I'm trying to get a count of all speakers who are active regarding that item as well as the total of speakers who correlate to a certain item. The first LEFT JOIN for the total speakers works, but the other for ONLY the active speakers regarding that item doesn't, any help is appreciated. The SQLFiddle is here
http://sqlfiddle.com/#!3/b579d/1
But when I try to add in the portion where you would get the number of active speakers
(LEFT JOIN (SELECT COUNT (tbl_SpeakerCard_Log.SpeakerName)
WHERE tbl_Speaker_Log.Spoken = 0)
ON tbl_AgendaList.AID = tbl_SpeakerCard_Log.AID)
under the previous LEFT JOIN I get an error. I'm 100% sure the query is wrong in some form, but I'm not sure how to approach it.
*NOTE: Spoken/Active are interchangeable, I just use different wording to clarify what I'm looking for.
EDIT: This is the desired output
http://imgur.com/yP1FKxg
You can use conditional aggregation to do this:
SELECT
AgendaList.AID,
AgendaList.Item,
COUNT(SpeakerList.SPID) as SpeakerTotal,
SUM(CASE WHEN SpeakerList.Spoken = 0 THEN 1 ELSE 0 END) as ActiveSpeakers
FROM AgendaList
LEFT JOIN SpeakerLIST ON AgendaList.AID = SpeakerList.AID
GROUP BY AgendaList.AID, AgendaList.Item;
Sample SQL Fiddle
Or you could use count instead of sum (which might be clearer):
COUNT(CASE WHEN Spoken = 0 THEN Spoken END) as ActiveSpeakers
SQL FIDDLE
WITH sTotal AS (
SELECT AgendaList.AID, AgendaList.Item, COUNT( SpeakerList.SPID) as SpeakerTotal
FROM AgendaList
LEFT JOIN SpeakerLIST ON AgendaList.AID = SpeakerList.AID
GROUP BY AgendaList.AID, AgendaList.Item
),
sActive AS (
SELECT AgendaList.AID, AgendaList.Item, COUNT( SpeakerList.SPID) as SpeakerActive
FROM AgendaList
LEFT JOIN SpeakerLIST ON AgendaList.AID = SpeakerList.AID
WHERE SpeakerLIST.Spoken = 0
GROUP BY AgendaList.AID, AgendaList.Item
)
SELECT sTotal.*, sActive.SpeakerActive
FROM sTotal left join
sActive on sTotal.AID = sActive.AID
Related
I'm trying to count incident types per depot. My current query returns the following result set:
I then apply a count query on this set which looks like this:
select middleList.DepotName as depot,
count(middleList.NearMiss) as NearMiss,
count(middleList.Theft) as Theft,
count(middleList.Security) as Security,
count(middleList.LostTimeDisablingInjury) as LostTimeDisablingInjury,
count(middleList.Fire) as Fire,
count(middleList.OccupationalIllness) as OccupationalIllness,
count(middleList.VehicleAccident) as LostTimeDisablingInjury,
count(middleList.Spliiage) as Fire,
count(middleList.PropertyDamage) as OccupationalIllness,
count(middleList.NonConformance) as NonConformance,
count(middleList.Other) as Other
from
(SELECT dbo.IncidentTypes.NearMiss, dbo.IncidentTypes.Theft,
dbo.IncidentTypes.Security, dbo.IncidentTypes.LostTimeDisablingInjury,
dbo.IncidentTypes.Fire, dbo.IncidentTypes.OccupationalIllness,
dbo.IncidentTypes.VehicleAccident, dbo.IncidentTypes.Spliiage,
dbo.IncidentTypes.PropertyDamage, dbo.IncidentTypes.NonConformance,
dbo.IncidentTypes.Other, dbo.Incidents.IncidentTitle, dbo.Depots.DepotName,
dbo.Incidents.IncidentNumber
FROM dbo.Departments INNER JOIN
dbo.Depots ON dbo.Departments.DepotId = dbo.Depots.DepotId
INNER JOIN
dbo.Employees ON dbo.Departments.DepartmentId =
dbo.Employees.DepartmentId INNER JOIN
dbo.IncidentTypes INNER JOIN
dbo.Incidents ON dbo.IncidentTypes.IncidentTypeId =
dbo.Incidents.IncidentTypeId ON dbo.Employees.EmployeeId =
dbo.Incidents.EmployeeId_EmployeeInvolv
Where Incidents.DateCreated = (SELECT MAX (i2.DateCreated) FROM
Incidents as i2 WHERE Incidents.IncidentNumber = i2.IncidentNumber)) as
middleList
group by middleList.DepotName
Which return the following incorrect results:
Please help.
