I'm trying to make an HTA on a very old Windows XP with IE8. I made an error in the program (which I've corrected since) and I accidentally checked the box "do not show this kind of message again" and now if I make an error it doesn't tell me. How do I reactivate error messages?
As before ppl said Internet Explorer should do the trick as that is the engine you are using.
Go to Internet Explorer (11) Settings, Advanced Tab, Reset Internet Explorer.
Apply and test your HTA.
Just had the same problem and I just solved it :)
Related
When I first launched Bixby Developer Studio, it greeted me with a startup screen with a Login button. I clicked on it and it opened a login page in my browser. I logged in that page using my Samsung developer account. The login was successful and a pop-up appeared asking me if I will allow the page to launch Developer Studio (which was already open at that point). I allowed it, but nothing happened; Developer Studio was still showing the startup screen.
I restarted the application but it again showed me that startup screen with the login button. If I click on the login button, it will just take me again to the login page in the browser. And then nothing would happen if I login again.
I'd suggest verifying if your browser is configured to accept cookies. If that information is verified and the problem still exists, there might be additional information in the ide.log file that can provide more insight
To get that information, follow these steps:
Note the time when you begin the next steps.
Go through the login process until you hit the point of failure.
From the IDE menu, click on Help -> Create Diagnostics Report. This
will popup a dialog that will point you to the location of the
diagnostics report, by default this location is
C:\Users\'User'\bixby-workspace\
Unzip the diagnostics report and look at the ide.log file for any
errors at the time of login.
Feel free to post the errors here or if you prefer, you can open a ticket with Bixby Support too.
There are a couple of points you could work on here -
In this case, I suggest you to keep the browser open in the background while clicking on the login button. I was facing the same issue and somehow it worked for me like this. This has been an issue on a Windows machine. On a Mac this problem is not faced till now.
You could restart the Bixby studio itself for logging in again.
Also, I suggest removing the browser cookies as told by shahnawaz above.
Do let us know if this still persists !
Thank you all for your suggestions. For some reason, it just started working right after I received dozens of Windows updates (it's been a few days since I logged in to my Windows account as I have been using Linux; I rarely use my Windows account now and I wish Bixby Studio was available in Linux too). So, I actually haven't tried any of your suggestions yet. Thanks again, anyways!
Yesterday I upgraded from win 8.1 to win 10. In Outlook 2013 under win 8.1 I had a VBA script (macro) which was automatically adding BCC to every mail I have sent. This script was digitally signed so that I can have the Macro setting like this: "Notifications for digitally signed macros, all other macros disabled" without asking me to enable this macro every time I start the Outlook. Now it doesn't work any more. The script is working well if I set this macro security setting to: "Enable all macros" - but I don't want to use this setting because of security reasons.
So obviously the problem is somewhere in digital signing of the VBA script. I did it all from the beginning: I removed the previous certificate, created new one using the SELFCERT.EXE, and did all the procedure like with win 8.1 and everything went well like described here except that part in which it should ask only for the first time if I trust the publisher and I should check "always trust macros from this publisher". I cannot invoke this window. Maybe this points out to some problem or inconsistency: it should show this window for me to check it but is not showing because I previously under win 8.1 already have checked it...?
Has anybody some idea how to solve this?
Thanks!
I got it finally!
The only thing I had to do was to run Outlook as administrator. As soon as I did that, the window with "trust all documents from this publisher" appeared and after I clicked it everything after that worked like before.
I had the same issue after upgrading from Windows 7 x32 to Windows 10 but with Outlook 2010 rather than 2013. Tried all sorts of thing without success.
What eventually worked for me was to go into the Trust Center, Macro Settings, and check the box "Apply macro security settings to installed add-ins" as well as the 'Notifications for digitally signed macros' option.
The 'Disable all macros' option gets greyed out.
Click OK and exit Outlook.
Next time you open Outlook you will be asked to accept each of the installed add-ins as well as your self-certified VBA project - but this is a one-time requirement. As belt and braces I allowed it to install the certificates automatically. In my case at least, from then on all my macros ran normally :-)
Hope that helps!
I realize this thread is dated, but I discovered the reason Bzek's solution worked. I don't want to run Outlook as an Administrator, but I also did want my macros to function as they had in W7. The potential solution from Kopweb didn't work for me.
The good news is that a simple check box click in the Advanced section of the Cert properties for 'client authentication' did the trick. Restart Outlook normally and the macros should work. See the image below:
Cert - Advanced Options
I upgraded IE on my machine and found the upgraded developer tools better. However whenever I select the Network tab, IE hangs or freezes. I can do nothing on it.
