I have some text field page items on my APEX 5.0 page and I want to make the textboxes as read only/non-editable. During the page load I want to use these text boxes for only the data display on the page and should be non-editable.
Can somebody advice on how to do that? What attributes need to set for this?
This answer is a bit late to the party, but I found myself confronted to this problem and I wanted to share the solution I came up with.
In fact you just need to create your item as a text area, let say P1_Text_Area and you give it a readonly attribute using JavaScript. Write thoses 2 lines in the "Function and Global Variable Declaration" of your page:
var disItem = document.getElementById('P1_Text_Area');
disItem.readOnly = true;
Hope this helps someone in need.
in item properties find the
Read Only group
and set Read Only Condition Type as Always
or the option that suits to you
You can use disabled + save session state ==> read only
Related
Hi guys ,
I'm currently working on a Drupal project which use the Panelizer module by overriding the default node display. The panel for this content type is made width a lot of rules and specifications in order to display some specific content (like views) according some fields.
Now I need to print in PDF the same content that is displayed by the panelizer module but in another display (in one column ), so I cloned the display I use and rearranged it to display what I want.Then I want to use this display width the print module but I didn't managed to do that.
Any idea how can I do that ?
I just can't use the default node render, because I would miss some informations dues to the specifications used in the panel, and I can't print the panelized content because it's not the same display.
I read this thread but how can I say to the print module to use the "print" display I cloned instead of the default one ?
Any suggestions or ideas will be appreciated or if you have another idea for doing that you're welcome :)
Thank you !
In your print pdf template you can load the node then create a view with the display and finally render it : drupal_render(node_view(node_load($node->nid), "name of your display")) ;
Another way is to alter node entity info, telling that 'print' view can be panelized, i.e.
/**
* Implements hook_entity_info_alter().
*/
function mymodule_entity_info_alter(&$entity_info) {
$entity_info['node']['view modes']['print']['custom settings'] = TRUE;
...
}
After that, you go to panelizer settings of your content type(s), and set whatever you want for the print view mode
I'm trying to check if a value is contained in the innertext of a webelement but I'm having a little problem: frames seem to change at every refresh of the pages.
These are the steps I've recorded:
Browser("SystemPage").Page("SystemP").Frame("dme2_header").Image("Gestione Anagrafiche").Click<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_appl").WebEdit("pdrBean.pdrPod").Set parameter("POD")<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_appl").WebButton("Cerca").Click
Browser("SystemPage").Page("SystemP").Frame("dme2_appl_2").Image("show_files").Click
Browser("SystemPage").Page("SystemP").Frame("dme2_appl_6").Image("Lente").Click
cctype = Browser("SystemPage").Page("SystemP").Frame("dme2_appl_7").WebElement("arrow_down").GetROProperty("innertext")<br>
DataAct = Browser("SystemPage").Page("SystemP").Frame("dme2_appl_7").WebElement("arrow_down_2").GetROProperty("innertext")<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_header").Image("Gestione Anagrafiche").Click
The frames "dme2_appl6" and "dme2_appl7" changes at every refresh of the two pages.
The question is simple: how can I rewrite these two actions to make them universal?
I've tried to do something like:
Set objFrame = Frame("title:=dme2_appl_.")
and then
Browser("SystemPage").Page("SystemP").objFrame.Image("Lente").Click
But QTP gives me an error in return: "property or method not supported by the object"
Please try using the below code
Browser("SystemPage").Page("SystemP").Image("Lente").Click
Avoid using the "Frame" and if you really want to use it, put regex for name property of Frame.
Go to Object Properties--> Click on the Frame object --> Mandatory Properties--> Change name property as
like iFrame_213123123 to i.*
Hope this will solve your problem.
I don't think you can use a frame object that way. When you write Page().Frame() UFT sets the frame's parent in different way than if you first create the Frame.
Think of Frame() as a function that behaves differently when called on a Page or as a free function.
Try:
Browser("SystemPage").Page("SystemP").Frame("title:=dme2_appl_.")
I need to build a dojo value picker that has the following capabilities:
1) Be able to choose views from a different DB
2) Be able to choose multiple values
3) Be able to have the user search for a value
I cannot figure out how to get all three.
A simple value picker appears to not support search.
If I user a dominoViewValuePicker, I cannot have both dojo types:
extlib.dijit.PickerCheckbox
and
extlib dijit pickerlistsearch
Can someone tell me what I am doing wrong?
Thanks to Paul and others for helping. I did get this to work by using the dominoViewValuePicker. See my example below, which I hope could help someone else.
<xe:valuePicker id="valuePicker1"
dialogTitle="Choose From This List" pickerIcon="/picker.png"
for="Approvers" dojoType="extlib.dijit.PickerListSearch">
<xe:this.dataProvider>
<xe:dominoViewValuePicker viewName="(YOURVIEWNAME)">
<xe:this.databaseName><![CDATA[#{javascript:var serv:String = session.getCurrentDatabase().getServer();
serv + "!!" + "YOURDB.nsf";}]]></xe:this.databaseName>
</xe:dominoViewValuePicker>
</xe:this.dataProvider>
</xe:valuePicker>
I don't think you can have both dojo types. But with extlib.dijit.pickerlistsearch, double-clicking selects entries and does allow multiple to be selected. See http://www.intec.co.uk/extension-library-value-picker-and-extlib-dijit-pickerlistsearch/
Goal:
Display the result without using any line between column and row
Problem:
I can't remove these line
The picture below is taken in preview mode
// Fullmetalboy
In the textbox properties for each cell of the grid, just make sure you set the BorderWidth property to 0.
Due to very limited info in the question maybe try Results-to-text instead of Results-to-grid?
I think that we need more info here... are you showing these results in a HTML page, through some dynamic language (ASP, PHP, Ruby)? or are you using reporting tools like Crystal Dynamics?
If you're doing in HTML, I guess the css rule border-collapse:collapse on the table would do the trick
I'm using Dojo 1.5 (including dojox). I have a dojox.grid.DataGrid where each row represents a user. When I click a row, I want to redirect to a URL like /users/USER_ID. The user ID is one of the fields in the grid, so all I need to do in my onRowClick callback is to grab the user ID for the row that was clicked.
The click event contains a rowIndex property, and, indeed, I found a (rather old) post elsewhere that suggested I should be able to do:
var row = dijit.byId('grid').model.getRow(e.rowIndex);
/* (Then grab the 0th field of the row, which is the user ID.) */
(Sorry, I've since lost the URL.)
But my grid object has no model attribute. What's up with that? Has the API changed? (My grid certainly is populated with data, which I can see, click, sort by column, et cetera).
So I'm stuck for now. Note, BTW, that it won't work to use rowIndex to directly access the grid's underlying dojo.data.ItemFileReadStore. That's because the grid is sortable, so there's no guarantee that the grid's rows will be in the same order as the store's.
Any hints would be deeply appreciated. I hope that the question is clear, and sufficiently general that any answers can help others in my predicament. Many thanks.
I have a similar scenario and I grab the value like this:
onRowClick: function(e) {
open_link(my_grid._getItemAttr(e.rowIndex, 'object_path'));
}
In this case my_grid is a reference to the datagrid and object_path is the column where I store the path to the object. open_link is of course a custom function of mine that as it implies, requests a server path.
So just change the specifics to suite your case and you should be fine.