How to differentiate two time timeperiod between two columns? - sql

I wanna know how to differentiate a time period in a day between two columns like in time and out time?

DATEDIFF
DATEDIFF (datepart , startdate , enddate)
The datepart you have mentioend in your question is day. You can use any of day, d and dd
Sample
DECLARE #inTime DATETIME, #outTime DATETIME
SET #inTime = '2015-05-01 12:10:09'
SET #outTime = '2015-05-22 05:15:36'
SELECT DATEDIFF(DAY, #inTime, #outTime) AS timedifferentiate
In a query
SELECT ,inTime
,outTime
DATEDIFF(DAY, inTime, outTime) AS timedifferentiate
FROM yourTable

Just use a minus operator, and convert to time
SELECT
CONVERT(time, -- Note the time datatype range is 00:00:00.0000000 through 23:59:59.9999999
CONVERT(datetime, '2015-04-01 19:03') -- Out time
- CONVERT(datetime, '2015-04-01 09:02') -- In time
) TimeDiff

Related

SQL Column Concatenation whilst keeping the datatype of first column [duplicate]

In an extract I am dealing with, I have 2 datetime columns. One column stores the dates and another the times as shown.
How can I query the table to combine these two fields into 1 column of type datetime?
Dates
2009-03-12 00:00:00.000
2009-03-26 00:00:00.000
2009-03-26 00:00:00.000
Times
1899-12-30 12:30:00.000
1899-12-30 10:00:00.000
1899-12-30 10:00:00.000
You can simply add the two.
if the Time part of your Date column is always zero
and the Date part of your Time column is also always zero (base date: January 1, 1900)
Adding them returns the correct result.
SELECT Combined = MyDate + MyTime FROM MyTable
Rationale (kudos to ErikE/dnolan)
It works like this due to the way the date is stored as two 4-byte
Integers with the left 4-bytes being the date and the right
4-bytes being the time. Its like doing $0001 0000 + $0000 0001 =
$0001 0001
Edit regarding new SQL Server 2008 types
Date and Time are types introduced in SQL Server 2008. If you insist on adding, you can use Combined = CAST(MyDate AS DATETIME) + CAST(MyTime AS DATETIME)
Edit2 regarding loss of precision in SQL Server 2008 and up (kudos to Martin Smith)
Have a look at How to combine date and time to datetime2 in SQL Server? to prevent loss of precision using SQL Server 2008 and up.
If the time element of your date column and the date element of your time column are both zero then Lieven's answer is what you need. If you can't guarantee that will always be the case then it becomes slightly more complicated:
SELECT DATEADD(day, 0, DATEDIFF(day, 0, your_date_column)) +
DATEADD(day, 0 - DATEDIFF(day, 0, your_time_column), your_time_column)
FROM your_table
This is an alternative solution without any char conversions:
DATEADD(ms, DATEDIFF(ms, '00:00:00', [Time]), CONVERT(DATETIME, [Date]))
You will only get milliseconds accuracy this way, but that would normally be OK. I have tested this in SQL Server 2008.
This worked for me
CAST(Tbl.date as DATETIME) + CAST(Tbl.TimeFrom AS TIME)
(on SQL 2008 R2)
If you're not using SQL Server 2008 (i.e. you only have a DateTime data type), you can use the following (admittedly rough and ready) TSQL to achieve what you want:
DECLARE #DateOnly AS datetime
DECLARE #TimeOnly AS datetime
SET #DateOnly = '07 aug 2009 00:00:00'
SET #TimeOnly = '01 jan 1899 10:11:23'
-- Gives Date Only.
SELECT DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly))
-- Gives Time Only.
SELECT DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
-- Concatenates Date and Time parts.
SELECT
CAST(
DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly)) + ' ' +
DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
as datetime)
It's rough and ready, but it works!
If both of your fields are datetime then simply adding those will work.
eg:
Declare #d datetime, #t datetime
set #d = '2009-03-12 00:00:00.000';
set #t = '1899-12-30 12:30:00.000';
select #d + #t
If you used Date & Time datatype then just cast the time to datetime
eg:
Declare #d date, #t time
set #d = '2009-03-12';
set #t = '12:30:00.000';
select #d + cast(#t as datetime)
This was my solution which ignores the date value of the time column
CAST(Tbl.date as DATETIME) + CAST(CAST(Tbl.TimeFrom AS TIME) as DATETIME)
Hope this helps others
Convert the first date stored in a datetime field to a string, then convert the time stored in a datetime field to string, append the two and convert back to a datetime field all using known conversion formats.
