angular 2 - npm error - npm

I was following 5 Min Quickstart - js - Angular 2 guide and get a strange error after calling "npm start":
> angular2-quickstart#1.0.0 start C:\Users\stavalfi\Desktop\plunkerExample
> npm run lite
> angular2-quickstart#1.0.0 lite C:\Users\stavalfi\Desktop\plunkerExample
> lite-server
'lite-server' is not recognized as an internal or external command,
operable program or batch file.
npm ERR! Windows_NT 6.1.7601
npm ERR! argv "C:\\Program Files (x86)\\nodejs\\\\node.exe" "C:\\Program Files (x86)\\nodejs\\node_modules\\npm\\bin\\npm-cli.js
" "run" "lite"
npm ERR! node v0.12.2
npm ERR! npm v2.7.4
npm ERR! code ELIFECYCLE
npm ERR! angular2-quickstart#1.0.0 lite: `lite-server`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the angular2-quickstart#1.0.0 lite script 'lite-server'.
npm ERR! This is most likely a problem with the angular2-quickstart package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! lite-server
npm ERR! You can get their info via:
npm ERR! npm owner ls angular2-quickstart
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! C:\Users\stavalfi\Desktop\plunkerExample\npm-debug.log
npm ERR! Windows_NT 6.1.7601
npm ERR! argv "C:\\Program Files (x86)\\nodejs\\\\node.exe" "C:\\Program Files (x86)\\nodejs\\node_modules\\npm\\bin\\npm-cli.js
" "start"
npm ERR! node v0.12.2
npm ERR! npm v2.7.4
npm ERR! code ELIFECYCLE
npm ERR! angular2-quickstart#1.0.0 start: `npm run lite`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the angular2-quickstart#1.0.0 start script 'npm run lite'.
npm ERR! This is most likely a problem with the angular2-quickstart package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! npm run lite
npm ERR! You can get their info via:
npm ERR! npm owner ls angular2-quickstart
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! C:\Users\stavalfi\Desktop\plunkerExample\npm-debug.log
Update: While installing "npm install lite-server -g", I get those errors:
MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0
SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed else
where. [C:\Users\stavalfi\AppData\Roaming\npm\node_modules\lite-server\node_modules\browser-sync\node_modules\socket.io\node_m
odules\engine.io\node_modules\ws\node_modules\utf-8-validate\build\binding.sln]
gyp ERR! build error
gyp ERR! stack Error: `C:\Program Files (x86)\MSBuild\14.0\bin\msbuild.exe` failed with exit code: 1
gyp ERR! stack at ChildProcess.onExit (C:\Program Files (x86)\nodejs\node_modules\npm\node_modules\node-gyp\lib\build.js:269
:23)
gyp ERR! stack at ChildProcess.emit (events.js:110:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1074:12)
gyp ERR! System Windows_NT 6.1.7601
gyp ERR! command "node" "C:\\Program Files (x86)\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\Users\stavalfi\AppData\Roaming\npm\node_modules\lite-server\node_modules\browser-sync\node_modules\socket.io\nod
e_modules\engine.io\node_modules\ws\node_modules\utf-8-validate
gyp ERR! node -v v0.12.2
gyp ERR! node-gyp -v v1.0.3
gyp ERR! not ok
> bufferutil#1.2.1 install C:\Users\stavalfi\AppData\Roaming\npm\node_modules\lite-server\node_modules\browser-sync\node_modules
\socket.io\node_modules\engine.io\node_modules\ws\node_modules\bufferutil
> node-gyp rebuild

Error code ENOENT means "no such file or directory".
You should check of you have the file C:\Users\stavalfi\package.json present and accessible by the application... Do you execute the command in the right folder?

Have you tried to update npm? I had some other problems with the 5 minute quick start, but after I updated npm I could run npm start without any errors.