Is there some setting that I might be missing to get it to work?
There is an entry in Microsoft Connect database for that. Unfortunately, there is no fix for now...
http://connect.microsoft.com/IE/feedback/details/801628/ie11-developer-tools-network-tab-causes-freeze
My work around is to start IE with just a blank new tab. I turn on Network and then navigate to wherever I need to do my work. So far I've been lock up free when doing this.
Extensively used IE9 Developer Tools and I just updated to IE11 "11.0.2" and the Developer Tools are garbage.
My Network and Profile Tabs are blank.
Is there a "special" setting that I'm missing in order to enable them, or could there be a specific windows hot fix between the IE11 RTM and 11.0.2 that I may be missing?
I had the same problem (version 11.0.9600.17633) on WIN7
Only on one of 4 accounts. Reinstalling IE11, etc did not help.
With regedit, I renamed HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer
to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer Old
I logged off, then logged on again and started Internet Explorer. This recreated the key. The network tab and profiler tab are no longer blank. Internet Explorer settings have been lost however. I assume the settings and state of Internet Explorer are the same as just after creating a new account.
The network tab was not working for me on Windows 10 Creators Update (Version 1703 OS Build 150063.540) in IE OR Edge.
After trying the various registry changes mentioned by others without success, I removed Internet Explorer as a Window Feature (Control Panel > Programs and Features > Turn Windows Features on or off).
I rebooted and opened Edge and the network tab was working again.
Then I went back into Programs and Feature and added IE back as in installed feature. I rebooted and now the network tab is working in both IE and Edge.
To make blank Network Panel/Profiler Panel appear again(also pin F12 developer tool not working either), delete the following registry DWORD key:
HKEY_CURRENT_USER\Software\Microsoft\Internet
Explorer\Main\TabProcGrowth
This key could be recreated automatically.
I still have this problem using IE 11.0.9600.18097 on Win 7 [Version 6.1.7601]. I post my solution here in case someone faces the same situation like me, that your company doesn't allow updating IE on your own. My
Possible related issue tracker:
https://connect.microsoft.com/IE/feedback/details/808417/ie-11-win-7-developer-tools-does-not-pin
Here is the solution: install the following patch from Microsoft and restart your computer:
https://www.microsoft.com/en-us/download/details.aspx?id=46507
This helped me for IE 11, Windows 10:
sc config diagnosticshub.standardcollector.service start=demand
(see https://www.systemcamp.com/network-collection-agent-failed-to-start-in-ie-11-or-edge/)
It's definitely worth getting the latest updates.
There shouldn't be any special settings. The only special/different thing about the network and profiler tools are the two tools that weren't rebuilt in IE11 and were just themed. However they should most definitely work just fine. Though there are some timing bugs that can cause the tools to hang and crash :(. But, that doesn't seem to be happening for you.
I'm a bit of a loss as to make recommendations on how to fix the issue as we've not seen the issue before (I work on the F12 tools at Microsoft).
If you try a different user account does the same issue happen? Is it happening on all your machines or just one? Does it happen on all pages or just some? (try both an intranet and internet site.)
I created a new local account, logged into that account and that solved this problem for me. All of the tabs in the developer tools work and I can now dock the developer tools as well which I could never do before.
more info:
Not sure if this is the full answer but this appears to be related to settings on your computer more then IE itself. For whatever reason I could not change visual settings or apply themes or change the desktop wallpaper. I followed all the online setting changes for fixing those things. Basically it can be setting changes in group policies/registry settings that disable this. However I'm pretty sure at one point I had a virus on my computer and that destroyed my settings so there was no real undoing of all the damage that it had done. So creating a new account was my only answer.
I doubt this would fix the issue but just to make sure it is not being caused by an extension have you tried running IE without extensions?
from run: iexplore.exe -extoff
This happened to me and the answer was that my machine (win8.1) wasn't being patched per the group policy since the rest of the company's on win7 and the patches are controlled.
When I forced the update-- there's a link on the windows update dialog box that says "Check online for updates from Microsoft Update". I got a gig a of stuff to dl and installed it and we were fine after that.
NOTHING until then- wiping bits of the registry, uninstall ie11, reinstall, etc, worked.
Change the value data in DWORD "TabProcGrowth" that located in "HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main" to 1. close and open IE11 .
For me, Network tab stopped working one day and following worked:
Restart Microsoft (R) Diagnostics Hub Standard Collector Service
Just close IE11 and all its tabs and reopen
I installed Microsoft SharePoint and Project PWA on Windows Server 2008 R2.