Convert(datetime, Convert(char(10), MYDATETIMEFIELD, 103) + ' ' + Convert(char(8), MYTIMEFIELD, 108), 103)
Convert both field into DATETIME :
SELECT CAST(#DateField as DATETIME) + CAST(#TimeField AS DATETIME)
and if you're using Getdate() use this first:
DECLARE #FechaActual DATETIME = CONVERT(DATE, GETDATE());
SELECT CAST(#FechaActual as DATETIME) + CAST(#HoraInicioTurno AS DATETIME)
I had many errors as stated above so I did it like this
try_parse(concat(convert(date,Arrival_date),' ',arrival_time) as datetime) AS ArrivalDateTime
It worked for me.
Finding this works for two dates where you want time from one and date from the other:
declare #Time as datetime = '2021-11-19 12:34'
declare #Date as datetime = '2021-10-10'
SELECT #time + datediff(day, #Time, #Date)
DECLARE #Dates table ([Date] datetime);
DECLARE #Times table ([Time] datetime);
INSERT INTO #Dates VALUES('2009-03-12 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-26 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-30 00:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 12:30:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
WITH Dates (ID, [Date])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Date]), [Date] FROM #Dates
), Times (ID, [Time])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Time]), [Time] FROM #Times
)
SELECT Dates.[Date] + Times.[Time] FROM Dates
JOIN Times ON Times.ID = Dates.ID
Prints:
2009-03-12 10:00:00.000
2009-03-26 10:00:00.000
2009-03-30 12:30:00.000
To combine date from a datetime column and time from another datetime column this is the best fastest solution for you:
select cast(cast(DateColumn as date) as datetime) + cast(TimeColumn as datetime) from YourTable
SELECT CAST(CAST(#DateField As Date) As DateTime) + CAST(CAST(#TimeField As Time) As DateTime)
Another way is to use CONCATand CAST, be aware, that you need to use DATETIME2(x) to make it work. You can set x to anything between 0-7 7 meaning no precision loss.
DECLARE #date date = '2018-03-12'
DECLARE #time time = '07:00:00.0000000'
SELECT CAST(CONCAT(#date, ' ', #time) AS DATETIME2(7))
Returns 2018-03-12 07:00:00.0000000
Tested on SQL Server 14
simply concatenate both , but cast them first as below
select cast(concat(Cast(DateField as varchar), ' ', Cast(TimeField as varchar)) as datetime) as DateWithTime from TableName;
select s.SalesID from SalesTbl s
where cast(cast(s.SaleDate as date) as datetime) + cast(cast(s.SaleCreatedDate as time) as datetime) between #FromDate and #ToDate
The existing answers do not address the datetime2 datatype so I will add mine:
Assuming that you want to add a time value to a datetime2 value where:
The datetime2 value could contain non-zero time component and/or fractional seconds
The time value could contain the value 23:59:59.9999999 which is 86,399.9999999 seconds, 86,399,999,999.9 microseconds or 86,399,999,999,900 nanoseconds¹
Due to the limitations of dateadd function¹ you must add them in two steps:
Convert the time value to seconds and use dateadd(second, ...)
Extract the nanoseconds from the time value and use dateadd(nanosecond, ...) to add them to the date calculated above
declare #dv datetime2 = '2000-01-01 12:34:56.7890123';
declare #tv time = '23:59:59.9999999';
select dateadd(
nanosecond,
datepart(nanosecond, #tv),
dateadd(
second,
datepart(hour, #tv) * 60 * 60 + datepart(minute, #tv) * 60 + datepart(second, #tv),
#dv
)
);
-- 2000-01-02 12:34:56.7890122
¹ Nanosecond values might not fit in int datatype which dateadd function expects.
SELECT CAST(your_date_column AS date) + CAST(your_time_column AS datetime) FROM your_table
Works like a charm
I ran into similar situation where I had to merge Date and Time fields to DateTime field. None of the above mentioned solution work, specially adding two fields as the data type for addition of these 2 fields is not same.
I created below solution, where I added hour and then minute part to the date. This worked beautifully for me. Please check it out and do let me know if you get into any issues.
;with tbl
as
(
select StatusTime = '12/30/1899 5:17:00 PM', StatusDate = '7/24/2019 12:00:00 AM'
)
select DATEADD(MI, DATEPART(MINUTE,CAST(tbl.StatusTime AS TIME)),DATEADD(HH, DATEPART(HOUR,CAST(tbl.StatusTime AS TIME)), CAST(tbl.StatusDate as DATETIME)))
from tbl
Result: 2019-07-24 17:17:00.000