Related

Sharp returning errors on npm install for M1 Big Sur

I'm trying to install sharp for my project. When running npm i and npm install sharp, I am receiving the same errors about sharp (shown below). I've tried installing libvip globally and locally, and read about every thread about this issue and cannot seem to find the right solution. Any suggestions are welcome.
rosetta error: /var/db/oah/223263137464320_223263137464320/e6ddd63cd8fd3b7ef226e2cad9a1bead9d7f41f60d7ece6edd0cdcc0c33c97c6/libxcrun.dylib.aot: attachment of code signature supplement failed: 1
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: null
gyp ERR! stack at ChildProcess.onExit (/Users/elektra.murphy/.nvm/versions/node/v11.11.0/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack at ChildProcess.emit (events.js:197:13)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:254:12)
gyp ERR! System Darwin 20.6.0
gyp ERR! command "/Users/elektra.murphy/.nvm/versions/node/v11.11.0/bin/node" "/Users/elektra.murphy/.nvm/versions/node/v11.11.0/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /Users/elektra.murphy/Desktop/Projects/node_modules/sharp
gyp ERR! node -v v11.11.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN enoent ENOENT: no such file or directory, open '/Users/elektra.murphy/Desktop/Projects/package.json'
npm WARN No description
npm WARN No repository field.
npm WARN No README data
npm WARN No license field.
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! sharp#0.23.2 install: `(node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy)`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the sharp#0.23.2 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/elektra.murphy/.npm/_logs/2021-10-12T08_24_48_579Z-debug.log
Found a solution for this in the Sharp docs: When using npm v6 or earlier, the npm install --unsafe-perm flag must be used when installing as root or a sudo user. Seems to have worked - now on to the next error!
Find more here on M1 installations:
https://sharp.pixelplumbing.com/install

While installing Web3js dependency it is showing node-gyp issue

I am trying to install a web3js dependency for my project. But there is an issue coming up with node-gyp.
Below is the error log for that"
> scrypt#6.0.3 preinstall D:\Learning\BlockChain Project\Inbox\node_modules\scrypt
> node node-scrypt-preinstall.js
> scrypt#6.0.3 install D:\Learning\BlockChain Project\Inbox\node_modules\scrypt
> node-gyp rebuild
D:\Learning\BlockChain Project\Inbox\node_modules\scrypt>if not defined npm_config_node_gyp (node "C:\Program Files\nodejs\node_modules\npm\node_modules\npm-lifecycle\node-gyp-bin\\..\..\node_modules\node-gyp\bin\node-gyp.js" rebuild ) else (node "C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js" rebuild )
gyp WARN install got an error, rolling back install
gyp ERR! configure error
gyp ERR! stack Error: unable to verify the first certificate
gyp ERR! stack at TLSSocket.onConnectSecure (_tls_wrap.js:1049:34)
gyp ERR! stack at TLSSocket.emit (events.js:182:13)
gyp ERR! stack at TLSSocket._finishInit (_tls_wrap.js:631:8)
gyp ERR! System Windows_NT 10.0.17134
gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd D:\Learning\BlockChain Project\Inbox\node_modules\scrypt
gyp ERR! node -v v10.15.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm WARN inbox#1.0.0 No description
npm WARN inbox#1.0.0 No repository field.
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! scrypt#6.0.3 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the scrypt#6.0.3 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\Shashank\AppData\Roaming\npm-cache\_logs\2019-01-19T18_07_03_360Z-debug.log
install windows-build-tools before installing web3 and its dependencies
npm install --global --production windows-build-tools
reference: https://github.com/nodejs/node-gyp
I had to install the above windows-build-tools but had to install with npm install --global --production windows-build-tools --vs2015 as the newer versions of this tool are going to not compile the web3 utils correctly with the node-gyp dependency. I wrangled this one for a while after uninstalling an old install of Visual Studio 2015 a couple of weeks ago.

