My SQL Server 2012 suddenly stopped working here is all I got in popup message:
could not load file or assembly 'microsoft.visualstudio.shell.ui.internal' or one of its dependencies. An attempt was made to load a program with incorrect format.
I have Repaired using installation CD but no luck.
I had the same problem and fixed by uninstalling the Visual Studio 2010 Shell and installing back. Simply reinstalling doesn't work.
1. Download the Visual Studio 2010 Shell: https://www.microsoft.com/en-us/download/details.aspx?id=1366
2. Run the exe file and click uninstall(or remove).
3. Run the exe file and click install with default settings.
After these steps the Management Studio will work just fine.
I got this error in VS2013 when reparing in the logfille,
[113C:2588][2018-01-20T16:41:54]i000: MUX: ExecuteError: Package (vs_minshellcore) failed: Error Message Id: 1305 ErrorMessage: Error reading from file C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Shell.UI.Internal\v4.0_12.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Shell.UI.Internal.dll. Verify that the file exists and that you can access it.
and I check the file is exist, and I modify its access authority to complete control to every user account, but this error still occur,
Finally I delete this dll, and find same dll in another Normal Computer with VS , and copy the file paste to the problem computer, and run repair again then pass.
Share my works Microsoft.VisualStudio.Shell.UI.Internal.dll in Here.
But in my case after repair success, vs2013 still got error when opening, so I finally give up and turn to use vs2015, which luckly can work. It is a strange problem.
have this problem also with vs2019 community. I was trying to create the first 2019 project after it is installed. Then I got this. I ran the install exe file, vs_community.exe again in order to repaire it. But I found out that the install program request to restart the pc to finish the last step. Actually I restarted the pc afterwards manually. But I still did it by clicking on the button "restart pc". After the pc is restarted, the problem is gong. I can create project without any error.
Related
I have a Blazor server app working with it in Visual Studio 2022 version 17.3.376.3011 and Windows 11. All of a sudden I get these errors: Could not copy from debug to bin because IISEXPRESS.EXE is locking the file.The exact error message is:
Could not copy "obj\Debug\net6.0\xxx.dll" to "bin\Debug\net6.0\xxx.dll".Exceeded retry count of 10. Failed. The file is locked by: "iisexpress.exe (4892)"
I have tried for solutions including:
Closing VS and try to delete obj and bin folders. Doesn't work since
Bin folder can't be deleted because it is locked.
Exit IISExpress in
system tray and then try to delete Bin (doesn't work still locked)
and open VS to rebuild. Same problem.
Kill IISExpress in Task Manager. Won't work because of permission.
Clean solution and rebuild. Same error still.
The only thing that helped is to restart the computor and then it is released and I can continue working.
Is there someone with a fix for this that I'm grateful.
I am trying to install Visual Basic 6 Enterprise Edition on Windows 8 Server (64-bit) , but I got the errors, saying "Setup could not remove the file: C:\Windows\system32\DBNMPNTW.DLL". So, I used "LockHunter" to lock the file and continue, but it does not proceed (see attached). So, I chose "ignore" button to proceed(assumed that the file is the only problem). However, I got the following two files that give me the error, saying "Setup could not remove the file"
(1). C:\Windows\system32\DBNMPNTW.DLL
(2). C:\Program Files(x86)\Common Files\system\oledb\SQLOLEDB.DLL
Setup could not remove the file http://www.dreamincode.net/forums/topic/96146-javasigndll-error/
So, I clicked "ignored" for both errors, and then I got different error type, saying "..was unable to register itself in the system registry."(see attached). See below for the lists of the file names.
So, I copy fresh dll files from online, and try to register all dll files(found on this site), and I got the error below (see pic).
Thanks in advance,
I download visual studio code for mac today. I tried to create a simple asp.net 5 web application following these instructions https://code.visualstudio.com/Docs/ASPnet5
When I open my web application folder in visual studio, it says I need to run a restore command.
I ran the dnu restore command just like the instructions tell me but it seems to always fail.
I receive different errors every time I run it. But most of them are like this one:
CACHE https://www.nuget.org/api/v2/package/System.Threading/4.0.10-beta-22816
SharpCompress.Common.ArchiveException: Could not find Zip file Directory at the end of the file. File may be corrupted.
Restore failed
There is a stack trace as well, but for brevity sake I'll omit it for now
Has anyone experienced this?
Try dnu restore --no-cache.
You may also need to remove previously downloaded files - check ~/.dnx/packages. I removed all files from that folder some time before trying the above. Also, see the comments below, if ~/.dnx/runtimes contains unexpected versions removing them may also work. Note that the current runtime version can be controlled using dnvm.