Combining Date and Time using DATEADD and DATEDIFF

I'm trying to create a new column by combining the date and time variables. For example, the data table looks like this and "StartDateTime" is the new variable I want to create.
Date StartTime *StartDateTime*
2014-03-20 1900-01-01 10:00:00.000 2014-03-30 10:00:00.000
2015-09-23 1900-01-01 11:00:00.000 2015-09-23 11:00:00.000
I used the cast function and it seems like my current code is working.
select *,
(cast(Date as datetime) + cast(StartTime as datetime)) as StartDateTime
from my_table
But I just saw this line of code on a random website and it seems like it does the same thing. However, I didn't really get the logic behind it.
select *,
DATEADD(day, 0, DATEDIFF(day, 0, Date)) + DATEADD(day, 0 -DATEDIFF(day, 0, StartTime), StartTime) As StartDateTime
from my_table
I believe the first part DATEADD(day, 0, DATEDIFF(day, 0, Date)) just returns the original date but I don't really get the second part. My understanding is DATEDIFF(day, 0, StartTime) would just return 0 and I'm not sure why 0 -DATEDIFF(day, 0, StartTime) is necessary.
Thank you.
This is one way to combine the date and time values into a single DateTime2:
declare #Samples as Table ( StartDate Date, StartTime DateTime2 );
insert into #Samples ( StartDate, StartTime ) values
( '2014-03-20', '1900-01-01 10:00:00.000' ),
( '2015-09-23', '1900-01-01 11:00:00.000' );
select StartDate, StartTime,
-- Demonstrate how to get the time with millisecond resolution from StartTime .
Cast( StartTime as Time(3) ) as StartTimeAsTime,
-- Combine the time from StartTime with the date from StartDate .
-- Get the time, convert it to milliseconds after midnight, and add it to the date as a DateTime2 .
DateAdd( ms, DateDiff( ms, 0, Cast( StartTime as Time(3) ) ), Cast( StartDate as DateTime2 ) ) as StartDateTime
from #Samples;
I have no idea what that code is doing. And the add operator is also not supported by all datetime datatypes. The correct solution is:
select *
, dateadd(second, datepart(second, StartTime), dateadd(minute, datepart(minute, StartTime), dateadd(hour, datepart(hour, StartTime), [Date])))
from (values (convert(datetime2(0),'2014-03-20'), convert(time,'10:00:00.000'))) as X ([Date], StartTime);
Ideally you would store your StartTime value in a time datatype. But the above code will still work with a datetime2 datetype (which is the recommended form of datetime to use).

