Hi i Have a Select Inner Join Statement it seems ok but i got error. this is my query
ALTER PROCEDURE [dbo].[POBalance] #PONumber nvarchar(50)
AS BEGIN
Select(
Select
A.Description,
C.qty as POqty,
B.QtyDelivered as PDQty,
case when A.partialflag ='false'
then '0'
else
A.qty end as Balance,
A.Unit,
A.Unitprice,
A.Partialflag
from tblPOdetails as A
Inner Join ( SELECT id, SUM(Qty) AS QtyDelivered
FROM dbo.tblPDdetails
WHERE (PONo = #PONumber)
GROUP BY id)as B On A.id = B.id
Inner Join tblpodetailshistory as C on A.id =C.id
where A.PONo = #PONumber)
END
I got this Error.
Only one expression can be specified in the select list when the
subquery is not introduced with EXISTS.
Thank you in Advance.
You should include the column names and From keyword in the outer select statement
ALTER PROCEDURE [dbo].[POBalance] #PONumber nvarchar(50)
AS BEGIN
Select Description, POqty, PDQty, Balance, Unit, Unitprice, Partialflag from (
Select
A.Description,
C.qty as POqty,
B.QtyDelivered as PDQty,
case when A.partialflag ='false'
then '0'
else
A.qty end as Balance,
A.Unit,
A.Unitprice,
A.Partialflag
from tblPOdetails as A
Inner Join ( SELECT id, SUM(Qty) AS QtyDelivered
FROM dbo.tblPDdetails
WHERE (PONo = #PONumber)
GROUP BY id)as B On A.id = B.id
Inner Join tblpodetailshistory as C on A.id =C.id
where A.PONo = #PONumber)
END
Actually you don't need to write the outer select, it can be rewritten as
ALTER PROCEDURE [dbo].[POBalance] #PONumber nvarchar(50)
AS BEGIN
Select
A.Description,
C.qty as POqty,
B.QtyDelivered as PDQty,
case when A.partialflag ='false'
then '0'
else
A.qty end as Balance,
A.Unit,
A.Unitprice,
A.Partialflag
from tblPOdetails as A
Inner Join ( SELECT id, SUM(Qty) AS QtyDelivered
FROM dbo.tblPDdetails
WHERE (PONo = #PONumber)
GROUP BY id)as B On A.id = B.id
Inner Join tblpodetailshistory as C on A.id =C.id
where A.PONo = #PONumber
END
The issue is at the beginning of your query,
Select( Select ....
Remove the initial "Select (" and retry the query. When you run a
Select (Select ..)
the second select can only return one column (unless you concatenate the returned data).
Related
In this stored procedure, I need to pass multiple parameter values in #GDNNO. Right now I can pass only a single value.
Please help me.
ALTER PROCEDURE dbo.xspSHEGONPrintQuery4
#GDNNO varchar(4000) = ''
AS
BEGIN
SELECT
a.ID, a.[To], a.FlowCode, a.TranNum, a.Status,
ART.ARTICLECODE, StockGDNID, DetailID, SubDocCode, ArticleID,
ColorCode, ColorName, SizeCode, SizeName,
DispatchedUnits * (CASE WHEN u.value IS NULL THEN FreezeStoringUOM ELSE u.value END) AS DispatchedUnits
FROM
xtstockgdn a (nolock)
JOIN
xtstockgdndetail b (nolock) ON a.id = b.stockgdnid
JOIN
XTARTICLE ART (nolock) ON ART.ID = B.ARTICLEID
LEFT JOIN
xtUOMConversion u (nolock) ON u.FromUOM = art.StoringUOM
AND u.ToUOM = art.consuom
WHERE
a.ID IN (#GDNNO)
AND FlowCode = 'POO_RET[E-]'
END
Since your query is only Select it can be change to TVF(table-value function). Change your Procedure to TVF
CREATE FUNCTION dbo.xspSHEGONPrintQuery4(
#GDNNO varchar(4000) = ''
)
RETURNS TABLE
AS
RETURN
SELECT
a.ID, a.[To], a.FlowCode, a.TranNum, a.Status,
ART.ARTICLECODE, StockGDNID, DetailID, SubDocCode, ArticleID,
ColorCode, ColorName, SizeCode, SizeName,
DispatchedUnits * (CASE WHEN u.value IS NULL THEN FreezeStoringUOM ELSE u.value END) AS DispatchedUnits
FROM
xtstockgdn a (nolock)
JOIN
xtstockgdndetail b (nolock) ON a.id = b.stockgdnid
JOIN
XTARTICLE ART (nolock) ON ART.ID = B.ARTICLEID
