I was tring installing HPCToolkit following this tutorial:
http://hpctoolkit.org/software-instructions.html#Prerequisites
and, after entering "Spack install hpctoolkit" I got some error messages
2 errors found in build log:
10 checking whether make supports nested variables... yes
11 checking whether make sets $(MAKE)... (cached) yes
12 checking for x86_64-conda-linux-gnu-gcc... /home/ncaa/spack/lib/spack/env/gcc/gcc
13 checking whether the C compiler works... yes
14 checking for C compiler default output file name... a.out
15 checking for suffix of executables...
>> 16 checking whether we are cross compiling... configure: error: in `/tmp/ncaa/spack-stage/spack-stage-libiconv-1.16-e7emipnlb4kfxggwdzwb7fgpbu5hpupy/spack-src':
>> 17 configure: error: cannot run C compiled programs.
18 If you meant to cross compile, use `--host'.
19 See `config.log' for more details
See build log for details:
/tmp/ncaa/spack-stage/spack-stage-libiconv-1.16-e7emipnlb4kfxggwdzwb7fgpbu5hpupy/spack-build-out.txt
spack-build-out.txt:
==> libiconv: Executing phase: 'autoreconf'
==> libiconv: Executing phase: 'configure'
==> [2021-03-13-20:45:16.501013] Copying ./build-aux/config.guess to libcharset/build-aux/config.guess
==> [2021-03-13-20:45:16.510159] '/tmp/ncaa/spack-stage/spack-stage-libiconv-1.16-e7emipnlb4kfxggwdzwb7fgpbu5hpupy/spack-src/configure' '--prefix=/home/ncaa/spack/opt/spack/linux-centos7-x86_64/gcc-8.4.0/libiconv-1.16-e7emipnlb4kfxggwdzwb7fgpbu5hpupy' '--enable-extra-encodings'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make sets $(MAKE)... (cached) yes
checking for x86_64-conda-linux-gnu-gcc... /home/ncaa/spack/lib/spack/env/gcc/gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/tmp/ncaa/spack-stage/spack-stage-libiconv-1.16-e7emipnlb4kfxggwdzwb7fgpbu5hpupy/spack-src':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
config.log (on OneDrive):https://1drv.ms/u/s!Ah8JdDB38REth3K7XSgq6TZQ46eV?e=4z2bQI
my platform and user environment
(env0) [ncaa#localhost ~]$ uname -a
Linux localhost.localdomain 3.10.0-229.el7.x86_64 #1 SMP Fri Mar 6 11:36:42 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
(env0) [ncaa#localhost ~]$ cat /etc/redhat-release
CentOS Linux release 7.1.1503 (Core)
(env0) [ncaa#localhost ~]$ gcc --version
gcc (crosstool-NG 1.24.0.133_b0863d8_dirty) 8.4.0
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
(env0) [ncaa#localhost ~]$ rpm -qa | grep glibc
glibc-2.17-157.el7_3.2.i686
compat-glibc-headers-2.12-4.el7.centos.x86_64
glibc-common-2.17-157.el7_3.2.x86_64
glibc-devel-2.17-157.el7_3.2.i686
compat-glibc-2.12-4.el7.centos.x86_64
glibc-2.17-157.el7_3.2.x86_64
glibc-devel-2.17-157.el7_3.2.x86_64
glibc-headers-2.17-157.el7_3.2.x86_64
(env0) [ncaa#localhost ~]$ spack config get compilers
compilers:
- compiler:
spec: gcc#8.4.0
paths:
cc: /home/ncaa/anaconda3/envs/env0/bin/gcc
cxx: /home/ncaa/anaconda3/envs/env0/bin/g++
f77:
fc:
flags: {}
operating_system: centos7
target: x86_64
modules: []
environment: {}
extra_rpaths: []
config.yaml (on OneDrive):https://1drv.ms/u/s!Ah8JdDB38REth3P-jV-PP9P-bSjS?e=6ucN9e
packages.yaml (on OneDrive):https://1drv.ms/u/s!Ah8JdDB38REth3RTTTJGckufGQVT?e=fFs2YH
running "spack install xz" gives:
(env0) [ncaa#localhost ~]$ spack install xz
==> Installing xz-5.2.5-ilny777kxpjghq6abvl7hv5skt5sxo3k
==> No binary for xz-5.2.5-ilny777kxpjghq6abvl7hv5skt5sxo3k found: installing from source
==> Using cached archive: /home/ncaa/spack/var/spack/cache/_source-cache/archive/51/5117f930900b341493827d63aa910ff5e011e0b994197c3b71c08a20228a42df.tar.bz2
==> No patches needed for xz
==> xz: Executing phase: 'autoreconf'
==> xz: Executing phase: 'configure'
==> Error: ProcessError: Command exited with status 1:
'/tmp/ncaa/spack-stage/spack-stage-xz-5.2.5-ilny777kxpjghq6abvl7hv5skt5sxo3k/spack-src/configure' '--prefix=/home/ncaa/spack/opt/spack/linux-centos7-x86_64/gcc-8.4.0/xz-5.2.5-ilny777kxpjghq6abvl7hv5skt5sxo3k'
2 errors found in build log:
34 checking whether ln -s works... yes
35 checking whether make supports the include directive... yes (GNU style)
36 checking for x86_64-conda-linux-gnu-gcc... /home/ncaa/spack/lib/spack/env/gcc/gcc
37 checking whether the C compiler works... yes
38 checking for C compiler default output file name... a.out
39 checking for suffix of executables...