SQL Check Current time is between two DATETIME columns

I need to check whether the current time is between two datetime column values.
And I only need to check the time is between the range and I don't want to check the date.
I know how to check a date is exists between a daterange like below
SELECT
*
FROM
Table1 T
WHERE
CAST(GETDATE() AS DATE) BETWEEN T.StartDate AND T.EndDate
We have stored start date and end date as folllows..
StartDate - 1900-01-01 08:00:00.000
EndDate - 1900-01-01 19:00:00.000
Is there something similar to this to check whether the time is exists in a date range?
if you only want to check time
SELECT *
FROM Table1 T
WHERE CAST(GETDATE() AS TIME) BETWEEN cast(T.StartDate as TIME) AND cast(T.EndDate as TIME)
Something like this I guess
declare #d1 datetime ='20171220 10:00'
, #d2 datetime = '20171220 12:00'
, #t time ='11:00';
select 'Yes' where #t between cast(#d1 as time) and cast(#d2 as time);
It worked when I tried like below
SELECT *
FROM Table1 T
WHERE CAST(GETDATE() AS TIME) BETWEEN CAST(T.StartDate AS TIME) AND CAST(T.EndDateAS TIME)
CONVERT() to TIME and then back to DATETIME and compare
WHERE CONVERT(DATETIME, CONVERT(TIME, GETDATE()))
BETWEEN T.StartDate AND T.EndDate

Time based filtering using sql

I need to select data based on date and time.I have two criteria.How to implement this.
1)select the data between 1-1-2013 and 1-10-2013 with time rage between 10 to 16
2)select the data between 1-1-2013 and 1-10-2013 with time range between 20 to 8 next morning
I implemented a code.Its only working for first criteria.Here is that code.
where date>='1-1-2013' AND date <'1-10-2013'
AND CAST(date AS TIME) between '10:00' and '16:00'
Here the date field in the table is datetime type.Pleases help to solve this
1)
WHERE Date Between '2013-01-01 10:00' AND '2013-10-01 16:00'
2)
WHERE Date Between '2013-01-01 20:00' AND '2013-10-01 08:00'
Try this:
DECLARE #tmp TABLE ( date DATETIME )
INSERT INTO #tmp
( date )
VALUES ( '2013-01-01 10:09:29' -- date - datetime
)
INSERT INTO #tmp
( date )
VALUES ( '2013-01-01 15:09:29' -- date - datetime
)
INSERT INTO #tmp
( date )
VALUES ( '2013-01-01 17:09:29' -- date - datetime
)
INSERT INTO #tmp
( date )
VALUES ( '2013-01-01 07:09:29' -- date - datetime
)
SELECT date
FROM #tmp AS t
WHERE CONVERT(DATE,date) >= CONVERT(DATE, '01-01-2013', 105)
AND CONVERT(DATE,date) <= CONVERT(DATE, '01-01-2013', 105)
AND CONVERT(TIME, date) BETWEEN CONVERT(TIME, '10:00')
AND CONVERT(TIME, '16:00')
did i understand correctly? i don't know..
try this
where date>='1-1-2013' AND date <'1-10-2013'
AND ((CAST(date AS TIME) between '10:00' and '16:00')
OR (CAST(date AS TIME) between '20:00' and '23:59')
OR (CAST(date AS TIME) between '00:00' and '08:00'))