LEFT JOIN
xtUOMConversion u (nolock) ON u.FromUOM = art.StoringUOM
AND u.ToUOM = art.consuom
WHERE
a.ID IN (#GDNNO)
AND FlowCode = 'POO_RET[E-]'
END
Then use Cross apply to your TVF
Select a.GDNNO,b.* from yourtable a /*list of GDNNO Values */
Cross Apply dbo.xspSHEGONPrintQuery4(a.GDNNO) b
you can use Dynamic query as well
WITH c AS
(SELECT A.QuestionHdrKey AS QuestionHdrKey1,
A.DivisionKey AS DivisionKey1,
COUNT(1) AS QCount
FROM Mobile.QuestionLocationMap A WITH (NOLOCK)
INNER JOIN Mobile.Question b WITH (NOLOCK) ON A.QuestionKey = b.PKey
WHERE A.QuestionHdrKey = 200305685377000000
GROUP BY A.QuestionHdrKey,
A.DivisionKey),
d AS
(SELECT a.QuestionHdrKey,
a.QuestionKey,
a.DivisionKey,
a.InvDate,
a.HdrKey,
ROW_NUMBER() OVER (PARTITION BY a.DivisionKey,
a.invdate,
a.HdrKey
ORDER BY a.QuestionKey) AS RowId
FROM mobile.StatusReport a WITH (NOLOCK)
INNER JOIN mobile.Question b WITH (NOLOCK) ON a.QuestionKey = b.PKey
AND b.QuestionType = 'rate'
AND InputType = 'numeric'
WHERE a.QuestionHdrKey = '200305685377000000'
GROUP BY a.QuestionHdrKey,
a.DivisionKey,
a.HdrKey,
a.InvDate,
a.QuestionKey)
SELECT a.DivisionKey,
a.InvDate AS ModifiedDate,
a.QuestionHdrKey,
a.HdrKey,
COUNT(DISTINCT a.QuestionKey) AS QuestionKey,
SUM(CAST(a.Value AS int)) AS value,
SUM(b.Rate) AS RATE
--case when a.invdate between '2020-05-09' and '2022-03-31' then case when then case when cast(Value as int)*5>5 then 5 else cast(Value as int)*5 end else cast(Value as int) end as value,c.QCount
FROM mobile.StatusReport a WITH (NOLOCK)
INNER JOIN mobile.Question b WITH (NOLOCK) ON a.QuestionKey = b.PKey
AND b.QuestionType = 'rate'
AND InputType = 'numeric'
INNER JOIN c WITH (NOLOCK) ON a.DivisionKey = c.DivisionKey1
INNER JOIN d WITH (NOLOCK) ON a.HdrKey = d.HdrKey
AND a.QuestionKey = d.QuestionKey
WHERE a.QuestionHdrKey = '200305685377000000'
--and a.HdrKey='210305757994230000'
AND d.RowId <= c.QCount
GROUP BY a.DivisionKey,
a.InvDate,
a.QuestionHdrKey,
a.HdrKey,
c.QCount;
I have this table queried in PowerBI which generates the below table:
The SQL is validated successfully in Information Design Tool but when trying to view its values, it shows an error in the code. How do I work around this?
Alright, after figuring out that "with as" doesn't work outside of the select function in the IDS, I've ditched the aliases and used sub-queries.
select HdrKey,a.DivisionKey,InvDate,RowId ,count(b.QuestionKey) as QCount,qCOUNT_,[value],POINT
from
(select distinct a.HdrKey,a.DivisionKey, a.InvDate, ROW_NUMBER() OVER(PARTITION BY QuestionHdrKey, DivisionKey, a.InvDate ORDER BY a.InvDate) AS RowId,
sum(cast([value] as int)) AS [value], COUNT(DISTINCT A.QuestionKey) AS qCOUNT_, SUM(B.Rate) AS POINT
from NominInventory.mobile.StatusReport a with(nolock)
inner join NominInventory.mobile.Question b with(nolock) on a.QuestionKey=b.PKey and B.QuestionType = 'rate' and InputType='numeric'
where a.QuestionHdrKey='200305685377000000'
GROUP BY a.HdrKey,a.DivisionKey, a.InvDate,QuestionHdrKey
) a
inner join NominInventory.Mobile.QuestionLocationMap b with(nolock) on a.DivisionKey=b.DivisionKey and b.QuestionHdrKey = '200305685377000000'
group by HdrKey,a.DivisionKey,InvDate,RowId,qCOUNT_,[value],POINT
having a.RowId<=count(b.QuestionKey)
It works well so far but I am stumped from here as I am brand new to this. This query finds the closest distance match, pairing up every item in the "FAILED" folder against everything that isn't in the "FAILED" folder.