trouble download npm package

Trying to download the dominos api package but keep getting this error. I have tried downloading the .NET framework 2.0 SDK but it stil isnt letting me download this. What am I missing?
$ npm i dominos
> node-expat#2.3.16 install C:\Users\engqu\Desktop\app\node_modules\node-expat
> node-gyp rebuild
C:\Users\engqu\Desktop\app\node_modules\node-expat>if not defined npm_config_node_gyp (node "C:\Program Files\nodejs\node_modules\npm\node_modules\npm-lifecycle\node-gyp-bin\\..\..\node_modules\node-gyp\bin\node-gyp.js" rebuild ) else (node "C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\bin\node-gyp.js" rebuild )
Warning: Missing input files:
C:\Users\engqu\Desktop\app\node_modules\node-expat\build\deps\libexpat\..\..\..\deps\libexpat\version.c
Building the projects in this solution one at a time. To enable parallel build, please add the "/m" switch.
MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [C:\Users\engqu\Desktop\app\node_modules\node-expat\build\binding.sln]
gyp ERR! build error
gyp ERR! stack Error: `C:\Windows\Microsoft.NET\Framework\v4.0.30319\msbuild.exe` failed with exit code: 1
gyp ERR! stack at ChildProcess.onExit (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\build.js:258:23)
gyp ERR! stack at emitTwo (events.js:126:13)
gyp ERR! stack at ChildProcess.emit (events.js:214:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:198:12)
gyp ERR! System Windows_NT 10.0.17134
gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\Users\engqu\Desktop\app\node_modules\node-expat
gyp ERR! node -v v8.11.3
gyp ERR! node-gyp -v v3.6.2
gyp ERR! not ok
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! node-expat#2.3.16 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the node-expat#2.3.16 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\engqu\AppData\Roaming\npm-cache\_logs\2018-07-29T08_12_30_456Z-debug.log
Did you try to install windows-build-tools? To install you need (as administrator in console):
npm install -g --production windows-build-tools