How to combine date from one field with time from another field - MS SQL Server

In an extract I am dealing with, I have 2 datetime columns. One column stores the dates and another the times as shown.
How can I query the table to combine these two fields into 1 column of type datetime?
Dates
2009-03-12 00:00:00.000
2009-03-26 00:00:00.000
2009-03-26 00:00:00.000
Times
1899-12-30 12:30:00.000
1899-12-30 10:00:00.000
1899-12-30 10:00:00.000
You can simply add the two.
if the Time part of your Date column is always zero
and the Date part of your Time column is also always zero (base date: January 1, 1900)
Adding them returns the correct result.
SELECT Combined = MyDate + MyTime FROM MyTable
Rationale (kudos to ErikE/dnolan)
It works like this due to the way the date is stored as two 4-byte
Integers with the left 4-bytes being the date and the right
4-bytes being the time. Its like doing $0001 0000 + $0000 0001 =
$0001 0001
Edit regarding new SQL Server 2008 types
Date and Time are types introduced in SQL Server 2008. If you insist on adding, you can use Combined = CAST(MyDate AS DATETIME) + CAST(MyTime AS DATETIME)
Edit2 regarding loss of precision in SQL Server 2008 and up (kudos to Martin Smith)
Have a look at How to combine date and time to datetime2 in SQL Server? to prevent loss of precision using SQL Server 2008 and up.
If the time element of your date column and the date element of your time column are both zero then Lieven's answer is what you need. If you can't guarantee that will always be the case then it becomes slightly more complicated:
SELECT DATEADD(day, 0, DATEDIFF(day, 0, your_date_column)) +
DATEADD(day, 0 - DATEDIFF(day, 0, your_time_column), your_time_column)
FROM your_table
This is an alternative solution without any char conversions:
DATEADD(ms, DATEDIFF(ms, '00:00:00', [Time]), CONVERT(DATETIME, [Date]))
You will only get milliseconds accuracy this way, but that would normally be OK. I have tested this in SQL Server 2008.
This worked for me
CAST(Tbl.date as DATETIME) + CAST(Tbl.TimeFrom AS TIME)
(on SQL 2008 R2)
If you're not using SQL Server 2008 (i.e. you only have a DateTime data type), you can use the following (admittedly rough and ready) TSQL to achieve what you want:
DECLARE #DateOnly AS datetime
DECLARE #TimeOnly AS datetime
SET #DateOnly = '07 aug 2009 00:00:00'
SET #TimeOnly = '01 jan 1899 10:11:23'
-- Gives Date Only.
SELECT DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly))
-- Gives Time Only.
SELECT DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
-- Concatenates Date and Time parts.
SELECT
CAST(
DATEADD(dd, 0, DATEDIFF(dd, 0, #DateOnly)) + ' ' +
DATEADD(Day, -DATEDIFF(Day, 0, #TimeOnly), #TimeOnly)
as datetime)
It's rough and ready, but it works!
If both of your fields are datetime then simply adding those will work.
eg:
Declare #d datetime, #t datetime
set #d = '2009-03-12 00:00:00.000';
set #t = '1899-12-30 12:30:00.000';
select #d + #t
If you used Date & Time datatype then just cast the time to datetime
eg:
Declare #d date, #t time
set #d = '2009-03-12';
set #t = '12:30:00.000';
select #d + cast(#t as datetime)
This was my solution which ignores the date value of the time column
CAST(Tbl.date as DATETIME) + CAST(CAST(Tbl.TimeFrom AS TIME) as DATETIME)
Hope this helps others
Convert the first date stored in a datetime field to a string, then convert the time stored in a datetime field to string, append the two and convert back to a datetime field all using known conversion formats.
Convert(datetime, Convert(char(10), MYDATETIMEFIELD, 103) + ' ' + Convert(char(8), MYTIMEFIELD, 108), 103)
Convert both field into DATETIME :
SELECT CAST(#DateField as DATETIME) + CAST(#TimeField AS DATETIME)
and if you're using Getdate() use this first:
DECLARE #FechaActual DATETIME = CONVERT(DATE, GETDATE());
SELECT CAST(#FechaActual as DATETIME) + CAST(#HoraInicioTurno AS DATETIME)
I had many errors as stated above so I did it like this
