I am new to Neo4j, everything works fine, but, when the graph is displayed and when I click on a node no popup appears showing the properties.
My install:
Neo4j Community Edition, 2.3.0, Intel Core I7, windows 8, firefox or safari or chrome (and Norton security)
same with Linux Debian 8 same with Windows xp (and ZoneAlarm)
Thanks.
Michel.
You may be familiar with older versions of Neo4j where a pop-up with the properties appears. In newer versions (starting with 2.2) the properties appear at the bottom of the graph visualization window when you hover over a node. When you single click on a node those properties stay there (unless you're hovering over another node). If you don't see all the properties, click on the black disclosure triangle in the lower right of the graph visualization window.
Pro-tip: If you want to change the style of how nodes of a particular label display, click on the label at the top of the graph visualization window and then you'll be able to choose the color and size of the nodes as well as which properties is displayed inside of each node.
Related
Is there a way to make plots appear in an integrated window on spyder (like in the help space) instead of inline (not practical and no way to zoom) and not as a pop-up window (in my case it always appears on a different space as I use spyder in full screen mode)?
I tried the OSX/Qt4/QT5 settings and they still appear on a separate window.
I would want the same setting as in RStudio where I can go back and forth between plots and not have to deal with windows 'floating' around. Is there a way to work it that way or it does not exist yet?
(Spyder maintainer here) A dedicated pane that shows all plots generated in our consoles is already implemented and will be part of our next major version (Spyder 4, to be released in 2019). Here you can find some screenshots of that pane.
There is a problem in my IntelliJ IDEA. When I open Find in Path it is shown in a modal window in the second monitor instead in a window inside the main window like it did before. There is no way to move that window to main monitor. I don't remember if I change some configuration which caused this problem, but I'm pretty sure not.
I tried to restore default window configuration in Window/Restore Default Layout. But it didn't help. I'd like to restore the previous behavior without reset all configurations (by delete the config folder), since there is a lot configuration I've to do in IntelliJ IDEA before I can get to work.
Below is an image of both monitor windows.
IntelliJ IDEA 2018.1.4 (Community Edition)
Build #IC-181.5087.20, built on May 16, 2018
JRE: 1.8.0_152-release-1136-b39 amd64
JVM: OpenJDK 64-Bit Server VM by JetBrains s.r.o
Linux 4.13.0-39-generic
I realize this post is quite old, but I just had the same problem. I could solve it by removing the state of the popup in the workspace.xml. You do not have to delete all you configurations etc for the project.
Just go to workspace.xml -> <component name="WindowStateProjectService"> and then find the problematic popup and delete its state. For me this solved the problem, it's possible though that you actually have to set the x and y coordinates to have the popup show up at the right place (I didn't need to fwiw).
Besides changing configuration file, alternative for me solution (Linux, Ubuntu) is:
closing "Find in path" window with ESC,
opening it again Ctrl+Shift+F.
Only on initial open one will get handle to resize window's width to smaller width then screen if one goes far left or right to the edge of "Find in path" dialog.
When resized to smaller width then screen width, one will be able to
move this dialog to another screen (it seems this is happening due
window edge snapping)
Hope this helps.
After you click on the window header keep moving the mouse pointer to the other monitor until the find window jumps to the other monitor. In some cases you have to move the mouse quite a bit.
Looks like the window can not be in two monitors at the same time.
I have Android Studio 3.6.1
For Mac OS I found that the best solution is to change your main display by draggin the menu bar to where you want your "Find in files"-popup.
I had the same problem with IntelliJ 2020.3.3: The "Find in Path" Window always appeared on the laptop screen instead of the main screen. It was full-width (but not full-height), and I was able to move and resize it vertically, but not horizontally - and thus not onto the screen to the right.
But I was able to drag the window by holding the "Alt"-key while dragging. It was the again-fullwidth on the other, correct screen, but still not resizable in width. After closing and opening again it was still on the correct screen, and not full-width anymore.
Installed Enthought Canopy IDE Python 2.7 for Windows 64 bit but IDE window is zoomed out too far. Control ++ and Control Shift ++ are not working in IDE on windows. What are the key options to fix this.
Welcome Screen and Package Manger both are zoomed far out.
User submitted a support ticket with screen shots. For the record, this is nothing about zooming or windows magnification.
There were two windows that don't display nicely when filling a full screen -- one had been accidentally maximized, the other had been accidentally resized to fill the full screen (same dimensions as maximized). So there was lots of extra fill space in each of these windows. The solution was to return them to their expected size, by unmaximizing / restoring in the first case, and by resizing in the second case.
http://meta.stackexchange.com/questions/5234/how-does-accepting-an-answer-work
Is it possible to take screenshot of Petrel's child windows (programmatically) from the plugin using Ocean 2014.1? At the moment, I can save BMP for Window3D and EMF for other derives of ToggleWindow and read them again from my plugin, but, this doesn't work for all Petrel's child windows. Also, I would prefer to get raster image (like what I get when I push on Camera button action in Clipboard action group, Home tab) and support other windows like Histogram Window, Plot Window, etc.