When I want to open Library in Windows Explorer, I randomly get an error:
Your client does not support opening this list with Windows Explorer
When I open IE it's working for 1st and 2nd time, but after some clicks it's not working anymore and I need to restart IE and then it normally works for couple of times.
When it not working through Sharepoint it also not works via \server\DavWWWRoot\PWA and oposite.
I'm searching through the web for weeks and didn't find any solution.
Do you have any idea what should be wrong here. Any suggestion is welcome :)
I had the same exact issue with Windows 7 and explorer view. The following steps resolved the issue for me:
First - be sure that the Web Client service is running (run>services.msc).
Next - In I.E. check Tools>Internet Options>Security>Local Intranet>Sites>Advanced and add the site that you want to use explorer view with.
This finally fixed it for me. I hope that you have already found a solution to this issue! I was surprised at how difficult it was to find a solution to this problem!
This error message is a symptom to a billion different problems.
I solved this problem when I realized my XP32 box could do this just fine with IE8. So I reverted to IE8 in 7x64 (you have to do it by uninstalling updates for IE until you're back at 8) and it didn't work. The build versions were different and on the 7x64 "about" box it said IE8 was using 256-bit cipher while in XP32 it had 128-bit. That to me was a hint that there may be 64-bit issues even when you run the 32-bit executable.
Then I found this hotfix so I reinstalled the windows update for IE10 and then installed this hotfix. Now I'm able to open the TeamCenter site in question in windows Explorer. IE10 reports it's version 10.0.9200.16686. I cannot guarantee that it was the hotfix alone (and not also the reinstallation of IE10) which fixed it. But I'm willing to bet it was the hotfix alone.
In XP I found it impossible to then map this network location to a drive letter, as mapping doesn't like URL's. However in Windows 7 you can transform the URL so that it is interpreted as a Windows share. If the URL of a given folder is of this form:
https://somesharepoint.com/folder1/folder2/folder3
you can also access it as
\\somesharepoint.com#SSL\DavWWWRoot\folder1\folder2\folder3
and, in this form, it can be mapped to a drive letter.
I do have issues at that point that even with IE10 open and logged in to the site I see some random time-out like problems and I get kicked off (and prompted to log in again in IE10). My situation is complicated because the site I'm accessing requires an Exostar token to log in, so I have to log in via website no matter what.
If it helps any one do the steps suggested above:
Make sure to use 32 bit internet explorer (program files (x86)/internet explorer).
Like was mentioned above Web client must be started.
You may also need to add your site to trusted sites in internet explorer.
Make sure enabled protected mode in internet options is disabled.
This is what finally fixed it for me: Check "Keep me signed in" on the login page. This was the key for me. Will not work without it checked in my case.
I had the same symptoms, and it turned out I don't have a root site collection. Creating one solved this for me.
Summarized the troubleshooting steps here:
http://letitknow.wordpress.com/2012/07/22/your-client-does-not-support-opening-this-list-with-windows-explorer-error/
There can be multiple reasons for it.
One could be using IE x64 version. It won't work there.
Secondly, check out this blog:
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
I experienced the same problem as well.
And I found out that if none of the above options are working, and if you work in an organisation, maybe the proxy is blocking the "Open with Explorer" option.
I did the same, and removed the proxy and it worked just fine.
this fixed it for me ( however in windows server 2008 you may need to install desktop experience i think its called)
After you log into windows go into services then restart the WebClient then see if you can use explorer view without the error " your client does not support. blah blah blah" if it does work then. make a batch file that says:
net stop webclient
net start webclient
then make a scheduled tasks that runs that batch file at start up. Have it run as a user with administrative rights, make sure you tell it to run even if user is not logged in. it should prompt you for the password of the admin account you selected. this worked for me with windows 7.
I found online where the error can occur intermittently with SharePoint 2010, however I think the SharePoint version is irrelevant. They said the client polls for a SharePoint root site and that the error occurs if one isn't found.
We have not seen the error since I created a root site even though we’re only using WSS3. Our errors began when we changed clients to Windows 7. So in our case it sounds like the issue could be the root site polling due to an IE8 security change in Windows 7.
SOLUTION:
*you on x64 bit machine* so solution is that there is no problem but you are using the wrong IE shortcut.
There are different IE types you can use (just type Internet Explorer in start search bar) and you will see..
Internet Explorer (64-bit) - won't show any sharepoint add-ons
Internet Explorer (No Add-ons) - won't show any sharepoint add-ons
Internet Explorer - only this will show sharepoint add-ons and will
work so basically make sure you always use this version of IE