Okay so I found the problem.
It seems like the rows are being counted and not the actual values, thus adding this to the count insured that they were being counted properly:
count(case when middleList.NearMiss <> '0' then 0 end ) as NearMiss
End result being:
I face a problem with the result on my script.
My formula for MARGIN is ((plnamt-(ibhexc/ibhand))/plnamt)*100.
I want to display only result > 2. How to do this? Please help.
This my script:
select
a.plnitm,a.plnstr,max(a.plncdt),max(a.plnndt),max(a.plnamt),max(a.plnevt),b.idept,c.ibhand,c.ibhexc,
decimal((c.ibhexc/c.ibhand),12,4) as AVG_COST,
decimal(((((max(a.plnamt)-(c.ibhexc/c.ibhand))/(max(a.plnamt))))*100),12,4) as MARGIN
from prcpln a
inner join invmst b on a.plnitm = b.inumbr
inner join invbal c on a.plnitm = c.inumbr and a.plnstr = c.istore and c.ibhand <> 0
where a.plnstr = ''14006''
group by a.plnitm,a.plnstr,b.idept,c.ibhand,c.ibhexc
order by a.plnitm
Simplistically, for situations like this, you can take your query and put it inside a cte:
WITH q AS (
select
a.plnitm,a.plnstr,max(a.plncdt),max(a.plnndt),max(a.plnamt),max(a.plnevt),b.idept,c.ibhand,c.ibhexc,
decimal((c.ibhexc/c.ibhand),12,4) as AVG_COST,
decimal(((((max(a.plnamt)-(c.ibhexc/c.ibhand))/(max(a.plnamt))))*100),12,4) as MARGIN
from prcpln a
inner join invmst b on a.plnitm = b.inumbr
inner join invbal c on a.plnitm = c.inumbr and a.plnstr = c.istore and c.ibhand <> 0
where a.plnstr = ''14006''
group by a.plnitm,a.plnstr,b.idept,c.ibhand,c.ibhexc
)
SELECT * FROM q WHERE margin > 2
ORDER BY q.plnitm
This is similar to the advice to use HAVING - a HAVING is a "where clause that is done after a GROUP BY"
A cte is a way of taking some calculated block of data and giving it an alias that can be used just like a table. I wanted to answer this way to point out to you that queries don't have to be formed purely from tables; tables are just blocks of data (with a name), and the output from a select is also "just a block of data" that can be given a name (by use of a cte or subquery) and then used just like a table is
Elon Reeve Musk FRS is an entrepreneur and business magnate. He is the founder, CEO, and Chief Engineer at SpaceX; early-stage investor, CEO, and Product Architect of Tesla, Inc.; founder of The Boring Company; and co-founder of Neuralink and OpenAI.