>> 40 checking whether we are cross compiling... configure: error: in `/tmp/ncaa/spack-stage/spack-stage-xz-5.2.5-ilny777kxpjghq6abvl7hv5skt5sxo3k/spack-src':
>> 41 configure: error: cannot run C compiled programs.
42 If you meant to cross compile, use `--host'.
43 See `config.log' for more details
See build log for details:
/tmp/ncaa/spack-stage/spack-stage-xz-5.2.5-ilny777kxpjghq6abvl7hv5skt5sxo3k/spack-build-out.txt
It seems the problem has something to do with cross compiling check
switching gcc version to 7.3.0 fixed this problem. The cross compiling check get result "no" now.
I am trying to install RabbitMQ (3.6.1) on linux machine Red Hat Enterprise Linux Server release 6.6. To install rabbitMQ , first I have installed Erlang R16B03 version from source (otp_src_R16B03) and followed below commands
wget http://www.erlang.org/download/otp_src_R16B03.tar.gz
tar xvfz /usr/tmp/otp_src_R16B03.tar
cd otp_src_R16B03
LANG=C; export LANG
./configure --with-ssl=/usr/bin
I get the message shown below:
*********************************************************************
********************** APPLICATIONS DISABLED **********************
*********************************************************************
crypto : OpenSSL is configured for kerberos but no krb5.h found
jinterface : No Java compiler found
odbc : ODBC library - link check failed
orber : No C++ compiler found
ssh : OpenSSL is configured for kerberos but no krb5.h found
ssl : OpenSSL is configured for kerberos but no krb5.h found
*********************************************************************
*********************************************************************
********************** APPLICATIONS INFORMATION *******************
*********************************************************************
wx : wxWidgets not found, wx will NOT be usable
*********************************************************************
though I continued with make & make install but while starting Rabbitmq server I get the following error
sbin/rabbitmq-server
Getting message
BOOT FAILED
===========
Error description:
{error,{missing_dependencies,[crypto,ssl],[mochiweb,cowlib,cowboy]}}
Log files (may contain more information):
/usr/tmp/rabbitmq_server-3.6.1/var/log/rabbitmq/rabbit.log
/usr/tmp/rabbitmq_server-3.6.1/var/log/rabbitmq/rabbit-sasl.log
Stack trace:
[{rabbit_plugins,ensure_dependencies,1,
[{file,"src/rabbit_plugins.erl"},{line,179}]},
{rabbit_plugins,prepare_plugins,1,
[{file,"src/rabbit_plugins.erl"},{line,198}]},
{rabbit,broker_start,0,[{file,"src/rabbit.erl"},{line,284}]},
{rabbit,start_it,1,[{file,"src/rabbit.erl"},{line,303}]},
{init,start_it,1,[]},
{init,start_em,1,[]}]
{"init terminating in do_boot",{error,{missing_dependencies,[crypto,ssl],[mochiweb,cowlib,cowboy]}}}
Crash dump was written to: erl_crash.dump
init terminating in do_boot ()
After exploring multiple solution I understood that I need to install latest Openssl and provide the path of newly installed openssl.
