Running a script to get a file from SFTP server, however this is recurring job and should still succeed if no file exist, is there an option I can specify?
option batch on
option confirm off
option transfer binary
open sftp://server -timeout=60
password
get /File/2_04-28-2015.txt D:\Files
close
exit
Getting this result:
Can't get attributes of file 'File/2_04-28-2015.txt'.
No such file or directory.
Error code: 2
Tried setting failonnomatch:
winscp> option failonnomatch on
Unknown option 'failonnomatch'.
You cannot tell WinSCP to ignore absent file, when using a specific file name.
But you can check the file existence prior to the actual download.
Easy alternative hack is to use a file mask (note the trailing *) and set the failonnomatch off:
option failonnomatch off
get /File/2_04-28-2015.txt* D:\Files\
(if you are getting "Unknown option 'failonnomatch'", then you have an old version of WinSCP).
Have you tried using MGET instead of GET? It shouldn't fail, just not transfer anything if there's nothing there.
Related
For example, I want to open a PDF file in the browser from the command line (just because it's much faster and I need to open many files at once) and when I use the command start [file name] from its directory it try to open it as a executable, so I need to open the browser and type the full path of the file as an attribute, is there a way to call the full path without typing it?
what I exactly need is I need the full path of a file to convert it to string (for example in the browser)
Using tab completions may help. For example, if your target file is named thisPDFisTotallyBananas.pdf and you have another file in the same folder named thisOtherPDFisNot.pdf, you could type thisP then TAB to complete the file name in the command prompt without needing to type the whole filename.
I have a jmx script which saves the results to a CSV file.
I need to see the 'failureMessage' field in the CSV especially when the 'success' column says 'false' as in the below example. But the failureMessage column always appear as blank irrespective in the csv
Example -
timeStamp|time|label|responseCode|threadName|dataType|success|failureMessage
02/06/03 08:21:42|1187|Home|200|Thread Group-1|text|true|
02/06/03 08:21:42|47|Login|200|Thread Group-1|text|false|Test Failed: expected to contain: password etc.
I tried looking up the jmeter.properties file to check the below which is set to true. But it still doesn't save the message to failureMessage in the csv.
assertion_results_failure_message only affects CSV output
jmeter.save.saveservice.assertion_results_failure_message=true
I cannot reproduce your issue using:
Latest JMeter 5.2.1
With the default Results File Configuration
Running JMeter in command-line non-GUI mode
Demo:
If you cannot see custom assertion failure messages your setup violates at least one of the above 3 points.
Try adding assertions with your requests and you will find it in your results in case of assertions getting failed.
I want to check a file in Unix via Automic. If the file doesnt exist it should switch the host and check if the file is there.
The problem is, that I dont now how to implement a error handling.
Everytime the script object is processing and cant find the file the skript aborted. I need a new starting point in the skript but "ON_ERROR" or ":RESTART" doesnt work.
How can I implement a logic like this: IF the script aborted due to the error-massage 'No such file or directory'start the script from here instead.
Thank you very much for your help!
Best regards
I have solved it. Use the function PREP_PROCESS_FILENAME to check if the file exists in the folder!
You have to start the task twice in the same workflow. The task-job checks if the script exists otherwise nothing to do.
if [ -f "/path/to/script" ]
then
bash /path/to/script
else
echo "Script not found"
fi
In Post-Script you can modify the state for the empty task with :MODIFY_STATE. Depend on report or returncode
QDB is a database provided by QNX Neutrino package. I went through the QDB documentation to add a user defined SQL function: http://www.qnx.com/developers/docs/6.5.0/topic/com.qnx.doc.qdb_en_dev_guide/writing_functions.html?cp=2_0_8
I created a source file which had my user define SQL function written in C and qdb_function structure definition. I built it with a make file to create libudf.so.
As suggested by QDB I added Function = udftag#libudf.so in the qdb.cfg. But while running the qdb in the shell prompt, it is giving the error (in bold):
qdb -I basic -V -R set -v -c /etc/sql/qdb.cfg -s de_DE#cldr -o tempstore=/fs/tmpfs
QDB: No script registered for handling corrupt database.
qdb: processing [TempMainAddressBook]Function - Can't access shared library
and qdb is getting exited immediately.
I have tried following things:
made sure sqlite3 library is added in the make file
source code is in strictly in C by using directive : extern "C" to avoid name mangling as the file extension is .cpp. I also tried with .c extension.
given the absolute path of the libudf.so in qdb.cfg as : Function = udftag#/usr/lib/libudf.so
qdb_funcion struct is properly defined in library's source code only.
tried without using the static declaration of function(mentioned in the qdb docs)
After trying all hits and trials also, I am getting the same error every time which is Can't access shared library
If any one has any idea to resolve this error please share.
Suggestion 1: run qdb by setting LD_DEBUG=1, like in:
LD_DEBUG=1 qdb command line options
This will output a lot of debug information from the dynamic loader as it attempts to locate and then load the .so files. Check what is the path that it output before the "Can't access" message is displayed.
Suggestion 2: obvious but make sure that the permissions are OK for the .so file. Do you have the execution permission set?
Suggestion 3: check if the error message is identical if you completely remove the .so file from the system
Suggestion 4: increase the number of lower-case 'v'-s. QDB likely supports more, with progressively more verbose information provided as you increase the numbers (6 should be enough for full verbosity)
By default AutoCAD installs a text based file called acad2010.lsp at the set location below
Dim FILE_NAME As String = "C:\Program Files\AutoCAD 2010\Support\acad2010.lsp"
However it my be that the user/ administrator/ or third party has changed the location of this file. Is it possible to then locate it using the following
Dim FILE_NAME As String = "C:\*\acad2010.lsp"
In other words search the entire c:\ drive for file acad2010.lsp?
If this doesn't work can you please let me know what would?
You could search for it with an FSO. It's not going to be fast however you do it but this is the fastest way I can think of.
http://www.microbion.co.uk/developers/fso.htm should give you a rough idea of how it's done.
Your solution will not work. Is not possible to locate it using *. (BTW is possible in ms-builds scripts). The only way of doing it is:
1- Create a FindFile function (check for example
http://xlvba.3.forumer.com/index.php?showtopic=125)
2- Use it to locate the exact path of the file. (It could be really time
consuming)
3- From this point your code is the same...
Unfortunately, you can't use wildcards in a filepath. You have two options:
Prompt the user for the file location using the "Open File" dialog. The code to do this varies based on which Office product you are using. In Excel, you would use the Application.FindFile method (more info here).
Write your own function to search the filesystem for the file. Microsoft provides an example here.
If that file is used by internal functions of the application, the installer will have recorded a registry key for the file's location.
Open regedit.exe and search for the file name and path.
You can read a registry entry using this VBA one-liner:
CreateObject("WScript.Shell").RegRead(strRegPath)
You may need a terminating backslash on the key address, but that's a safe and simple registry access method. More details on the MSDN site:
https://msdn.microsoft.com/en-us/library/x05fawxd%28v=vs.84%29.aspx