Your inner select returns a table. That can't be used as parameter to match a WHERE IN condition. Instead try using an INNER JOIN
sum(decode(
select sum(dou.noukn)
from dou
join v_kzeiritsu on
dou.zeiritsu = v_kzeiritsu.zeiritsu
)) as noukn2;
Just move your sum logic inside select as follows:
(SELECT SUM(DOU$2.NOUKN)
FROM SDNISHI.V_KZEIRITSU V
WHERE DOU$2.ZEIRITSU = V.ZEIRITSU) AS NOUKN2
In case If it gives aggregation error then use sum(above query) AS NOUKN2
Your code is very strange. For instance, it seems to assume that V_KZEIRITSU has one row. But, you can move this to the FROM clause:
SELECT SUM(CASE WHEN DOU.ZEIRITSU = K.ZEIRITSU THEN DOU.NOUKN ELSE 0 END) AS NOUKN2
FROM DOU LEFT JOIN
V_KZEIRITSU K
ON 1=1 -- in case the table is really empty
A slightly more reasonable version would be:
SELECT SUM(DOU.NOUKN) AS NOUKN2
FROM DOU LEFT JOIN
V_KZEIRITSU K
ON DOU.ZEIRITSU = K.ZEIRITSU -- in case the table is really empty
It seems rather unlikely to me that this is what you really intend. If not, I would suggest that you ask a new question with appropriate same data, desired results, and explanation of the results. A non-working query should not be expected to provide the same level of information.
I'd say that it is, actually, as simple as
select sum(dou.noukn)
from dou
where dou.zeiritsu in (select zeiritsu from v_kzeiritsu)
(I'm not sure what dou is (table? alias?), but I hope you do.)
After you edited the question, I'm editing the answer. I marked with "--> this" two lines that - in my opinion - might help. As previously, the whole sum(case ...) as noukn2 is replaced by a simple sum(dou$2.noukn).
Note that - in Oracle - you can't use as keyword for table alias. For example:
no: from employees as e
yes: from employees e
Here's your query:
SELECT DOU$2.CUSTCD AS CUSTCD,
DOU$2.CHUNO AS CHUNO,
DOU$2.LINNO AS LINNO,
DOU$2.SHIPDAYYM AS SHIPDAYYM,
SUM (DOU$2.NOUKN) AS NOUKN,
SUM (DOU$2.ZEIKN) AS ZEIKN,
SUM (dou$2.noukn) AS noukn2 --> this
FROM SDNISHI.T_HCHUMON_DOUSOU DOU$2
INNER JOIN SDNISHI.SY_KANRI KNR ON KNR.SHIPDAYYM = DOU$2.SHIPDAYYM
INNER JOIN SDNISHI.T_HCHUMON_MEI MEI
ON MEI.CUSTCD = DOU$2.CUSTCD
AND MEI.CHUNO = DOU$2.CHUNO
AND MEI.LINNO = DOU$2.LINNO
AND MEI.SHIPDAYYM = DOU$2.SHIPDAYYM
AND MEI.USEDNGKBN = '0'
AND MEI.CANCELKBN = '0'
LEFT OUTER JOIN SDNISHI.T_HCHUMON_HD HD
ON HD.CUSTCD = MEI.CUSTCD
AND HD.CHUNO = MEI.CHUNO
AND HD.LINNO = MEI.LINNO
AND HD.USEDNGKBN = '0'
AND HD.CANCELKBN = '0'
AND isnull (HD.CANKBN, '00') = '00'
JOIN v_keziritsu vk ON vk.zeiritsu = dou$2.zeiritsu --> this
WHERE DOU$2.USEDNGKBN = '0'
AND DOU$2.CANCELKBN = '0'
AND ( ( MEI.CHGDELKBN = '1'
AND MEI.HDOUSOUKBN = '02'
AND ( MEI.CHUSU > 0
OR MEI.BCHUSU > 0))
OR ( MEI.CHGDELKBN != '1'
AND HD.HDOUSOUKBN = '02'
AND ( MEI.CHKBTNFGA = '1'
AND HD.CHUSU > 0)
OR ( MEI.CHKBTNFGB = '1'
AND HD.BCHUSU > 0)))
GROUP BY DOU$2.CUSTCD,
DOU$2.CHUNO,
DOU$2.LINNO,
DOU$2.SHIPDAYYM
I have 4 tables:
Competencies: a list of obviously competencies, static and a library
Competency Levels: refers to an associated group of competencies and has a number of competencies I am testing for
call_competency: a list of all 'calls' that have recorded the specified competency
competency_review_status: proving whether each call_competency was reviewed
Now I am trying to write this query to count a total and spit out the competency, id and whether a user has reached the limit. Everything works except for when I add the user. I am not sure what I am doing wrong, once I limit call competency by user in the where clause, I get a small subset that ONLY exists in call_competency returned when I want the entire list of competencies.