I installed Openssl from the source and installed with -fPIC
wget https://www.openssl.org/source/openssl-1.0.2.tar.gz
tar xvfz /usr/tmp/openssl-1.0.2.tar.gz
cd /usr/tmp/openssl-1.0.2
./config -fPIC
make
make install
Now new openssl is installed in bin/local/ssl location and I have reinstalled the Erlang with below configuration
export PATH="/usr/local/ssl/bin:$PATH”
export CFLAGS=-fPIC
cd /usr/tmp/otp_src_RB1603
LANG=C; export LANG
./configure --with-ssl=/usr/local/bin
make
make install
now I get the error
/usr/bin/ld: /usr/local/ssl/lib/libcrypto.a(rsaz_exp.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC
/usr/local/ssl/lib/libcrypto.a: could not read symbols: Bad value**
collect2: ld returned 1 exit status
make[6]: *** [../priv/lib/x86_64-unknown-linux-gnu/crypto.so] Error 1
make[6]: Leaving directory `/var/tmp/otp_src_R16B03/lib/crypto/c_src'
make[5]: *** [release_spec] Error 2
make[5]: Leaving directory `/var/tmp/otp_src_R16B03/lib/crypto/c_src'
make[4]: *** [release] Error 2
make[4]: Leaving directory `/var/tmp/otp_src_R16B03/lib/crypto/c_src'
make[3]: *** [release] Error 2
make[3]: Leaving directory `/var/tmp/otp_src_R16B03/lib/crypto/c_src'
make[2]: *** [release] Error 2
make[2]: Leaving directory `/var/tmp/otp_src_R16B03/lib/crypto'
make[1]: *** [release] Error 2
make[1]: Leaving directory `/var/tmp/otp_src_R16B03/lib'
make: *** [install.libs] Error 2
I could not resolve this error , any suggestion..
Please note I am using accessing machine as root user
/usr/bin/ld: /usr/local/ssl/lib/libcrypto.a(rsaz_exp.o): relocation R_X86_64_32 against `.rodata'
can not be used when making a shared object; recompile with -fPIC
/usr/local/ssl/lib/libcrypto.a: could not read symbols: Bad value**
collect2: ld returned 1 exit status
You need to build OpenSSL with the shared option. Maybe something like the following for a 64-bit Intel machine.
wget https://www.openssl.org/source/openssl-1.1.0b.tar.gz
tar xzf openssl-1.1.0b.tar.gz
cd openssl-1.1.0b
./Configure no-ssl2 no-ssl3 shared enable-ec_nistp_64_gcc_128
...
make -j 8
...
make test
...
suod make install
enable-ec_nistp_64_gcc_128 make EC Diffie-Hellman 2x to 4x faster, but it has some limitations. You are OK to use it on a 64-bit Intel machine. Also see Compilation and Installation | Configure Options on the OpenSSL wiki.
Also, be sure to either make dclean for OpenSSL 1.0.2 and below; or make distclean for OpenSSL 1.1.0 and above. Otherwise, some of the old configuration lingers even after changing the option.
I am using Wind River Workbench 3.3 and VxWorks 6.8. When using building from the command line everything works, but when I attempt to build within Workbench I get errors. In attempting to track it down, I have determined that the same problem occurs when creating a new VxWorks Image Project using our board support package and the gnu tool chain.
I created a new project and attempt to build it in the default_romCompress build spec. I get the following errors.
romInit.o: In function `delay_100us':
C:/WindRiver/vxworks-6.8/target/config/mrim/romInit.s:649: undefined reference to `romStart'
C:/WindRiver/vxworks-6.8/target/config/mrim/romInit.s:650: undefined reference to `romStart'
make.exe[1]: *** [vxWorks_romCompress] Error 1
rm ipcom_ipdomain
make.exe[1]: Leaving directory `D:/WindRiverWorkbench/Test/default_romCompress'
C:\WindRiver\utilities-1.0\x86-win32\bin\make.exe: *** [target_vxWorks] Error 2
Build Failed in Project 'Test' (Process Exit Value was 2): 2014-01-14 17:22:11 (Elapsed Time: 00:06)
the symbol romStart is defined in romStart.c, which is part of the project. When I attempt to compile just romStart.c I get the following output.
Build Started in Project 'Test': 2014-01-15 08:57:25
Generation of makefiles started.