I never saw the NullReference exception, but I was getting the SharpCompress.Common.ArchiveException. I suspect there was a mismatch from what dnu thought was the cache state with the actual cache state (maybe something timed out the first time or something).
I got this err msg while running my WindowsCE app:
...and so I copied NETCFv35.Messages.EN.wm.cab from my PC to my handheld, and tried to run/install that cab file on the handheld. I got:
So then I tried the same with NETCFv35.Messages.EN.cab. When I ran it on the handheld, it told me that it had already been installed:
...but I went ahead and "reinstalled." I'm not sure its default installation location, though, is the right place:
...so I copied it over again to the folder on the handheld where my .exe resides (NETCFv35.Messages.EN.cab had been deleted out of there after reinstalling). This time I made sure to install it into that same folder, rather than the seemingly random location it chose the first time:
Still, though, running the app shows me the same old "Which way did they go, George?" err msg about not being able to show me error messages (first screamshot above).
This makes me feel kind of Grimm, to the point where I'm thinking this is a pretty revoltin' development (no pun intended).
What do I need to do to be able to see the hidden err msgs?
UPDATE
This is what I got when I unpacked SYCCFA~1.001, renamed it System.SR.dll, and tried to add it as a reference to the project (it claims that it is not a .NET assembly...???):
I tried the same thing with NETCFv35.Messages.EN.wm.cab, with the same results (it looks like the same file - same date, same size...so why the name diff?)
The error messages are in a single file called "System.SR.dll". The CAB simply installs that and puts it into the GAC. You get an "already installed" error because it sees it in the registry, though it doesn't mean the file is actually there.
You can simply extract the DLL from the cab with a zip extractor (I use WinRAR, but whatever). For example, If I open this file:
C:\Program Files (x86)\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE\Diagnostics\NETCFv35.Messages.EN.cab
It has a few things in it. SYCCFA~1.001 is the DLL. Pull it out, rename it to System.SR.dll and add it as a reference in your project. Studio will deploy it when you run and boom, you're cooking with butter.
My local environment VS2012
Using Oracle 10g XE
Dim dbConn As New OleDbConnection
Dim dbComm As OleDbCommand
dbConn.ConnectionString = "Provider=msdaora;Data Source=XE;User ID=scott;Password=tiger"
dbConn.Open()
Tip error: ORA-06413: Connection not open.
Already check the TNSNAMES.ora, SQLNET.ora, LISTENER.ora and its nothing wrong.
But why this error appear?
:(
The error is caused by the parenthesis in the pathname.
possibly you execute VS2012 from C:\program file (x86)...
workaround: create a junction link
steps:
from: command line execute
C:>mkLink /j "Program Files x86" "Program Files (x86)"
and then
fix the (or create a new) shortcut with new path (C:\program file
x86...)
I worked a lot on this problem, I lost a lot of time. Apparently IIS Express in Visual Studio uses the Oracle provider 64 bit.
To solve this problem:
I installed IIS on my PC (Windows 10)
with .NET 4.5 or higher
I compiled the Web API application with 32-bit target.
I publish the web application on my IIS.
On IIS I set enable the apps 32 bit to true
I had the same problem and I resolved the problem installing Oracle 11g Express. Before, I removed all previous Oracle client installation. I use windows 7 64 bit.
Create Bat file to start excel
in bat put path you can adjust to match your folders
start c:\progra~2\micros~1\Office14\Excel.exe
When you start excel just open macro and try :)
I encountered the same problem when working on my Visual studio 2013 project. I was able to run the same project from SVN on a different machine, but it just WON'T work on mine. I checked the connection string and could successfully test the connection in Oracle, but it would throw a disgusting “ORA-06413: Connection not open” error from code.
I got it fixed this way - Install Oracle 11g client -> Select "Administrator" as Type of Installation. Re-open Visual Studio and it worked. Hope it helps!
uninstall your toad or oracle
reinstall on on your window drive ex:(c/d/e) in new folder
don't install in program files (x86)
because program files(x86) is for 32 bit applications
I have resolved the error after the days of searching.
Error Cause:
This error is due to Oracle reserved character "(",")" and in Windows 64 bit there is a folder "Program Files (x86)" which is a creation problem.
Solution:
Create a link folder for "Program Files (x86)" using below command on Window Drive path.
Open cmd as Administrator.
mklink /j "Program Files x86" "Program Files (x86)"
or visit link
download3k article
Open Registry (as Administrator)->Export Registry
Always backup a registry file before changing it. Make a copy of the registry file and work on the copy.
Open Registry file(Copy) in text editor and replace "(x86)" with "x86"
Save the file and import it to your Registry and restart your computer.
Now the "ORA-06413: Connection not open" error goes away.