npm install for Hyperledger Tutorial Fails

I am currently working on a fresh minimal install of Ubuntu 16.0.4 using Hyperledger Fabric. I have pulled down a fresh install of the fabric samples from the Hyperledger documentation site. I have downloaded the following software:
node version 6.9.5
npm version 3.10.10
docker version 17.03.2-ce
golang version 1.7.6 (documentation now calls for newer version, but I think this is unrelated)
I can navigate to the fabcar directory which contains the default npm package.json. I first run ./startFabric as indicated in the instructions. I then run npm install, per the instructions. I then get the error:
u#ubmin2:~/fabric-samples/fabcar$ npm install
npm WARN deprecated crypto#0.0.3: This package is no longer supported. It's now a built-in Node module. If you've depended on crypto, you should switch to the one that's built-in.
> pkcs11js#1.0.9 install /home/u/fabric-samples/fabcar/node_modules/pkcs11js
> npm run build
> pkcs11js#1.0.9 build /home/u/fabric-samples/fabcar/node_modules/pkcs11js
> node-gyp configure build
gyp ERR! build error
gyp ERR! stack Error: not found: make
gyp ERR! stack at getNotFoundError (/usr/local/node/lib/node_modules/npm/node_modules/which/which.js:14:12)
gyp ERR! stack at F (/usr/local/node/lib/node_modules/npm/node_modules/which/which.js:69:19)
gyp ERR! stack at E (/usr/local/node/lib/node_modules/npm/node_modules/which/which.js:81:29)
gyp ERR! stack at /usr/local/node/lib/node_modules/npm/node_modules/which/which.js:90:16
gyp ERR! stack at /usr/local/node/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
gyp ERR! stack at /usr/local/node/lib/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
gyp ERR! System Linux 4.4.0-96-generic
gyp ERR! command "/usr/local/node/bin/node" "/usr/local/node/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
gyp ERR! cwd /home/u/fabric-samples/fabcar/node_modules/pkcs11js
gyp ERR! node -v v6.9.5
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok
npm ERR! Linux 4.4.0-96-generic
npm ERR! argv "/usr/local/node/bin/node" "/usr/local/node/bin/npm" "run" "build"
npm ERR! node v6.9.5
npm ERR! npm v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! pkcs11js#1.0.9 build: `node-gyp configure build`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the pkcs11js#1.0.9 build script 'node-gyp configure build'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the pkcs11js package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp configure build
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs pkcs11js
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls pkcs11js
npm ERR! There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?
...
Based on that, it appears that there is a missing pkcs11js module that needs to be included. When I add that module to the package.json file, remove the node_modules file and rerun the "npm install," the error shifts to:
u#ubmin2:~/fabric-samples/fabcar$ npm install
npm WARN deprecated crypto#0.0.3: This package is no longer supported. It's now a built-in Node module. If you've depended on crypto, you should switch to the one that's built-in.
> pkcs11js#1.0.9 install /home/u/fabric-samples/fabcar/node_modules/pkcs11js
> npm run build
> pkcs11js#1.0.9 build /home/u/fabric-samples/fabcar/node_modules/pkcs11js
> node-gyp configure build
gyp ERR! build error
gyp ERR! stack Error: not found: make
gyp ERR! stack at getNotFoundError (/usr/local/node/lib/node_modules/npm/node_modules/which/which.js:14:12)
gyp ERR! stack at F (/usr/local/node/lib/node_modules/npm/node_modules/which/which.js:69:19)
gyp ERR! stack at E (/usr/local/node/lib/node_modules/npm/node_modules/which/which.js:81:29)
gyp ERR! stack at /usr/local/node/lib/node_modules/npm/node_modules/which/which.js:90:16
gyp ERR! stack at /usr/local/node/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
gyp ERR! stack at /usr/local/node/lib/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
gyp ERR! System Linux 4.4.0-96-generic
gyp ERR! command "/usr/local/node/bin/node" "/usr/local/node/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
gyp ERR! cwd /home/u/fabric-samples/fabcar/node_modules/pkcs11js
gyp ERR! node -v v6.9.5
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok
npm ERR! Linux 4.4.0-96-generic
npm ERR! argv "/usr/local/node/bin/node" "/usr/local/node/bin/npm" "run" "build"
npm ERR! node v6.9.5
npm ERR! npm v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! pkcs11js#1.0.9 build: `node-gyp configure build`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the pkcs11js#1.0.9 build script 'node-gyp configure build'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the pkcs11js package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp configure build
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs pkcs11js
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls pkcs11js
npm ERR! There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?
npm ERR! Please include the following file with any support request:
npm ERR! /home/u/fabric-samples/fabcar/node_modules/pkcs11js/npm-debug.log
fabcar#1.0.0 /home/u/fabric-samples/fabcar
...
Does anyone understand why npm install is failing to run as expected?
------UPDATE------
in response to christo4ferris, sorry, I should have shown that as well. I've tried many things including installing and removing make. when I install make, I still get an error:
npm WARN fabcar#1.0.0 No repository field.
npm ERR! Linux 4.4.0-96-generic
npm ERR! argv "/usr/local/node/bin/node" "/usr/local/node/bin/npm" "install"
npm ERR! node v6.9.5
npm ERR! npm v3.10.10
npm ERR! path /home/u/fabric-samples/fabcar/node_modules
npm ERR! code EACCES
npm ERR! errno -13
npm ERR! syscall access
npm ERR! Error: EACCES: permission denied, access '/home/u/fabric-samples/fabcar/node_modules'
npm ERR! at Error (native)
npm ERR! { Error: EACCES: permission denied, access '/home/u/fabric-samples/fabcar/node_modules'
npm ERR! at Error (native)
npm ERR! errno: -13,
npm ERR! code: 'EACCES',
npm ERR! syscall: 'access',
npm ERR! path: '/home/u/fabric-samples/fabcar/node_modules' }
npm ERR!
npm ERR! Please try running this command again as root/Administrator.
npm ERR! Please include the following file with any support request:
npm ERR! /home/u/fabric-samples/fabcar/npm-debug.log
And then, when I run as sudo us to run as root, I get this error message:
root#ubmin2:/home/u/fabric-samples/fabcar# npm install
npm WARN deprecated crypto#0.0.3: This package is no longer supported. It's now a built-in Node module. If you've depended on crypto, you should switch to the one that's built-in.
> pkcs11js#1.0.9 install /home/u/fabric-samples/fabcar/node_modules/pkcs11js
> npm run build
> pkcs11js#1.0.9 build /home/u/fabric-samples/fabcar/node_modules/pkcs11js
> node-gyp configure build
gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/6.9.5"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/home/u/fabric-samples/fabcar/node_modules/pkcs11js/.node-gyp"
make: Entering directory '/home/u/fabric-samples/fabcar/node_modules/pkcs11js/build'
CXX(target) Release/obj.target/pkcs11/src/main.o
make: g++: Command not found
pkcs11.target.mk:107: recipe for target 'Release/obj.target/pkcs11/src/main.o' failed
make: *** [Release/obj.target/pkcs11/src/main.o] Error 127
make: Leaving directory '/home/u/fabric-samples/fabcar/node_modules/pkcs11js/build'
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/local/node/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:23)
gyp ERR! stack at emitTwo (events.js:106:13)
gyp ERR! stack at ChildProcess.emit (events.js:191:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:215:12)
gyp ERR! System Linux 4.4.0-96-generic
gyp ERR! command "/usr/local/node/bin/node" "/usr/local/node/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
gyp ERR! cwd /home/u/fabric-samples/fabcar/node_modules/pkcs11js
gyp ERR! node -v v6.9.5
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok
npm ERR! Linux 4.4.0-96-generic
npm ERR! argv "/usr/local/node/bin/node" "/usr/local/node/bin/npm" "run" "build"
npm ERR! node v6.9.5
npm ERR! npm v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! pkcs11js#1.0.9 build: `node-gyp configure build`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the pkcs11js#1.0.9 build script 'node-gyp configure build'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the pkcs11js package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp configure build
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs pkcs11js
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls pkcs11js
npm ERR! There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?
npm ERR! Please include the following file with any support request:
npm ERR! /home/u/fabric-samples/fabcar/node_modules/pkcs11js/npm-debug.log
fabcar#1.0.0 /home/u/fabric-samples/fabcar
Thank you.
The issue was that I was missing a necessary c++ compiler. It seems it was not included in the Ubuntu minimal installation, which makes sense, but the errors seemed very opaque. Running sudo apt install build-essential g++ seems to have solved the problem.
I'm not sure if it was necessary, but I also needed to add alias sudo='sudo env PATH=$PATH' to my .bashrc file so I could run npm with sudo. That solution came from this link.