Generation of makefiles finished (Elapsed Time: 00:00).
Platform: Wind River VxWorks 6.8
Command: make BUILD_SPEC=default_romCompress DEBUG_MODE=0 TRACE=1 default_romCompress/romStart.o
Working Directory: D:/WindRiverWorkbench/Test
make.exe[1]: Entering directory `D:/WindRiverWorkbench/Test'
make.exe[2]: Entering directory `D:/WindRiverWorkbench/Test/default_romCompress'
ccppc -c -DCPU_VARIANT=_ppc860 -g -msoft-float -mstrict-align -ansi -fno-builtin -Wall -D_VSB_CONFIG_FILE=\"C:/WindRiver/vxworks-6.8/target/lib/h/config/vsbConfig.h\" -mcpu=860 -I.. -IC:/WindRiver/vxworks-6.8/target/config/mrim -IC:/WindRiver/vxworks-6.8/target/h -IC:/WindRiver/vxworks-6.8/target/config/comps/src -IC:/WindRiver/vxworks-6.8/target/h/wrn/coreip -IC:/WindRiver/vxworks-6.8/target/src/drv -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=sfgnu -DPRJ_BUILD -D_WRS_KERNEL -IC:/WindRiver/components/windml-5.3/h -IC:/WindRiver/components/webservices-1.7/h -IC:/WindRiver/components/webcli-4.8/target/h -IC:/WindRiver/components/opc-3.2/h -IC:/WindRiver/components/dcom-2.3/h -IC:/WindRiver/components/windml-5.3/osconfig/vxworks/src -IC:/WindRiver/components/ip_net2-6.8/osconfig/vxworks/src -IC:/WindRiver/components/windml-5.3/osconfig/vxworks/h -IC:/WindRiver/components/ip_net2-6.8/osconfig/vxworks/h -IC:/WindRiver/vxworks-6.8/target/src/hwif -IC:/WindRiver/vxworks-6.8/target/src/hwif/h #./ipcom_ipdomain -DIP_PORT_VXWORKS=68 -DINET -UCPU -DCPU=PPC860 -I. -MD -fvolatile -G8 -msdata=eabi -DROM_COMPRESS -DRAM_DATA_ADRS=0x00e00000 -DRAM_DST_ADRS=0x00010000 C:/WindRiver/vxworks-6.8/target/config/comps/src/romStart.c -o romStart.o
ccppc: #./ipcom_ipdomain: No such file or directory
make.exe[2]: *** [romStart.o] Error 1
make.exe[2]: Leaving directory `D:/WindRiverWorkbench/Test/default_romCompress'
make.exe[1]: *** [compile_romStart.o] Error 2
make.exe[1]: Leaving directory `D:/WindRiverWorkbench/Test'
C:\WindRiver\utilities-1.0\x86-win32\bin\make.exe: *** [default_romCompress/romStart.o] Error 2
Build Failed in Project 'Test' (Process Exit Value was 2): 2014-01-15 08:57:26 (Elapsed Time: 00:01)
However, if I attempt to compile romStart.c a second time, then it succeeds
If I again try to build the project (not clean and not rebuild), then it fails again with the following output.
Build Started in Project 'Test': 2014-01-15 08:58:36
Generation of makefiles started.
Generation of makefiles finished (Elapsed Time: 00:00).