Unfortunately I don't think Ocean has a common API that does what you want.
As you found out, some windows have methods that allow you to capture an Image dump of the window, but it is far from being generic.
I want to move back/forward between editor tabs, using the two additional ("virtual") mouse buttons I have (RAZER DEATHADDER BLACK).
In Eclipse it's possible by default.
In IDEA I go to File->Settings->Keymap->Main menu->Window->Editor Tabs.
There I have Select Next Tab with the deault Alt+Right shortcut.
Then I open the Add Mouse Shortcut.
In that dialog I try to assign the back button of my mouse but without success. It doesn't react at all.
Anyway, googling a bit I've found this thread. I quote Alexey Gopachenko which seems to be an employee of IntelliJ:
As stated above - we can't support buttons if JDK on your platform
does not support them - and obviously it does not.
Anyway, that is totally wrong. My platform does support these keys - I actually work with them, on the same platform, on Eclipse and any other app, so it's IDEA who ignores them.
I'd appriciate a solution - how do I assign these back/forward mouse buttons?
UPDATE #1
I've found out that IDEA uses its own JAVA distribution (C:\Program Files (x86)\JetBrains\IntelliJ IDEA 11.1.4\jre on Windows 7), instead of the system's one - WHY?!
I'm almost SURE that is the reason I cannot use extended mouse buttons.
I've tried to trick IDEA by creating a custom Windows shortcut. Didn't work. I've also tried to create a SYMLINK in windows to my other, system-wide JRE distribution. Didn't work as well.
If someone come up with an idea on how to make it work with the system's JRE instead of its own - I think that'd solve the issue.
UPDATE #2
The above update #1 is not the issue.
I also had the same problem under OS X El Capitan. I just tried to add a new Keyboard-Shortcut and pressed than the Button 4 on the mouse and this worked.
Back/Forward mouse shortcuts work fine for me with Razer Mamba mouse, for example Back action is assigned to Button4 Click and I can confirm that it is recognized in this dialog when I click on the Click Pad area:
If it doesn't work with your mouse for some reason, you can try to workaround the problem using the Razer Configurator macro or key assignments:
Use the assigned key in IDEA keymap settings instead of the mouse shortcut.
Note that Eclipse is SWT based while IDEA is Swing based, so mouse event management is completely different. If JDK cannot recognize your device button clicks, it will not work in any Java Swing applications (NetBeans, JEdit, etc). In some cases running IDEA under a more recent JDK version may help (if support for your device was added in the newer JDK release).
I'm experiencing the exact same thing suddenly.
I realized my most recent change was to start using idea64.exe rather than idea.exe.
I switched back, and my mouse buttons are working fine again.
So, while this is not a complete answer, it seems as if it has something to do with the 64-bit version.
If the Razer driver's button mapping feature doesn't allow different mappings for a particular program, you can just assign the buttons to the mouse button number choices (mouse button 4 / mouse button 5) and then install a third party app that does support mappings for particular programs, e.g. https://superuser.com/questions/562972/how-to-map-bind-mouse-button-as-keyboard-button-in-windows-7
This question helped me although I have a Logitech Marathon Mouse M705, so I thought that I would share the solution in case other Logitech owners was in search for this.
I have a similar problem with a Logitech mouse and idea64.exe
Fortunately their SetPoint software allows for program specific settings.
This setting will have to be deleted and then reconfigured whenever you update IntelliJ and get a new idea64.exe :-)
I am experiencing a very similar problem and wanted to share my findings. I just bought a new Logitech M705 mouse. Within intelli-j the scroll right and scroll left buttons do not work. The forward and backward buttons also do not work.
I typically run intelli-j as administrator because I need higher privileges to run various tomcat services. When logging in as that user (rather than right clicking and selecting run as admin) all the buttons work! Also, when running as my normal user all the buttons work.
Also very curious is that I have an older generation Logitech mouse (same model, M705). This mouse has no problems with the scroll buttons and forward-back.
My solution for now is to use intelli-j as the user I am logged in as.
Check out this little tutorial from BetterTouchTool here. Basically for some mice (like Logitech ones) using the settings application they come with you can map default button actions to clicks and in doing so set a button number and use it as normal.
This works for my Logitech Performance MX mouse.
You can add mouse shortcuts, just click on an action in keymap and add mouse shortcut.
Alternatively Ctrl+Tab brings up switcher, which may be less clicks to navigate.