try_parse(concat(convert(date,Arrival_date),' ',arrival_time) as datetime) AS ArrivalDateTime
It worked for me.
Finding this works for two dates where you want time from one and date from the other:
declare #Time as datetime = '2021-11-19 12:34'
declare #Date as datetime = '2021-10-10'
SELECT #time + datediff(day, #Time, #Date)
DECLARE #Dates table ([Date] datetime);
DECLARE #Times table ([Time] datetime);
INSERT INTO #Dates VALUES('2009-03-12 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-26 00:00:00.000');
INSERT INTO #Dates VALUES('2009-03-30 00:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 12:30:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
INSERT INTO #Times VALUES('1899-12-30 10:00:00.000');
WITH Dates (ID, [Date])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Date]), [Date] FROM #Dates
), Times (ID, [Time])
AS (
SELECT ROW_NUMBER() OVER (ORDER BY [Time]), [Time] FROM #Times
)
SELECT Dates.[Date] + Times.[Time] FROM Dates
JOIN Times ON Times.ID = Dates.ID
Prints:
2009-03-12 10:00:00.000
2009-03-26 10:00:00.000
2009-03-30 12:30:00.000
To combine date from a datetime column and time from another datetime column this is the best fastest solution for you:
select cast(cast(DateColumn as date) as datetime) + cast(TimeColumn as datetime) from YourTable
SELECT CAST(CAST(#DateField As Date) As DateTime) + CAST(CAST(#TimeField As Time) As DateTime)
Another way is to use CONCATand CAST, be aware, that you need to use DATETIME2(x) to make it work. You can set x to anything between 0-7 7 meaning no precision loss.
DECLARE #date date = '2018-03-12'
DECLARE #time time = '07:00:00.0000000'
SELECT CAST(CONCAT(#date, ' ', #time) AS DATETIME2(7))
Returns 2018-03-12 07:00:00.0000000
Tested on SQL Server 14
simply concatenate both , but cast them first as below
select cast(concat(Cast(DateField as varchar), ' ', Cast(TimeField as varchar)) as datetime) as DateWithTime from TableName;
select s.SalesID from SalesTbl s
where cast(cast(s.SaleDate as date) as datetime) + cast(cast(s.SaleCreatedDate as time) as datetime) between #FromDate and #ToDate
The existing answers do not address the datetime2 datatype so I will add mine:
Assuming that you want to add a time value to a datetime2 value where:
The datetime2 value could contain non-zero time component and/or fractional seconds
The time value could contain the value 23:59:59.9999999 which is 86,399.9999999 seconds, 86,399,999,999.9 microseconds or 86,399,999,999,900 nanoseconds¹
Due to the limitations of dateadd function¹ you must add them in two steps:
Convert the time value to seconds and use dateadd(second, ...)
Extract the nanoseconds from the time value and use dateadd(nanosecond, ...) to add them to the date calculated above
declare #dv datetime2 = '2000-01-01 12:34:56.7890123';
declare #tv time = '23:59:59.9999999';
select dateadd(
nanosecond,
datepart(nanosecond, #tv),
dateadd(
second,
datepart(hour, #tv) * 60 * 60 + datepart(minute, #tv) * 60 + datepart(second, #tv),
#dv
)
);
-- 2000-01-02 12:34:56.7890122
¹ Nanosecond values might not fit in int datatype which dateadd function expects.
SELECT CAST(your_date_column AS date) + CAST(your_time_column AS datetime) FROM your_table
Works like a charm
I ran into similar situation where I had to merge Date and Time fields to DateTime field. None of the above mentioned solution work, specially adding two fields as the data type for addition of these 2 fields is not same.
I created below solution, where I added hour and then minute part to the date. This worked beautifully for me. Please check it out and do let me know if you get into any issues.
;with tbl
as
(
select StatusTime = '12/30/1899 5:17:00 PM', StatusDate = '7/24/2019 12:00:00 AM'
)
select DATEADD(MI, DATEPART(MINUTE,CAST(tbl.StatusTime AS TIME)),DATEADD(HH, DATEPART(HOUR,CAST(tbl.StatusTime AS TIME)), CAST(tbl.StatusDate as DATETIME)))
from tbl
Result: 2019-07-24 17:17:00.000