Platform: Wind River VxWorks 6.8
Command: make BUILD_SPEC=default_romCompress DEBUG_MODE=0 TRACE=1
Working Directory: D:/WindRiverWorkbench/Test
building default vxWorks image of D:/WindRiverWorkbench/Test
make.exe[1]: Entering directory `D:/WindRiverWorkbench/Test/default_romCompress'
cp vxWorks vxWorks.o
true vxWorks.o
objcopyppc -O binary --binary-without-bss vxWorks.o tmp.bin
VX_CPU_FAMILY=ppc C:/WindRiver/vxworks-6.8/host/x86-win32/bin/deflate < tmp.bin > tmp.Z
Deflation: 53.98%
VX_CPU_FAMILY=ppc C:/WindRiver/vxworks-6.8/host/x86-win32/bin/binToAsm tmp.Z > vxWorks.Z.s
ccppc -c -DCPU_VARIANT=_ppc860 -g -msoft-float -mstrict-align -ansi -fno-builtin -xassembler-with-cpp -D_VSB_CONFIG_FILE=\"C:/WindRiver/vxworks-6.8/target/lib/h/config/vsbConfig.h\" -mcpu=860 -I.. -IC:/WindRiver/vxworks-6.8/target/config/mrim -IC:/WindRiver/vxworks-6.8/target/h -IC:/WindRiver/vxworks-6.8/target/config/comps/src -IC:/WindRiver/vxworks-6.8/target/h/wrn/coreip -IC:/WindRiver/vxworks-6.8/target/src/drv -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=sfgnu -DPRJ_BUILD -D_WRS_KERNEL -IC:/WindRiver/components/windml-5.3/h -IC:/WindRiver/components/webservices-1.7/h -IC:/WindRiver/components/webcli-4.8/target/h -IC:/WindRiver/components/opc-3.2/h -IC:/WindRiver/components/dcom-2.3/h -IC:/WindRiver/components/windml-5.3/osconfig/vxworks/src -IC:/WindRiver/components/ip_net2-6.8/osconfig/vxworks/src -IC:/WindRiver/components/windml-5.3/osconfig/vxworks/h -IC:/WindRiver/components/ip_net2-6.8/osconfig/vxworks/h -IC:/WindRiver/vxworks-6.8/target/src/hwif -IC:/WindRiver/vxworks-6.8/target/src/hwif/h #./ipcom_ipdomain -DIP_PORT_VXWORKS=68 -DINET -UCPU -DCPU=PPC860 -I. -MD vxWorks.Z.s -o vxWorks.Z.o
ccppc: #./ipcom_ipdomain: No such file or directory
make.exe[1]: *** [vxWorks_romCompress] Error 1
make.exe[1]: Leaving directory `D:/WindRiverWorkbench/Test/default_romCompress'
C:\WindRiver\utilities-1.0\x86-win32\bin\make.exe: *** [target_vxWorks] Error 2
Build Failed in Project 'Test' (Process Exit Value was 2): 2014-01-15 08:58:37 (Elapsed Time: 00:01)
Can anyone suggest how I might go about fixing these problems?
I've been compiling Httpd 2.4.6 in Solaris 10 in a SPARC machine from last Monday. I get some errors that I have no idea how to fix.
I've successfully compile the Httpd 2.4.6 in Solaris 10 x86, according this article:
Compile Apache 2.4.2 in Solaris 10 in a x86 machine (64bits) errors
I tried several compiler flags, which failed with different errors.
Here is the steps how I did the build:
export PATH=/usr/sbin:/usr/bin:/usr/local/bin:/usr/xpg4/bin:/usr/sfw/bin:/usr/sfw/sbin:/usr/ccs/bin
#export LDFLAGS=" -L/usr/sfw/lib -R/usr/sfw/lib -L/usr/X/lib -R/usr/X/lib -L/usr/X11/lib -R/usr/X11/lib -L/usr/ccs/lib -R/usr/ccs/lib "
#export LDFLAGS="-L/usr/sfw/lib/sparcv9 -L/usr/lib/sparcv9 -L/usr/sfw/lib -R/usr/sfw/lib -L/usr/X/lib -R/usr/X/lib -L/usr/X11/lib -R/usr/X11/lib -L/usr/ccs/lib -R/usr/ccs/lib "
#export LDFLAGS="-L/usr/local/lib -R/usr/local/lib -R/usr/lib -L/usr/lib -R/usr/openwin/lib -L/usr/openwin/lib -L/usr/local/ssl/lib -R/usr/local/ssl/lib -L/usr/local/BerkeleyDB.4.2/lib -R/usr/local/BerkeleyDB.4.2/lib -L/usr/sfw/lib/sparcv9 -L/usr/lib/sparcv9 -L/usr/sfw/lib -R/usr/sfw/lib -L/usr/X/lib -R/usr/X/lib -L/usr/X11/lib -R/usr/X11/lib -L/usr/ccs/lib -R/usr/ccs/lib "
#export LD_LIBRARY_PATH=/usr/lib:/usr/sfw/lib
#export LD_LIBRARY_PATH_64=/usr/lib/64:/usr/sfw/lib/64
#Dont use CC, use GCC! This is VERY important. It wont work otherwise!!
