outside a transaction
Repository.Add calls do not hit the db until scope.Commit is called in our Controllers
All INSERTs / UPDATEs occur wrapped inside a transaction as an atomic unit, with no SELECTs contained.
... But for some reason nHProf now != sqlProfiler (selects seems to happen in the db before nHProf reports it).
NOTE
Before I get flamed I realise the issues here, and know that the SELECTs aren't in the Transaction. That's the design. Some of our operations will contain the SELECTs (we now have a couple of our own TransactionScope implementations) in serialised transactions. The vast majority of our code does not need up-to-the-minute live data, and we have serialised workloads with individual operators.
ALSO
If anyone knows how to get an identity column (non-PK) refreshed post-insert without a need to manually refresh the entity, and in particular by using ActiveRecord markup (I think it's possible in nHibernate mapping files using a 'generated' attribute) please let me know!!
Do you know of any ORM tool that offers deadlock recovery? I know deadlocks are a bad thing but sometimes any system will suffer from it given the right amount of load. In Sql Server, the deadlock message says "Rerun the transaction" so I would suspect that rerunning a deadlock statement is a desirable feature on ORM's.
I don't know of any special ORM tool support for automatically rerunning transactions that failed because of deadlocks. However I don't think that a ORM makes dealing with locking/deadlocking issues very different. Firstly, you should analyze the root cause for your deadlocks, then redesign your transactions and queries in a way that deadlocks are avoided or at least reduced. There are lots of options for improvement, like choosing the right isolation level for (parts) of your transactions, using lock hints etc. This depends much more on your database system then on your ORM. Of course it helps if your ORM allows you to use stored procedures for some fine-tuned command etc.
If this doesn't help to avoid deadlocks completely, or you don't have the time to implement and test the real fix now, of course you could simply place a try/catch around your save/commit/persist or whatever call, check catched exceptions if they indicate that the failed transaction is a "deadlock victim", and then simply recall save/commit/persist after a few seconds sleeping. Waiting a few seconds is a good idea since deadlocks are often an indication that there is a temporary peak of transactions competing for the same resources, and rerunning the same transaction quickly again and again would probably make things even worse.
For the same reason you probably would wont to make sure that you only try once to rerun the same transaction.
In a real world scenario we once implemented this kind of workaround, and about 80% of the "deadlock victims" succeeded on the second go. But I strongly recommend to digg deeper to fix the actual reason for the deadlocking, because these problems usually increase exponentially with the number of users. Hope that helps.
Deadlocks are to be expected, and SQL Server seems to be worse off in this front than other database servers. First, you should try to minimize your deadlocks. Try using the SQL Server Profiler to figure out why its happening and what you can do about it. Next, configure your ORM to not read after making an update in the same transaction, if possible. Finally, after you've done that, if you happen to use Spring and Hibernate together, you can put in an interceptor to watch for this situation. Extend MethodInterceptor and place it in your Spring bean under interceptorNames. When the interceptor is run, use invocation.proceed() to execute the transaction. Catch any exceptions, and define a number of times you want to retry.
An o/r mapper can't detect this, as the deadlock is always occuring inside the DBMS, which could be caused by locks set by other threads or other apps even.
To be sure a piece of code doesn't create a deadlock, always use these rules:
- do fetching outside the transaction. So first fetch, then perform processing then perform DML statements like insert, delete and update
- every action inside a method or series of methods which contain / work with a transaction have to use the same connection to the database. This is required because for example write locks are ignored by statements executed over the same connection (as that same connection set the locks ;)).
Often, deadlocks occur because either code fetches data inside a transaction which causes a NEW connection to be opened (which has to wait for locks) or uses different connections for the statements in a transaction.
I had a quick look (no doubt you have too) and couldn't find anything suggesting that hibernate at least offers this. This is probably because ORMs consider this outside of the scope of the problem they are trying to solve.
If you are having issues with deadlocks certainly follow some of the suggestions posted here to try and resolve them. After that you just need to make sure all your database access code gets wrapped with something which can detect a deadlock and retry the transaction.
One system I worked on was based on “commands” that were then committed to the database when the user pressed save, it worked like this:
While(true)
start a database transaction
Foreach command to process
read data the command need into objects
update the object by calling the command.run method
EndForeach
Save the objects to the database
If not deadlock
commit the database transaction
we are done
Else
abort the database transaction
log deadlock and try again
EndIf
EndWhile
You may be able to do something like with any ORM; we used an in house data access system, as ORM were too new at the time.
We run the commands outside of a transaction while the user was interacting with the system. Then rerun them as above (when you use did a "save") to cope with changes other people have made. As we already had a good ideal of the rows the command would change, we could even use locking hints or “select for update” to take out all the write locks we needed at the start of the transaction. (We shorted the set of rows to be updated to reduce the number of deadlocks even more)