Installing cmake with home-brew - cmake

I'm new to programming. Can you please help me install cmake? I typed brew install cmake. What should I do next?

Typing brew install cmake as you did installs cmake. Now you can type cmake and use it.
If typing cmake doesn’t work make sure /usr/local/bin is your PATH. You can see it with echo $PATH. If you don’t see /usr/local/bin in it add the following to your ~/.bashrc:
export PATH="/usr/local/bin:$PATH"
Then reload your shell session and try again.
(all the above assumes Homebrew is installed in its default location, /usr/local. If not you’ll have to replace /usr/local with $(brew --prefix) in the export line)

Download the latest CMake Mac binary distribution here: https://cmake.org/download/
(current latest is: https://cmake.org/files/v3.17/cmake-3.17.1-Darwin-x86_64.dmg)
Double click the downloaded .dmg file to install it. In the window that pops up, drag the CMake icon into the Application folder.
Add this line to your .bashrc file: PATH="/Applications/CMake.app/Contents/bin":"$PATH"
Reload your .bashrc file: source ~/.bashrc
Verify the latest cmake version is installed: cmake --version
You can launch the CMake GUI by clicking on LaunchPad and typing cmake. Click on the CMake icon that appears.

On MacBooks with M1 processor:
Install:
arch -arm64 brew install cmake
Upgrade:
arch -arm64 brew upgrade cmake

Related

cmake installation on aix installed but command not found

i installed cmake on my AIX 7.2
bash-3.2# yum install cmake
Setting up Install Process
Package cmake-3.16.0-2.ppc already installed and latest version
Nothing to do
bash-3.2#
but running it .
bash-3.2$ cmake
bash: cmake: command not found
there is also no folder for cmake in /opt/bin directory
The RPM's on AIX likely install software to /opt/freeware so you probably need /opt/freeware/bin in your PATH to casually use "cmake" on the command line.
You can verify the paths installed by a package with e.g.
rpm -ql cmake|grep bin/

How to install cmake-gui latest version on Ubuntu

When installing from package-manager, cmake-gui or cmake-qt-gui are shipped with an older version of cmake.
Even after I build and install cmake's latest version from source, cmake-gui continues to use the older version.
How to force cmake-gui to use cmake latest version builded from source?
The cmake-gui package from repository has a built-in cmake, those two have the same version.
Steps to install cmake-gui latest version.
Install checkinstall to easily remove cmake in the future: sudo apt-get install checkinstall;
Download latest cmake from official site;
Extract the compressed file to some folder;
Open a terminal inside that folder;
Execute: ./bootstrap --qt-gui;
Execute: checkinstall -D make install; You will be prompted with some questions, answer them;
Finished installation! Type cmake at Ubuntu's search bar and you will see a CMake icon;
Verify the version clicking at help >> about;
An alternative to the above.
Check if you have an old version of cmake with cmake --version. If so, remove it with sudo apt-get purge cmake
Download latest cmake from official site
Extract the downloaded cmake-x.xx.x file to your Desktop and then open a terminal inside that file.
Execute: ./bootstrap --qt-gui
After finished, run gmake as prompted.
Move cmake-x.xx.x file to /opt/ directory by going up to your Desktop with the terminal and then running sudo mv cmake-x.xx.x /opt/
Declare cmake binary as global by writing export PATH=/opt/cmake-x.xx.x/bin:$PATH in your ~.bashrc file.
Source with source .bashrc
You will then be able to open cmake or cmake-gui with your terminal from any path in your computer.

ccmake using cmake version 3.10

I am trying to install the new ITK version which needs a cmake version higher than 3.9
I have just download the cmake 3.10 version.
and when I install it there is no ccmake in the bin folder. usually the new ccmake version is here.
when I want to install ccmake using apt it links it to the 3.5 cmake version.
How can I do to have a ccmake version linked to the 3.10 version of cmake ?
Turning my comment into an answer
You can use the following tutorial to build and install the latest CMake version: How do I install the latest version of cmake from the command line?
But - as for the time of your question - it was lacking the hint to install the curses library/headers first (see here,
you don't get ccmake built and installed without it ). So I had the same problem on my Ubuntu and was able to install and rebuild it with the following steps:
# sudo apt-get install libncurses-dev
# cd ~/temp/cmake-3.10.2
# cmake .
...
# make -j8
...
# sudo make install
...
# ccmake
Usage
ccmake <path-to-source>
ccmake <path-to-existing-build>
Specify a source directory to (re-)generate a build system for it in the
current working directory. Specify an existing build directory to
re-generate its build system.
Run 'ccmake --help' for more information.
The binary ccmake is a target of the make file.
To get all, perform:
./configure
make all
sudo make install
To just get ccmake, perform:
make ccmake

installation of cmake on debian 8

I tried to install mcsema on my debian linux but I am stopped by error
Cmake 3.1 or higher is required. You are running 3.0.2. On debian this is the only version could be installed by apt-get install. Building CMake from sources, I get several errors as well. Does anyone know how to install the latest version of Cmake on Debian 8?
Download latests cmake release and follow the README.rst instructions:
UNIX/Mac OSX/MinGW/MSYS/Cygwin ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You need to have a compiler and a make installed. Run the
bootstrap script you find in the source directory of CMake. You
can use the --help option to see the supported options. You may
use the --prefix=<install_prefix> option to specify a custom
installation directory for CMake. You can run the bootstrap script
from within the CMake source directory or any other build directory of
your choice. Once this has finished successfully, run make and
make install. In summary::
$ ./bootstrap && make && make install

How to install OCLint in mac os x

I'm trying to install OCLint in my mac with MAC OS X mavericks
Its documentation here says that
*Following code snippet is an example for the .bashrc or .bash_profile file that is sourced when terminal launches.*
OCLINT_HOME=/path/to/oclint-release
export PATH=$OCLINT_HOME/bin:$PATH
How can I accomplish this? whether I need to create .bashrc or .bash_profile file, or add to existing file. Where can I locate .bashrc or .bash_profile file
Install Oclint with Homebrew is quickly and helpful solution.
Open terminal and install homebrew first:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Install Oclint 0.11.1 with this command
brew install https://gist.github.com/TonyAnhTran/e1522b93853c5a456b74/raw/2f440240fe99634771a3f2353c0c53a43c2d0fb2/oclint.rb
To create .bash_profile in terminal:
Type "cd ~/" to go to your home folder
Type "touch .bash_profile" to create your new file.
Edit .bash_profile with your favorite editor (or you can just type "open -e .bash_profile" to open it in TextEdit.
Type ". .bash_profile" to reload .bash_profile and update any functions you add.
Update on 31-Jul-2017:
before_install:
brew cask uninstall oclint
brew tap oclint/formulae
brew install oclint
brew tap oclint/formulae
brew install oclint
More details are here: https://github.com/oclint/homebrew-formulae
If you have a .bashrc in your home directory (i.e. /Users/yourname/.bashrc) already then just append these lines, otherwise create a new .bashrc containing these two lines. Then do this:
$ source ~/.bashrc
Those files should be in your home directory, but they will be hidden by default due to the leading dot. You can enable the "Show all files" feature to see them in Finder. Or, if you're comfortable using the Terminal app, edit the files from the terminal and append the lines for OCLint.