export CC=gcc
#export CFLAGS="-m64 -O3"
export CFLAGS="-m64 -O2 -L/usr/local/lib -R/usr/local/lib -L/usr/local/ssl/lib -R/usr/local/ssl/lib -L/usr/openwin/lib -R/usr/openwin/lib -I/usr/local/rrdtool-1.2.19/include -I/usr/local/BerkeleyDB.4.7/include -I/usr/local/include/cairo"
export CPPFLAGS="-m64 -I/usr/local/include -I/usr/local/ssl/include -I/usr/local/include/ncurses -I/usr/openwin/include -I/usr/local/rrdtool-1.2.19/include -I/usr/local/BerkeleyDB.4.7/include -I/usr/local/include/lzo"
export LDFLAGS="-L/usr/local/lib -R/usr/local/lib -R/usr/lib -L/usr/lib -R/usr/openwin/lib -L/usr/openwin/lib -L/usr/local/ssl/lib -R/usr/local/ssl/lib -L/usr/X11R6/lib -R/usr/X11R6/lib -L/usr/local/BerkeleyDB.4.7/lib -R/usr/local/BerkeleyDB.4.7/lib"
#export CFLAGS=” -O2 -mcpu=v9 -m64″
#export CPP_FLAGS="-m64 -O3"
#export CPP_FLAGS="-m64 -O3 -I/usr/sfw/include -I/usr/local/include -I/usr/local/ssl/include -I/usr/local/include/ncurses -I/usr/local/BerkeleyDB.4.2/include -I/usr/openwin/include"
#export CPP_FLAGS="-I/usr/sfw/include"
#export CXX_FLAGS="-m64 -O3"
bzip2 -dc apr-1.4.8.tar.bz2 | tar xf -
bzip2 -dc apr-util-1.5.2.tar.bz2 | tar xf -
bzip2 -dc httpd-2.4.6.tar.bz2.tar.bz2.tar.bz2 | tar xf -
mv apr-util-1.5.2/ httpd-2.4.6/srclib/apr-util
mv apr-1.4.8/ httpd-2.4.6/srclib/apr
gzip -dc m4-1.4.17.tar.gz | tar xf -
cd m4-1.4.17
./configure --prefix=/opt/cmtools/m4-1.4.17
gmake
gmake install
gmake clean
gzip -dc autoconf-2.69.tar.gz | tar xf -
cd autoconf-2.69
./configure --prefix=/opt/cmtools/autoconf-2.69 M4=/opt/cmtools/m4-1.4.17/bin/m4
gmake
gmake install
gmake clean
gzip -dc automake-1.13.2.tar.gz | tar xf -
cd automake-1.13.2
./configure --prefix=/opt/cmtools/automake-1.13.2 PATH=/opt/cmtools/autoconf-2.69/bin:$PATH
gmake
gmake install
gmake clean
bzip2 -dc pcre-8.33.tar.bz2 | tar xf -
cd pcre-8.33/
./configure --disable-cpp CFLAGS="-g -O3" CC="gcc -m64" --prefix=/usr/local/pcre
gmake
gmake install
gmake clean
gzip -dc openssl-1.0.1e.tar.gz | tar xf -
cd openssl-1.0.1e
./config --prefix=/usr/local/ssl shared -m32
gmake
gmake install
gmake clean
bzip2 -dc binutils-2.23.2.tar.bz2.tar.bz2.tar.bz2 | tar xf -
cd binutils-2.23.2
./configure --prefix=/opt/cmtools/binutils-2.23.2
gmake
gmake install
gmake clean
cd httpd-2.4.6
./configure --prefix=/usr/local/apache2 \
--enable-mods-shared=all \
--enable-proxy \
--enable-proxy-connect \
--enable-proxy-ftp \
--enable-proxy-http \
--enable-ssl=shared \
--enable-ssl \
--with-ssl=/usr/local/ssl \
--with-mpm=prefork --with-pcre=/usr/local/pcre \
-with-included-apr
gmake
gmake install
gmake clean
The main error that I encountered when tried with different compile flags are:
ld: fatal: file /usr/local/lib/libpcre.so: wrong ELF class: ELFCLASS64
ld: fatal: File processing errors. No output written to .libs/httpd
collect2: ld returned 1 exit status
gmake[1]: *** [httpd] Error 1
gmake[1]: Leaving directory `/opt/cmtools/soft/httpd-2.4.6'
gmake: *** [all-recursive] Error 1
ld: fatal: file /usr/local/ssl/lib/libssl.so: wrong ELF class: ELFCLASS32
ld: fatal: file /usr/local/ssl/lib/libcrypto.so: wrong ELF class: ELFCLASS32
ld: fatal: File processing errors. No output written to .libs/ab
collect2: ld returned 1 exit status
gmake[2]: *** [ab] Error 1
gmake[2]: Leaving directory `/opt/cmtools/soft/httpd-2.4.6/support'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/opt/cmtools/soft/httpd-2.4.6/support'
gmake: *** [all-recursive] Error 1
Undefined first referenced
symbol in file
TLSv1_2_client_method ab.o
TLSv1_1_client_method ab.o