The competencies not reached should be false, ones recorded appropriate number true. A FULL list from the competency table.
I added the derived table, not sure if this is right, obviously it doesn't run properly, not sure what I'm doing wrong and I'm wasting time. Any help much appreciated.
SELECT comp.id, comp.shortname, comp.description,
CASE WHEN sum(CASE WHEN crs.grade = 'Pass' THEN 1 ELSE CASE WHEN crs.grade = 'Fail' THEN -1 ELSE 0 END END) >= comp_l.competency_break_level
THEN TRUE ELSE FALSE END
FROM competencies comp
INNER JOIN competency_levels comp_l ON comp_l.competency_group = comp.competency_group
LEFT OUTER JOIN (
SELECT competency_id
FROM call_competency
WHERE call_competency.user_id IN (
SELECT users.id FROM users WHERE email= _studentemail
)
) call_c ON call_c.competency_id = comp.id
LEFT OUTER JOIN competency_review_status crs ON crs.id = call_competency.review_status_id
GROUP BY comp.id, comp.shortname, comp.description, comp_l.competency_break_level
ORDER BY comp.id;
(Shooting from the hip, no installation to test)
It looks like the below should do the trick. You apparently had some of the joins mixed up, with a column from a relation that was not referenced. Also, the CASE statement in the main query could be much cleaner.
SELECT comp.id, comp.shortname, comp.description,
(sum(CASE WHEN crs.grade = 'Pass' THEN 1 WHEN crs.grade = 'Fail' THEN -1 ELSE 0 END) >= comp_l.competency_break_level) AS reached_limit
FROM competencies comp
JOIN competency_levels comp_l USING (competency_group)
LEFT JOIN (
SELECT competency_id, review_status_id
FROM call_competency
JOIN users ON id = user_id
WHERE email = _studentemail
) call_c ON call_c.competency_id = comp.id
LEFT JOIN competency_review_status crs ON crs.id = call_c.review_status_id
GROUP BY comp.id, comp.shortname, comp.description
ORDER BY comp.id;
I have a query as below which outputs sum only when records of column booklet_type are present. It groups results on types like 'GR' and 'PI'.
For instance, if GR has end_leaf_no and start_leaf_no as '5' and '4' and same for PI then records will be displayed on matching booking_date like,
GR 2
PI 2
But, these does not return any records for 0 occurences of booklets of specific type. I want it as,
GR 0
PI 0
How do I go about accomplishing this result? I tried case when in select clause but to no avail.
Thanks.
Select Booklet_type, SUM(End_Leaf_No - Start_Leaf_No +1) as No_of_Coupons
from Coupon_Sale
where date_format(Booklet_Sale_Date, '%Y%m') = :ccyymm
and Booklet_type = “GR” or “PI”
group by Booklet_Type
You can do this with a left outer join and a subquery that generates the rows you want. The following works in most databases:
Select driver.Booklet_type, SUM(cs.End_Leaf_No - cs.Start_Leaf_No +1) as No_of_Coupons
from (select 'GR' as Booklet_type union all
select 'PI'
) driver left outer join
Coupon_Sale cs
on driver.Booklet_Type = cs.Booklet_Type and
date_format(cs.Booklet_Sale_Date, '%Y%m') = :ccyymm and
cs.Booklet_type in ('GR', 'PI')
group by driver.Booklet_Type;
To make this work, I moved the where conditions into the on clause.