Can I stop PhantomJS from creating dump files when it crashes?
Currently, phantomjs is creating several dmp files in my /tmp folder on my server. I know that the /tmp folder is cleaned up after each reboot; however this box never gets rebooted.
Thanks,
This answer worked for me: export a variable
export PHANTOMJS_DISABLE_CRASH_DUMPS="on"
Related
Trying to get the sidekick image built and having some issues. Is there any documentation other than the README.md file?
My current problem is with getting the JRE requirement working but there are others. The page says "download Oracle JRE and place it inside the working directory. Optionally if you have a company wide distribution url, use that one at a later step." and the help says "Java (JRE) download url or path inside working directory". Have not been able to get this to work.
I went to the JRE link provided and was presented with options to download a rpm file or a tar.gz file. Which is expected (was unable to get either one working)?
It says to place the file in the "working directory" but not sure where exactly. Tried in sidekick folder and in sidekick/jre both without success no matter what I used after the -j command. Is this just the path or should the filename be included as well? Can I get an example?
I'm running this script using my login but noticed the output folder is being created with root user and group. I see no indication that this should be run with sudo. What is the correct way to run this script?
Using debug, I see the function "download if not cached". Can I save these files (JRE, Bamboo jar file, etc.) somewhere so I don't have to worry about downloading them? If so, where should they go? Looks like I might have a problem with the wget to d/l the jar file so would like to just be able to place all these in a folder and be done with it.
It looks like the major problem is the script didn't clean up after itself if it fails. The issue was the first time it failed then that caused subsequent issues as the output folder was already there. Removing this directory between each attempt help.
As for the correct syntax for the -j JRE option I manually downloaded the JRE and placed in a folder called per-build-container/sidekick/stuff/. For the command line it is not just the path but the file name as well (the tar.gz and not the RPM). For my case it was
-j stuff/jre-8u251-linux-x64.tar.gz
Note I also ran the script as sudo. Wasn't stated but seemed to work OK.
Another issue I ran into was the download of the agent jar file. There is a redirect in the wget file that was not working for us. I ended up editing the script and replacing the Altassian based url with the redirected one.
This addresses all the issues I ran into with the initial question.
I'm currently trying to execute the hello.js example file in my Terminal but an completely failing to do so. The examples, I've found online either ask me to type:
phantomjs hello.js
my terminal returns
Can't open 'hello.js'
Or the absolute file path which for me is
/usr/local/Cellar/phantomjs/2.1.1/share/phantomjs/examples/hello.js
my terminal returns
-bash: /usr/local/Cellar/phantomjs/2.1.1/share/phantomjs/examples/hello.js: Permission denied
What am I doing wrong here? :(
Thanks in advance.
Screenshot
To run the file in Phantomjs, you either need to supply phantomjs with the full path to the file:
phantomjs /usr/local/Cellar/phantomjs/2.1.1/share/phantomjs/examples/hello.js
or you can make life a little easier on yourself by copying the examples directory to somewhere easy to access (e.g. your home directory)
cp -r /usr/local/Cellar/phantomjs/2.1.1/share/phantomjs/examples ~/
(~/ is a shortcut to your home directory; you could use the Finder to the examples directory to your home directory)
changing to that directory in Terminal
cd ~/examples
and then running
phantomjs hello.js
I am trying to install Yii framework via archive file in Windows 7...after downloading the file I tried extracting it into a folder in my C:\wamp\www\bid location, however, I encounter an error saying this:
! C:\wamp\www\bid\yii-basic-app-2.0.2.tgz: Cannot create symbolic link C:\wamp\www\bid\basic\vendor\bin\markdown
A required privilege is not held by the client.
! C:\wamp\www\bid\yii-basic-app-2.0.2.tgz: Cannot create symbolic link C:\wamp\www\bid\basic\vendor\bin\yii
A required privilege is not held by the client.
I thought that perhaps Winrar can't extract tgz files so I downloaded 7-zip...Using 7-zip it extracted into a tar file and the tar file was extracted with no errors...For some reason though I do not seem to have the framework folder that seem to be in other people's directory structure...Moreover after trying create my own framework folder and performing this command:
yiic webapp C:\wamp\www\bid
It states that yiic is not recognized as an internal or external command
Can someone tell me what I'm doing wrong...I've tried setting this up numerous times and failed
You need to run 7-Zip File Manager in administrator mode.