BIO_set_callback ab.o
BIO_set_callback_arg ab.o
BIO_get_callback_arg ab.o
SSL_CTX_set_info_callback ab.o
ld: fatal: Symbol referencing errors. No output written to .libs/ab
collect2: ld returned 1 exit status
gmake[2]: *** [ab] Error 1
gmake[2]: Leaving directory `/opt/cmtools/soft/httpd-2.4.6/support'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/opt/cmtools/soft/httpd-2.4.6/support'
gmake: *** [all-recursive] Error 1
Here is the system info:
bash-3.00# uname -a
SunOS hegel 5.10 Generic_142909-17 sun4v sparc SUNW,SPARC-Enterprise-T5120
bash-3.00# cat /etc/release
Oracle Solaris 10 9/10 s10s_u9wos_14a SPARC
Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
Assembled 11 August 2010
bash-3.00# isainfo -b
64
Appreciated for any thread for this.
Thanks.
You're building PCRE as a 64-bit library ("-m64"), but trying to build OpenSSL as a 32-bit library ("-m32") and link against that PCRE. That won't work.
Try building OpenSSL as 64-bit.
You may find that you need to edit the OpenSSL "Configure" file to adjust the compiler flags used for your hardware and compiler combination. For instance, if building on Solaris x86 using the Sun Studio compiler, the Configure script includes the "-fast" compiler flag. I found out the hard way that this hurts you when you build on a box with an AMD processor, but plan to use the code on boxes with Intel processors: the "-fast" flag enables all applicable optimizations for your compile box, including things like AMD 3DNow! extensions. Better to edit the Configure file before running it, and substitute "-fast" with architecture optimizations that are sensible for your lowest-common-denominator Intel systems in that case. OpenSSL uses an unusual Configure script that ignores the usual environment variables like CFLAGS, so editing Configure is occasionally necessary.
Also, don't be tempted to do a parallel make ("gmake -j n") with OpenSSL. The Makefile generated by OpenSSL's Configure isn't parallel-safe, and it won't build.
FreeType build system -- automatic system detection
The following settings are used:
platform unix
compiler xcrun clang
configuration directory ./builds/unix
configuration rules ./builds/unix/unix.mk
If this does not correspond to your system or settings please remove the file
`config.mk' from this directory then read the INSTALL file for help.
Otherwise, simply type `/Applications/Xcode.app/Contents/Developer/usr/bin/make' again to build the library,
or `/Applications/Xcode.app/Contents/Developer/usr/bin/make refdoc' to build the API reference (the latter needs python).
cd builds/unix; /bin/sh ./configure '--without-png' '--prefix=/Users/itux/Developer/GIT/ios/ImportedSources/vlc/contrib/arm-apple-darwin11-armv7' '--build=i686-apple-darwin10' '--host=arm-apple-darwin11' '--target=arm-apple-darwin11' '--program-prefix=' '--enable-static' '--disable-shared' '--disable-dependency-tracking' '--with-pic'
configure: WARNING: unrecognized options: --disable-dependency-tracking
checking build system type... i686-apple-darwin10
checking host system type... arm-apple-darwin11
checking for arm-apple-darwin11-gcc... xcrun clang
checking whether the C compiler works... no
configure: error: in `/Users/itux/Developer/GIT/ios/ImportedSources/vlc/contrib/iPhoneOS-armv7/freetype/builds/unix':
configure: error: C compiler cannot create executables
See `config.log' for more details
make[1]: *** [setup] Error 77
make: *** [.freetype2] Error 2
I try build freetype2 as description here:
VLC Compiling Error