There is a column "RouteID" in the "table p" that I want to match up with the min() aggregate.
I cannot process how to make the SELECT query simply show the associated "RouteID" column from tbl p but ultimately, I want to turn this into an update query that will SET a.Route = p.Route that is associated with the min()
Any help would be appreciated.
SELECT a.name, a.Reference1,
MIN(round(ACOS(COS(RADIANS(90-a.lat))
*COS(RADIANS(90-p.latpoint))
+SIN(RADIANS(90-a.lat))
*SIN(RADIANS(90-p.latpoint))
*COS(RADIANS(a.lon-p.longpoint)))
*3958.756,2)) AS 'DISTANCE'
FROM tblOrder AS a WITH (NOLOCK)
LEFT JOIN
(
SELECT b.lat AS latpoint, b.lon AS longpoint,
b.Sequence, b.routeid
from tblOrder b WITH (NOLOCK)
WHERE b.CUSTID = 180016
AND b.routeID <> 'FAILED'
AND b.StopType = 1
) AS p ON 1=1
WHERE a.CustID = 180016
AND a.RouteID = 'FAILED'
AND a.StopType = 1
AND P.RouteID <> 'FAILED'
GROUP BY
a.name, a.Reference1
You can select them separately and then join them
SELECT c.name, c.Reference1, q.RouteID
FROM
(
SELECT a.name, a.Reference1,
MIN(round(ACOS(COS(RADIANS(90-a.lat))
*COS(RADIANS(90-p.latpoint))
+SIN(RADIANS(90-a.lat))
*SIN(RADIANS(90-p.latpoint))
*COS(RADIANS(a.lon-p.longpoint)))
*3958.756,2)) AS 'DISTANCE'
FROM tblOrder AS a WITH (NOLOCK)
LEFT JOIN
(
SELECT b.lat AS latpoint, b.lon AS longpoint,
b.Sequence, b.routeid
from tblOrder b WITH (NOLOCK)
WHERE b.CUSTID = 180016
AND b.routeID <> 'FAILED'
AND b.StopType = 1
) AS p ON 1=1
WHERE a.CustID = 180016
AND a.RouteID = 'FAILED'
AND a.StopType = 1
AND P.RouteID <> 'FAILED'
GROUP BY
a.name, a.Reference1
) c
LEFT JOIN
(
SELECT b.lat AS latpoint, b.lon AS longpoint,
b.Sequence, b.routeid
from tblOrderRouteStops b WITH (NOLOCK)
WHERE b.CUSTID = 180016
AND b.routeID <> 'FAILED'
AND b.StopType = 1
) AS q
ON q.routeID = c.DISTANCE
I have this query:
SELECT t_ticket.ticketID, t_ticket.addedDate, t_ticket.question,
t_ticket.code, t_ticket.priority, t_actionTicket.addedDateAction, t_actionTicket.title
FROM t_actionTicket INNER JOIN
t_ticket ON t_actionTicket.ticketID_FK = t_ticket.ticketID INNER JOIN
(SELECT ticketID_FK, MAX(addedDateAction) AS maxDate
FROM t_actionTicket AS t_actionTicket_1
WHERE (t_actionTicket.userID_FK <> #userid)
GROUP BY ticketID_FK) AS b ON t_actionTicket.ticketID_FK = b.ticketID_FK AND t_actionTicket.addedDateAction = b.maxDate
WHERE (t_ticket.supporterID_FK IN
(SELECT supporterID
FROM t_Supporter
WHERE (userID_FK = #userid)))
I want to return just the latest record in t_actionTicket table for each row in t_ticket table that t_actionTicket.userID_FK <> #userid.
but I have this error:
The multi-part identifier "t_actionTicket.userID_FK" could not be
bound.
Problem in your query is
FROM t_actionTicket AS t_actionTicket_1
WHERE t_actionTicket.userID_FK <> #userid -- here
You cannot use t_actionTicket alias name inside inner join select query. You need to use t_actionTicket_1. It is possible only in sub-query
Try this better way of doing it
;WITH cte
AS (SELECT t_ticket.ticketID,
t_ticket.addedDate,
t_ticket.question,
t_ticket.code,
t_ticket.priority,
t_actionTicket.addedDateAction,
t_actionTicket.title,
Row_number()
OVER(
partition BY ticketID_FK
ORDER BY addedDateAction DESC) RN
FROM t_actionTicket
INNER JOIN t_ticket
ON t_actionTicket.ticketID_FK = t_ticket.ticketID
WHERE t_ticket.supporterID_FK IN (SELECT supporterID
FROM t_Supporter
WHERE userID_FK = #userid))
SELECT *
FROM cte
WHERE rn = 1
You can write this logic using row_number() instead of additional nested queries:
SELECT t.ticketID, t.addedDate, t.question, t.code, t.priority,
ta.addedDateAction, ta.title AS Expr1
FROM t_Ticket t INNER JOIN
(SELECT ta.*,
ROW_NUMBER() OVER (PARTITION BY ta.ticketID_FK ORDER BY ta.addedDateAction DESC) as seqnum
FROM t_actionTicket ta
) ta
ON t.ticketId = ta.ticketId_FK and ta.seqnum = 1
WHERE t.supporterID_FK IN (SELECT supporterID
FROM t_Supporter
WHERE userID_FK = #userid
);
Note that table aliases make the query easier to write and to read.