Right-click the icon of 7-Zip File Manager, and then click "Run as administrator".
you need to call the command with php since it is actually a external command, i do it like this
php ./yiic webapp NameOfApp
This way your terminal understand that yii is a program that runs with php.
Another solution is to add the yii path to your environmental variable, regards
I want to change the build dir of team city build agent to:
E://MY_PROJECT_SVN
While installing the build agent I set the same but it diaplays C://buildAgent/work in TeamCity web ui due to which my build fails.
My buildAgent.properties file shows
workDir=E\:\\MY_PROJECT_SVN
And buildAgent.dist.properties file shows
workDir=E://MY_PROJECT_SVN
But I get following error when I run team city
Failed to start MSBuild.exe. Failed to find project file at path:
C:\BuildAgent\work\3ac16e0b4e3af05b\Modules\SIM5.sln
Because of wrong working dir
The buildAgent.dist.properties is indeed just an example, but the solution is something you almost had; you need to put this into the buildAgent.properties:
workDir=E:/MY_PROJECT_SVN
Update:
It should be noted that on TeamCity 7.0 the workDir seemingly can't be on a separate disk; it runs most of the way through the build and then fails. However, using a junction to point from the local (default) folder to the E: drive will work. The tempDir can be pointed to a remote disk though.
The file buildAgent.dist.properties is not used, it is just an example. So don't worry about the contents of that file.
What you have set in buildAgent.properties is what matters. What is happening for you is the agent is reverting to the default location for the working directory.
This means that for some reason it is not able to read or parse the buildAgent.properties file. Make 100% certain that the entire file has no errors in it.
https://confluence.jetbrains.com/display/TCD8/Build+Agent+Configuration
Making any change to this file and saving it should cause the build agent to reboot automatically and reload the new config once it has restarted.
http://blog.jetbrains.com/teamcity/2007/10/configuration-files-editing-without-teamcity-restart/
To build on paul-f-wood's answer:
Teamcity 9.1.6 also has the "feature" where the work directory cannot be on a different drive. I tried several permutations of the temp and work dir, and the only ones that stuck were with the work dir on the same drive as the root teamcity folder. However as paul said, using a junction works like a charm.
cmd: rm C:\BuildAgent\work
cmd: mklink /J C:\BuildAgent\work E:\MY_PROJECT_SVN
When I got some PyCharm project from my colleague I saw some backup files of *.py files.
This files have types: *.___jb_old___ and *.___jb_bak___.
I open the files in Notepad++ and see that these are identical backup files of the corresponding *.py files.
I asked my colleague, but he didn't know what these are.
Why are there TWO identical backup files for each *.py file?
How can I tune PyCharm? We want to turn off this backup.
Google gave me nothing :(
You can disable "safe write"
Use "safe write" (save changes to a temporary file first) If this
check box is selected, a changed file will be first saved to a
temporary file; if the save operation is completed successfully, the
original file is deleted, and the temporary file is renamed.
https://www.jetbrains.com/webstorm/help/system-settings.html
i had this problem in webstorm when a script file was running and i was editing it in webstorm. when i stopped the script and edited it everything was fine
it's a temporary file used by PyCharm to make sure you change will not be lost when editing files. it's safe to delete them manually, you will only loss very recent changes. IntelliJ IDEA works the same as PyCharm.
How to delete them?
To delete a file on a file system requires two things: 1)you have the permission. 2)no program is using it.
so make sure you have 'w' the permission, and stop all program which is using it. then you can remove it.
How to know which program is using it?
Normally you should already know it. but sometimes some background programs(like crash plan, google drive sync, e.g.) may also hold it quietly, then find and kill all programs may be very tricky. the easiest way is reboot your computer with 'safe mode', in which only the OS kernel is loaded.
I spend two hours to figure out the reason why I cannot delete the temp file even when I have whole permission. a crash plan service is holding it in background. This may not be your issue, but if you cannot delete the temp file, this will save your time.
While JeremyWeir's solution probably does work, the real fix - imo - is to enable write permission on the directory.
Saving a file would only need write permission to that file itself. But with the "safe write", you need permission to create the file and rename it - which means you need write access to the directory.
In Linux this would be e.g. chmod ug+w DIR, if you want to give write access to user and group.
I have exact same issue with PhpStorm after system crash. The fix I found was to manualy delete *._jb_old_ and *._jb_bak_ files and reinstall PhpStorm