My goal is to get a count of users in each group returned from the Yammer Data Export API. The list of groups that is returned from the data export api belong to roughly 15 networks. When querying the endpoints listed below, I am getting results back for the 1 main network, but not for the other 14. Are there any known limitations for the REST API in regards to accessing data for some of the networks returned from the data export API. In other words, there is information provided in the data export API, but when trying to expand on that information using the REST API, nothing is returned.
https://www.yammer.com/api/v1/groups/{group_id}.json
https://www.yammer.com/api/v1/users/in_group/{group_id}.json
Any help would be much appreciated.
Are there any known limitations for the REST API in regards to
accessing data for some of the networks....
By design, the access token (that you're using in your code) is tied to ONLY one network and that explains why you can ONLY get results from ONLY that network.
Related
I've just started looking at the documentation as we are going to need to integrate Salesforce with Social Tables shortly, so I am really new to Social Tables.
Specifically, we will need to sync data between the CRM and Social Tables Events and Guests, and maybe other objects, so it would be very helpful to have a data model or similar to check the relationships and fields available in Social Tables architecture.
I haven't found anything in the documentation, is there any way to get this, even if it's at a high level?
Thanks
Danny
To make an integration with SocialTables you'll have to do a few manual steps, there is no way to do this completely programmatic from my experience. You'll also have to be prepared to contact SocialTables to get get correct guestlist ids. Also keep in mind that the API documentation isn't always correct, the API logic is also quite difficult to understand from time to time.
The first thing you need to do is figure out which version of the Venue Mapper you use. You'd want to use the 4.0 api and as far as I know this version of the api is only supported by Venue Mapper 3.0. I believe the Venue Mapper 3.0 is the frontend tool SocialTables provides to do the venue planning.
In social tables an event has two ids, one numerical one and one alpha-numerical one, when you use the 4.0/events endpoint you only get the alpha-numerical event id, and your going to need the numerical one. The only way I've been able to get the numerical id is to pull it out from the url when using the Venue Mapper, example of the url follows below:
https://plan.socialtables.com/team/{team_id}/event/{event_id}/space/{space_id}
Now you need to get the guestlist id, you can get that by using the following url, using the numerical event id:
GET https://api.socialtables.com/4.0/diagrams?event={numerical_event_id}
This endpoint return a json structure where one of the parameters is "guestlist_id".
Please be aware that the guestlist id you get from this endpoint might not be the correct one. I struggled quite a bit with this part and ended up with SocialTables sending me the guestlist id by email.
To get the guests in your guestlist use the following api endpoint:
GET https://api.socialtables.com/4.0/guestlists/{guestlist_id}
The {guestlist_id} is an alpha-numerical string similar to: cfdac1c0-yb1d-12e6-84a5-a39e92131645
And by that you should hopefully get access to your guests.
Hey thanks for using our API.
To answer your question, the best way to see the data model at the moment is to access our developer portal and use the API console to see what is returned. For events you will need to know the team id of the team you are working with use the team events endpoint to get access to the event ids.
https://developer.socialtables.com/api-console#!/Events/get_4_0_legacyvm3_teams_team_events
This will return some basic information about each event for that team. You can then request additional details for specific events by using this endpoint:
https://developer.socialtables.com/api-console#!/Events/get_4_0_legacyvm3_events_event
Is there anyway to find out how many webapi calls that are used against quota when doing rest API call (or soap api call) reading leads from a list? Please note that this is purely read-only, where we are getting data from a static list of leads, which are added using a smart campaign.
We are bringing in 40 attributes from the Marketo lead record total 1600 chars. Depending on need, we might need to stage anywhere from 200K to 1 million records into a static list. We are successfully extracting all that data, but we would like to find out how many API calls are being utilized.
Each authenticated request to an endpoint counts as a call. You can also the usage API to see your daily usage: http://developers.marketo.com/documentation/rest/get-daily-usage/
I have an android application connected to magento server by rest api. The application must preform some actions, but I have no examples of requests needed for the application.
For example I have this list of requests, but it is superficial enough for my application. For example, I do request:
"http://myUrl.com/api/rest/products?limit=15" and receive the list of 15 products. But after I need to receive next 15 product, and next, and next... What request can do it?
Also I need to do another requests which have no in site examples.
Where can I get more information and examples about rest api requests? Thank You in advance.
You can use various get filters available for REST request in magento GET FILTERS. To access second page you can use page filter available i.e. "http://myUrl.com/api/rest/products?limit=15&page=2". You can also combine many filters and use them as you want. Eg. For getting a result of products which have their name like 'product123', you can use: magentohost/api/rest/products?filter[1][attribute]=name&filter[1][like]=%product123%.
QuickBooks Online (QBO) uses a URL format like qbo.intuit.com/app/timeactivity?txnId=123 to point to, in this example, a TimeActivity.
However, in the API, resources are referenced by entityId (returned as just Id when querying via the TimeActivity API), which is different from txnId.
In my time tracking web app, I have a feature that exports time to QBO as TimeActivities. I'd like to provide users with direct links from the time entered in my app to the corresponding TimeActivity in QBO—is there any way to do so?
The answer to this is that it's not currently possible because there's multiple base URLs (I think they call them "realms") in use for QuickBooks Online (qbo.intuit.com is only one of them). Because you do not receive this information as part of linking to QBO via OAuth, there's unfortunately no way to construct proper links.
Yes, when creating a successful TimeActivity you will receive back an Id, which I assume you are persisting.
That Id can be used to query QBO in a simple GET request.
<baseURL>/company/{companyID}/timeactivity/{timeactivityId}
Context
I am in the process of providing some consultancy on doing a HTTP GET using YouTube Data API V3; in order to develop a Windows based application to GET a list of results from Youtube, for say a specific CATEGORY, or a specific TAG.
We are open to using any programming language(I'm from a C++ background and am hoping You tube will support direct HTTP connections without using Google client SDK and so on) to connect to YouTube and (HTTP) GET data.(Once a month or so, so YouTube API quotas should not be problem).
The Issue
We are being told by some of my client's web developers that YouTube API v3 will only return a maximum of 500 records/results, for say a query that returns JUST the Total viewers, the Video's link, and basic meta data such as that.
S, say I wish to find 5,000 results for category "House music" or "basketball" - and I have the Developer Key etc are all set up, would that be possible?
If so, what GET fields would I need to populate(such as "max_results_per_page")?
Thank you.
The API won't provide more than ~500 search results for any arbitrary query. It's by design. Technically, it means that the nextPageToken field won't be returned once you hit ~500 results. No additional parameter can change that.
If you want more than ~500 results for a query, you have to split it into more specific sub-queries. I'd suggest using the publishedAfter and publishedBefore parameters to achieve that, but feel free to experiment with the other ones here.
This only holds for the search-Query. Other queries like "PlaylisItem:list" deliver more results. I have tested with 100.000 items to get the videos of a playlist.