I have a raspberry pi, with samba configured properly. It's IP address is xx.xx.xx.xx and the proper ports are forwarded. I can access it from my mac by doing open smb://xx.xx.xx.xx but I do not know how to do it from a Windows computer. I have tried \\xx.xx.xx.xx\sharedfolder in a browser and mapping network drive at \\xx.xx.xx.xx\sharedfolder which crashes my computer when using "Map network drive."
I know this is a really stupid question, but I have found no help through google searches, any help is highly appreciated.
You basically open the Start menu, search for run, click enter, and then type in this \xx.xx.xx.xx.
Related
Got this legacy Avocent DSR2035 KVM over IP. Works! Anyone knows how I edit the TCPIP setting on this machine? I have access to the console, it works, but there is no IP settings in any of the menu!
It took some time to figure this out. I had to upgrade firmware first and that was done through the setup port in the back and using a special cable that I built. After the fw update, there were network settings in the standard interface.
So, I have been building this website with HTML and I decided to host it with on Apache2. It runs on an Ubuntu and me already changed the VM assigned Ip, which is 10.2.0.15, into another one. I can access it on the Mac where the VM is, but I asked my friend if he can open it, and he said it was a 404 Server not found error.
Please help!
You probably need to enable port forwarding:
https://www.howtogeek.com/122641/how-to-forward-ports-to-a-virtual-machine-and-use-it-as-a-server/
You haven't indicated what VM software you are using, but the above is for VirtualBox. VMware is a bit different. Also make sure your router is not blocking any packets or any firewall.
as stated in my question. I'm trying to have connection to a virtual machine remotely without enabling virtualbox remote desktop screen. using the network host only. but I could not make this connection without having to enable the option on the screen.
according to my research it is possible because applications as Andy or genymotion does this.
if anyone knows the subject. appreciate your help
How to enable Hyper-V to connect VPN for external internet access in Windows 8?
I'm trying to run Windows phone 8 app using emulator, and while see app in emulator it doesn't connect the VPN to access internet.
Please advice.
Thanks.
MSDN has a troubleshooting page for the Windows Phone 8 emulator. Perhaps you can find related info there. Something like this might help:
Cannot connect to Internet destinations
The Windows Phone 8 Emulator uses the HTTP proxy settings from the host computer. If you can’t access Internet resources from the emulator, check with your IT administrator to make sure that your proxy settings will work with the emulator.
If your network’s proxy servers are unavailable or malfunctioning, it might be possible to restore connectivity for the emulator by disabling automatic proxy detection on the host computer. However this only works in certain network configurations.
To disable automatic proxy detection on the host computer
On the host computer, open Internet Options from the Control Panel. The Internet Properties dialog box opens.
In the Internet Properties dialog box, click the Connections tab.
On the Connections page, click the LAN settings button. The Local Area Network (LAN) Settings dialog box opens.
In the Local Area Network (LAN) Settings dialog box, deselect all the check boxes. Click OK twice to close both dialog boxes.
Restart the emulator and retry the connection.
Also this MSDN blog-post can be helpful: Why can’t the Windows Phone Emulator go online?. Useful part of the article:
As you see, clicking the “>>” on the bar parallel to the Emulator will open a small window with 4 tabs. The last tab is for “Network”. To explain in simpler terms, there are two adapters here – one is for internal use by Emulator and other is for external network connectivity. Each adapter will have an IP address (IPv4) associated with itself. The one of our interest is under Adapter #2.
I have erased out the IPv4 address that is assigned to Adapter #2 (Yellow box), but you find that the IP assigned here starts with 169.254.x.x…., then Bingo! - we have figured out the problem. How?
The IP addresses starting with 169.254.x.x …. Are usually the self-assigned default addresses to a device and not really helpful to get the device to go online. This IP should either be a static IP or the one assigned by the DHCP server (if you have one in the environment) for the device to be able to connect to external networks.
Hope this helps.
I have installed windows phone 8 SDK and tried running a simple app which embeds a WebBrowser on a page. When I try to run the app in emulator the emulator does not get internet connection. It displays an error message saying "You don't have permission to modify internal Hyper-V network adapter settings required to run the emulator". Im sure my login has admin permissions. My machine is 64bit, hyper v is enabled and Hyper v manager is running, hardware virtualization is enabled in the BIOS settings, DHCP is enabled and its connected to a wired network. I have checked all the system requirements. What ever I do it keeps on giving the same error message. I setup everything in a different machine and tried running the app in that machine. The same error message is displayed in the that machine also. Can anyone tell me how to get it working.
DHCP is enabled and its connected to a wired network
Can you run ipconfig /all on your host machine and post it here please?
seems you have problem with your DHCP or maybe multiple DHCP and conflict.
You need to add your user account as a member of the "Hyper-V Administrators" group on the machine.
Detailed steps:
Hit Windows key + Q and search for "local users and groups". Change the search scope to "Settings". Click "Edit local users and groups".
Expand the "Groups" section. Right-click on "Hyper-V Administrators" and select "Add to group".
Add your user account.
Some connection tools on the host can have negative effects when used with the emulator; I found having cisco VPN client installed on the host prevented the emulator from finding the internet. Other VPN clients may have similar side-effects. I simply uninstalled cisco (the inbuilt windows VPN is fine for what I need) and it worked perfectly.
I've also seen problems where it won't find the internet after the host has been suspended / resumed. In that scenario, it turned out to be bad network drivers. I installed a dedicated Intel NIC (rather than the on-board NIC on the motherboard) - problem solved.
Basically, Hyper-V is a bit fussy.
try refreshing the hyper-v by unchecking and then checking it again,this worked for me.
Steps:
1.control panel>>programs>>Programs and features>>turn windows features on and off>>hyper-v
2.uncheck it and restart the pc.
3.again go to control panel an check hyper-v and restart the pc again.
the try to run the emulator,should work..
another possible reason is that you did not start vs2013 as admin