Npm compiler : Cannot read property 'startsWith' of undefined

I did setup https://github.com/vuejs/vue-cli Vue CLI with the webpack template and it works fine.
But when i change something in template file it throws below error.
Kindly help on the below issue,
> Starting dev server...
DONE Compiled successfully in 2703ms 6:00:35 PM
> Listening at http://localhost:8083
WAIT Compiling... 6:01:05 PM
c:\xampp\htdocs\myproject\node_modules\enhanced-resolve\lib\CachedInputFileSy
stem.js:145
if(key.startsWith(what))
^
TypeError: Cannot read property 'startsWith' of undefined
at Storage.purge (c:\xampp\htdocs\myproject\node_modules\enhanced-resolve
\lib\CachedInputFileSystem.js:145:10)
at Storage.purge (c:\xampp\htdocs\myproject\node_modules\enhanced-resolve
\lib\CachedInputFileSystem.js:150:9)
at CachedInputFileSystem.purge (c:\xampp\htdocs\myproject\node_modules\en
hanced-resolve\lib\CachedInputFileSystem.js:259:20)
at EventEmitter.watcher.once (c:\xampp\htdocs\myproject\node_modules\webp
ack\lib\node\NodeWatchFileSystem.js:42:26)
at EventEmitter.g (events.js:291:16)
at emitTwo (events.js:106:13)
at EventEmitter.emit (events.js:191:7)
at EventEmitter._onTimeout (c:\xampp\htdocs\myproject\node_modules\watchp
ack\lib\watchpack.js:142:7)
at ontimeout (timers.js:380:14)
at tryOnTimeout (timers.js:244:5)
at Timer.listOnTimeout (timers.js:214:5)
npm ERR! Windows_NT 6.1.7601
npm ERR! argv "C:\\Program Files (x86)\\nodejs\\node.exe" "C:\\Program Files (x8
6)\\nodejs\\node_modules\\npm\\bin\\npm-cli.js" "run" "dev"
npm ERR! node v6.10.2
npm ERR! npm v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! dktrgo#1.0.0 dev: `node build/dev-server.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the dktrgo#1.0.0 dev script 'node build/dev-server.js'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the dktrgo package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node build/dev-server.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs dktrgo
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls dktrgo
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! c:\xampp\htdocs\myproject\npm-debug.log
Thank you
I was able to reproduce in v3.4.0, but not in v3.4.1 (which was released about 5 hours later).
To confirm you're on v3.4.0:
npm list enhanced-resolve
Please update enhanced-resolve to v3.4.1:
npm i enhanced-resolve