Try this query
SELECT t_ticket.ticketID, t_ticket.addedDate, t_ticket.question,
t_ticket.code, t_ticket.priority, t_actionTicket.addedDateAction, t_actionTicket.title
FROM t_actionTicket
INNER JOIN t_ticket ON t_actionTicket.ticketID_FK = t_ticket.ticketID
INNER JOIN (SELECT ticketID_FK, MAX(addedDateAction) AS maxDate
FROM t_actionTicket AS t_actionTicket_1
WHERE (t_actionTicket_1.userID_FK <> #userid)
GROUP BY ticketID_FK) AS b ON t_actionTicket.ticketID_FK = b.ticketID_FK AND t_actionTicket.addedDateAction = b.maxDate
WHERE (t_ticket.supporterID_FK IN
(SELECT supporterID
FROM t_Supporter
WHERE (userID_FK = #userid)))
Using a group by to group a select stament
SELECT
k.Ivalue, k.JOBDESCRIPTION ,
count( k.Ivalue) as TOTAL
FROM
(SELECT
a."ID" as Ivalue, b."JOBDESCRIPTION", rq."CURRENTSTATUS"
FROM
tblG2o_Requests a
INNER JOIN
tblG2o_JOBS b ON a."JOBPOSTID" = b."ID"
INNER JOIN
(SELECT
r.REQUESTID, ir."CURRENTSTATUS"
FROM
TBLG2O_RESULTSPOOL r
INNER JOIN
tblG2o_Requests ir ON r.RequestID = ir."ID"
WHERE
r.ShortListed = '1') rq ON rq.REQUESTID = a."ID"
WHERE
"ACTIVE" = '1'
AND "DATECOMPLETED" IS NULL
ORDER BY
"REQUESTDATE" DESC) k
GROUP BY
k.JOBDESCRIPTION
What is the question? You seem to be missing the group by clause, and you do not need double quotes around field names unless you have spaces in them, and even then, if TSQL for example, you would use [] in preference.
I had to remove an ORDER BY in the subquery, that isn't allowed unless other conditions demand it (like TOP n in TSQL)
SELECT
k.Ivalue
, k.JOBDESCRIPTION
, COUNT(k.Ivalue) AS TOTAL
FROM (
SELECT
a.ID AS Ivalue
, b.JOBDESCRIPTION
, rq.CURRENTSTATUS
FROM tblG2o_Requests a
INNER JOIN tblG2o_JOBS b
ON a.JOBPOSTID = b.ID
INNER JOIN (
SELECT
r.REQUESTID
, ir.CURRENTSTATUS
FROM TBLG2O_RESULTSPOOL r
INNER JOIN tblG2o_Requests ir
ON r.RequestID = ir.ID
WHERE r.ShortListed = '1'
) rqenter
ON rq.REQUESTID = a.ID
WHERE ACTIVE = '1'
AND DATECOMPLETED IS NULL
) k
GROUP BY
k.Ivalue
, k.JOBDESCRIPTION
Finally worked
SELECT
k.Ivalue
, l.JOBDESCRIPTION
, k.TOTAL,
k.CURRENTSTATUS
FROM (
SELECT
a.ID AS Ivalue
,b.ID as JobPostID
, rq."CURRENTSTATUS"
,COUNT(a.ID) AS TOTAL
FROM tblG2o_Requests a
INNER JOIN tblG2o_JOBS b
ON a."JOBPOSTID" = b.ID
INNER JOIN (
SELECT
r."REQUESTID"
, ir."CURRENTSTATUS"
FROM TBLG2O_RESULTSPOOL r
INNER JOIN tblG2o_Requests ir
ON r."REQUESTID" = ir.ID
WHERE r."SHORTLISTED" = 1
) rq
ON rq."REQUESTID" = a.ID
WHERE ACTIVE = '1'
AND DATECOMPLETED IS NULL
GROUP BY
a.ID ,b.ID
, rq."CURRENTSTATUS" ) k
inner join tblG2o_JOBS l on k.JobPostID =l.ID
enter code here