Please I need your help, I think that I have read all the threads related to apache ode, I'm either blind or stupid cause I've looked everywhere but it seems like no one has ever had a problem with count
I have an input sequence (int array) and I use a loop to do a simple addition of its content, but the count on the sequence is always returning 1. This is driving me crazy please someone help me with this
I use eclipse luna, bpel designer plugin, tomcat 8, apache ode beta 2 (because of the inline from spec initialization variables)
I don't know what details I can add here, so if I have to add more info just tell me and I'll do it
Thanks in advance
EDIT:
Thanks Walker. I tried a simple test, I just wanted to assign the count on sequence. Here is my assign :
<bpel:copy>
<bpel:from expressionLanguage="urn:oasis:names:tc:wsbpel:2.0:sublang:xpath1.0">
<![CDATA[count($input.payload/tns:input)]]>
</bpel:from>
<bpel:to part="payload" variable="output">
<bpel:query queryLanguage="urn:oasis:names:tc:wsbpel:2.0:sublang:xpath1.0"><![CDATA[tns:result]]></bpel:query>
</bpel:to>
</bpel:copy>
Related
I'm using vkCmdDispatchIndirect, but I'd like to be able to specify non-zero base values, as you can with vkCmdDispatchBase. However, the struct VkDispatchIndirectCommand only has members for the number of workgroups, not base values.
The obvious answer is that you can't, but it seems odd to me that they'd provide the non-zero base functionality only in the non-indirect case, I figure I must be missing something.
You can't. Thanks for free 15 points :D
vkCmdDispatchBase was part of Device Groups extension, so the command was possibly only an afterthought.
If you think Indirect version should be in the API, the community here cannot help you. You need to petition Khronos at KhronosGroup/Vulkan-Docs.
I was wondering if there were a way to compute the size of a reg in Verilog. I researched it quite a bit, and found $size(a), but it's only in SystemVerilog, and it won't work in my verilog program.
Does anyone know an alternative for this??
I also wanted to ask as a side note; I'm having some trouble with my test bench in the sense that when I update a value in the file, that change is not taken in consideration when I simulate. I've been told I might have been using an old test bench but the one I am continuously simulating is the only one available in this project.
EDIT:
To give you an idea of what's the problem: in my code there is a "start" signal and when it is set to 1, the operation starts. Otherwise, it stays idle. I began writing the test bench with start=0, tested it and simulated it, then edited the test bench by setting start to 1. But when I simulate it, the start signal remains 0 in the waveform. I tried to check whether I was using another test bench, but it is the only test bench I am using in this project.
Given that I was on a deadline, I worked on the code so that it would adapt to the "frozen" test bench. I am getting now all the results I want, but I wanted to test some other features of my code, so I created a new project and copy pasted the code in new files (including the same test bench). But when I ran a simulation, the waveform displayed wrong results (even though I was using the exact same code in all modules and test bench). Any idea why?
Any help would be appreciated :)
There is a standardised way to do this, but it requires you to use the VPI, which I don't think you get on Modelsim's student edition. In short, you have to write C code, and dynamically link it to the simulator. In the C code, you can get object properties using routines such as vpi_get. Useful properites might be vpiSize, which is what you want, vpiLeftRange, vpiRightRange, and so on.
Having said all that, Verilog is essentially a static language, and objects have to be declared with a static width using constant expressions. Having a run-time method to determine an object's size is therefore of pretty limited value (since you should already know it), and may not solve whatever problem you actually have. Your question would make more sense for VHDL (and SystemVerilog?), which are much more dynamic.
Note on Icarus: the developers have pushed lots of SystemVerilog stuff back into the main language. If you take advantge of this you may find that your code is not portable.
Second part of your question: you need to be specific on what your problem actually is.
I have a problem with several references in my VB.NET project.
For example I have this line of code:
Dim m As New Chilkat.Email
It comes from the library "ChilkatDotNet45.dll".
When I click on "References" and locate this dll, I can see that it has the settings "Use local copy" and "Do not include interop types".
When I switch to Release mode, the compiler tells me that "Chilkat.EMail" is not defined.
I have this problem with several DLLs, so it is not specific to Chilkat.
Can somebody tell me what I did wrong?
Thank you.
One of the standard approaches to solving any programming-related issue is trying to reduce the scope of the investigation. If you have a big project, in which something doesn't work, try to create a smaller project, and try to replicate desired functionality in it. Reduce as much as possible, down to a brand new project with maybe 5-10 lines of code in it.
If you were unable to solve your problem after making a reduced test case, now it's good time to post it on StackOverflow. I am usually reducing problems while writing a question on SO (not before, as one might think), constantly thinking "ok, is it minimized enough"; and this is how 90% of the questions never get posted - I often find a solution along the way of reducing my question to bare bones. :)
In your case, can you build a simplified project which has this problem and post a link here? We could then try switching Debug to Release on our machines and see if the we can reproduce. There are too many options to do the guesswork.
we're currently customizing iNotes for a customer (platform currently is Domino 9). We almost reached our goals, but one thing that's on our todo list I can't really figure out: they want us to also customize any possible error pages; see the following example screenshot:
This and other similar pages seem to come from the central Forms9.nsf which I'd love to leave as it is. We so far tried domcfg.nsf mappings, but as this is an iNotes internal error it obviously can't work; I also tried to figure out a way to put seomething into our customized Forms9_x.nsf but without any hint this is too abstract for me.
So my questions are:
has anyone ever done this?
what options do we have (apart from "hacking" Forms9.nsf)?
Many thanks in advance...
Update:
After continuing to play with domcfg mappings I suddenly saw a first result; not sure what's the difference to the first attempts, though; maybe moving the error form to Forms9_x.nsf did the trick? I'll keep investigating and post an answer if I can find one...
Alright, this has been an afternoon of wild guessing and hacking along, but finally I think I found it:
first of all, my playing around with domcfg mappings didn't have to do with solving the problem; instead, I just by chance had put my error page form into my Forms9_x.nsf and named it $$ReturnGeneralError (that's simply the name used in Forms9.nsf...; I completely had forgotton about those 4 pre-defined form names back from Domino 5 times).
What did not work was the old method of simply including a text file named MessageString to display the exact error message returned from the server; obviously iNotes is handling those error strings differently.
After a few hours of testing, and comparing codes between the standard iNotes error page and mine I finally found it: include some iNotes specific computed text into the page, in my case that is
#{{MessageString}; html}
See this document for some details (last row in the table)
Hopefully this can help someone else as well...
Im trying to build an error-logger that loggs running values that is active in the function that caused the error. (just for fun so its not a critical problem)
When going in break-mode and looking at the locals-tab and autos-tab you can see all active variables (name, type and value), it would be useful to get hold of that for logging purposes when an error occur and on some other occasions.
For my example, I just want to find all local variables that are of type string and integer and store the name and value of them.
Is this possible with reflection? Any tips or pointers that get me closer to my goal would be very appreciated.
I have toyed with using expression on a specifik object (a structure) to create an automapper against a dataset, but I have not done anything like what I ask for above, so please make me happy and say its possible.
Thanks.
If you're looking to reproduce the behavior of the debugger, then you may want to be a debugger. See the Visual Studio Extensibility Learning Center. In particular, see the links under "Debuggers".