This is a very simple question, but I have struggled for two days to start up my WebObjects on a deployment Debian server. Everything has worked fine so far with Eclipse and Direct Connect, and an apachectl -M shows that the webobjects module (http server) is installed, running and shared. But when I try to run something as simple as a Hello World the browser returns a 404.
My applications are in /usr/share/webobjects/Library/WebObjects/JavaApplications/
Any pointers as to how I should configure (symbolic links and .conf entries) to make this work?
Much appreciated.
Luis
Have you had a look at the Deploying on Linux page on the WOCommunity wiki? If that doesn't help, you may need to post the relevant sections of your httpd.conf here for inspection.
Related
Hi so basically what I am trying to do is get my spring web-application to run on port 80. I have installed tomcat8 and apache on a Ubuntu server and everything is running smoothly on myDomainName.com:8080, I have tried installing Authbind to help but it says I must set AUTHBIND=yes in the file location /etc/default/tomcat but for some reason this file is not present.
I have read previously that this file is not created if the installation was done from extracting the target file, this was my approach and this seems to me why the file is not there, I have no other solution.
Is there another way to set this authbind to yes or will I have to use Ip tables, or forward requests from Apache to tomcat. if i cant set authbind what in your opinion is the best solution.
Sorry if I left anything out, any help/suggestions would be of great help.
Thanks!
I would just completely reinstall the Tomcat on to your system. I had a similar problem and this was the only solution for me.
I am running WordPress on a CentOS server with Apache and Mysql and it was running smoothly a couple of days ago but when I am trying to install any plugin or update WordPress, it gives the error with the exact statement "Unable to locate WordPress root directory".
Any suggestions are welcome because I need to install a few plugins.
This error can be caused by the wrong FTP username being given (not an incorrect password – that would be trapped nicely by wordpress – but the username).
I guess this isn’t something that is going to happen often – moving a server and so changing the FTP username – but I’m glad I thought to read around before spending hours diagnosing the server.
This could be because of the web host you are using. If you are hosting it on a free web host it could be somewhat unstable. If you really want to test wordpress out to see how it would word if it did word correctly, try using WAMP.
http://www.wampserver.com/en/
I want to test some code on localhost before uploading to a live site. So I decided to install Apache. I'm running 64bit windows 7 enterprise edition. I downloaded httpd-2.0.64-win32-x86-no_ssl.msi. I installed it under C:\Program Files (x86)\Apache Group\Apache2
I have set domain name and server name to localhost in my installation, and used default value for all other steps. In my configuration file httpd.conf, I have ServerName localhost:80.
I followed everything I can find on online apache installation tutorials. But when I typed in localhost in my browser, I got a 404 error :(
I know it's very hard to diagnose this way, but I just wonder if someone can spot an important step I'm missing.
I'm feeling it could be something to do with my 64bit machine, and the long folder name Program Files (x86). But I have tried to install on C:\Apache directly and failed too (even got an error during installation). Can someone help?
Finally figured it out. Apache service didn't start because another system process was listening to port 80. Refer to these two posts for solutions:
http://forums.zpanelcp.com/archive/index.php/t-5265.html
http://www.softaculous.com/board/index.php?tid=1575&title=Apache_won%27t_start
Good luck to all!
Did you start the service?
Also, you should install XAMPP or WAMPP, which offers Apache, PHP and MySQL support without all the configuration hassle.
If you got a 404 error then either the webserver is running or you failed to start it and have something very wrong with the existing network config on your machine.
The latter is a lot more likely - and you can check this by looking at the logs which it has generated - there should be entries in both the access and error log.
If the problem is the spaces in the path (you'll see an error relating to the documentroot from the entries added to the error_log at startup) then (IIRC) you can either enclose the path in double quotes or use a path for the document root which doesn't have spaces - the content doesn't have to site below the directory you installed Apache into - indeed it's arguable that using a different path is good practice. Note that several versions of mod_fcgid don't like paths with spaces even if you quote them.
I recently installed Apache and enabled "localhost" with Windows. When I type "localhost" in my browser, it brings me to a page explaining that the Apache installation was successful. I just don't know where to find this. Is it reading some index.html file? If so, I just can't find it.
I tried going to C:\inetpub\wwwroot but the "localhost" in the browser is not reading it from this location. Where else is it reading localhost from? I use Windows 7.
This is usually found in \apache\htdocs on a Windows default install. The 'Pre-Installation' steps covered in this Apache, PHP and MySQL setup guide might be helpful.
If you use a default install of WampServer, it will be in C:\wamp\www
So I have managed it. I can clone mercurial-repositories remotely using HTTP to my Windows Server 2003 machine and the ipaddress from that machine. Although I did deactivate IIS6 and am using Apache 2.2.x now. But not all works right now...darn! Here's the thing:
Cloning goes smooth! But when I want to push my changes to the original repository I get the message "cannot lock static http-repository". On the internet I get to read several explanations that Mercurial wasn't designed to push over HTTP connections. Still, on the Mercurial website there's something about configuring an hgrc file.
There's also the possibilty to configure Apache to host via HTTPS (or SSL). For this you have to load the module enabling OpenSSL and generating keys.
Configuring the hgrc file
Just add "push_ssl = false" under the [web] line. But where to put this file when pushing your changes back?! Because I placed it in the root of the server, in the ".hg" directory, nothing works.
Using SSL/HTTPS with Apache
When I try to access 'https://myipaddress' it fails, displaying a dutch message which would mean something like "server taking too long to respond". Trying to push also gives me a dutch error message which means about the same. It can not connect to my server via https although I followed the steps exactly at this blog.
I don't care which of the above solutions will work for me. Turns out none of them work so far. So please, can anyone help me with one of the solutions above? Pick the easiest! Help will be greatly appreciated, not only from me.
Summary
-Windows Server 2003
-Apache 2.2 with OpenSSL
-Mercurial 1.8.2
-I can clone, but not push!
Thank you!
Maarten Baar(s)
It seems like you might have apache configured incorrectly for getting it to do what you want. Based on your question it sounds like you have a path (maybe the root of the server) pointing to the repository you want to serve.
Mercurial comes with a script for this exact purpose, in the latest version it is hgweb.cgi. There are reasonably good instructions for setting it up on the mercurial site. It should allow both cloning and pushing. You will need the push_ssl=false if you will not be configuring https and also an allow_push line which will let certain users, or all (*) push to the repository. But all that should be part of the setup docs.