I'm trying to install ruby-1.9.3-p194 using RVM and it is failing. It looks like the reason is that it is trying to download the source from bad urls. The output I get is:
% rvm install ruby-1.9.3-p194
Searching for binary rubies, this might take some time.
No binary rubies available for: osx/10.10/x86_64/ruby-1.9.3-p194.
Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
Checking requirements for osx.
Certificates in '/usr/local/etc/openssl/cert.pem' are already up to date.
Requirements installation successful.
Installing Ruby from source to: /Users/robertlooby/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)...
ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (22) The requested URL returned error: 404 Not Found
The requested url does not exist(22): 'http://cache.ruby-lang.org/pub/ruby/./ruby-1.9.3-p194.tar.bz2'
Checking fallback: http://ftp.ruby-lang.org/pub/ruby/./ruby-1.9.3-p194.tar.bz2
Checking fallback: http://www.mirrorservice.org/sites/ftp.ruby-lang.org/pub/ruby/./ruby-1.9.3-p194.tar.bz2
No fallback URL could be found, try increasing timeout with:
echo "export rvm_max_time_flag=20" >> ~/.rvmrc
There has been an error fetching the ruby interpreter. Halting the installation.
In each of the requested URLs where it has /./ it should have /1.9/. Any idea how to fix this or what is causing it?
I am using version 1.26.4 of RVM
Related
I'm trying to install the binaries for Hyperledger fabric but I run into an error.
curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.
I do know this means i need to put -k or --insecure in the curl statment. However I am doing so and it doesn't work.
curl --insecure -sSL https://raw.githubusercontent.com/hyperledger/fabric/master/scripts/bootstrap.sh | bash -s 2.3.0 1.4.9
when I run this the first half is fine, the hyperledger/fabric-samples repo clone will succeed.
Here is the entire output
\Clone hyperledger/fabric-samples repo
===> Cloning hyperledger/fabric-samples repo
Cloning into 'fabric-samples'...
remote: Enumerating objects: 20, done.
remote: Counting objects: 100% (20/20), done.
remote: Compressing objects: 100% (18/18), done.
remote: Total 7386 (delta 2), reused 8 (delta 0), pack-reused 7366
Receiving objects: 100% (7386/7386), 4.26 MiB | 905.00 KiB/s, done.
Resolving deltas: 100% (3823/3823), done.
===> Checking out v2.3.0 of hyperledger/fabric-samples
Pull Hyperledger Fabric binaries
===> Downloading version 2.3.0 platform specific fabric binaries
===> Downloading: https://github.com/hyperledger/fabric/releases/download/v2.3.0/hyperledger-fabric-windows-amd64-2.3.0.tar.gz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.se/docs/sslcerts.html
curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error is not recoverable: exiting now
==> There was an error downloading the binary file.
------> 2.3.0 platform specific fabric binary is not available to download <----
I am still a student so it could easily be a stupid problem, but I'm really stuck. So please can someone help me?
So, the problem was -k/--insecure was not good enough i had to change it for all connections with :
echo insecure >> ~/.curlrc
conda install xxx fails with the following error:
SSLError(MaxRetryError('HTTPSConnectionPool(host=\'repo.anaconda.com\',
port=443): Max retries exceeded with url:
/pkgs/main/win-64/current_repodata.json (Caused by
SSLError(SSLError("bad handshake: Error([(\'SSL routines\',
\'tls_process_server_certificate\', \'certificate verify
failed\')])")))'))
Maybe there must be something very subtle causing the trouble in my environment but I really have no idea.
It used to work but after I reinstall Windows 10 image, the issue began to appear.
It is on Windows 10. Conda version is 4.7.12. My .condarc is placed in %USERPROFILE% and looks like:
channels:
- defaults
show_channel_urls: true
allow_other_channels: true
proxy_servers:
https: https://x.x.x.x:8080
ssl_verify: false
All available advice over the Internet for the above error tell that ssl_verify set to false is enough.
Where else should I take a look into?
EDIT:
I found some useful info at:
https://stackoverflow.com/a/56717433/7341479
It solves the issue for running conda install Anaconda Powershell opened in Admin. but it still remains for when I run pkg build PyCall in Julia
I did a apt-get upgrade because the load times of our production server were about 40 seconds. I don't have a snapshot before nor after the upgrade.(Although there is a snapshot of six months old) Load times improved to 15-ish seconds but our erizo service stopped working. Erizo was also running on that instance. Restarting the services didn't help so I tried upgrading the packages to the previous version (https://askubuntu.com/questions/138284/how-to-downgrade-a-package-via-apt-get), just like it was but on almost every package there was an error: the previous package version did not excist.(which is strange, because I copied the output of dpkg -l)
Only a few of them were successfully downgraded but I got a serious error when upgrading e1fslibs to it's previous version.:The following packages have unmet dependencies:
e2fsprogs: PreDepends: e2fslibs
Somehow that messed up initramfs and/or initramfs-tools and now the instance is running but I can't get into it.
Connecting to the instance in google cloud platform :Connecting...
Could not connect, retrying (1/3).
google cloud shell isn't able to gcloud compute ssh : Permission denied (publickey).
using gcloud locally also says Permission denied (publickey).
I checked the following:
There are project public keys defined; there aren't any instance public keys defined or any other metadata ( Google Cloud SSH Keys )
In google cloud platform >> compute engine >> VM instances >> permissions>> I see 'compute' is disabled
verify that the daemon is running by navigating to the serial console output page and looking for output lines prefixed with the accounts-from-metadata: string. If you are using a standard image but you do not see these output prefixes in the serial console output, the daemon might be stopped--> I don't see this so I expect it's NOT running.
check firewall rules:(gcloud compute firewall-rules list)
default-allow-ssh default 0.0.0.0/0 tcp:22 //rule is present
Following packages were upgraded:
apt
apt-transport-https
apt-utils
binutils
cloud-init
cloud-initramfs-growroot
cloud-initramfs-rescuevol
comerr-dev
dosfstools
e2fslibs
e2fsprogs
gce-cloud-config
gce-daemon
gce-imagebundle
gce-startup-scripts
google-cloud-sdk
landscape-client
landscape-common l
ibapt-inst1.4 libapt-pkg4.12
libcomerr2
libss2
libudev0 mountall
nginx
nginx-common
nginx-full
ntp
ntpdate
procps
python-apt
python-apt-common
python-lazr.restfulclient
udev
unattended-upgrades
update-manager-core
upstart
whoopsie
x11-utils
This is get from the serial output ::
- mountall: Event failed
- landscape-client is not configured, please run landscape-config.
What to do next?
Apply a startup script to running instance (following this https://cloud.google.com/compute/docs/startupscript) and try to perform Apt-get upgrade ?
try to create a new public key (again) in google cloud shell to access the instance?
In google cloud shell the first time this file was generated after typing gcloud compute --project "enduring-palace-762" ssh --zone "europe-west1-c" "tta-media-test-2"
WARNING: The private SSH key file for Google Compute Engine does not exist.WARNING: You do not have an SSH key for Google Compute Engine.WARNING: [/usr/bin/ssh-keygen] will be executed to generate a key. This tool needs to create the directory /home/developer/.ssh
the generated public key was stored in /home/developer/.ssh /google_compute_engine.pub I made a copy of that, prepended the username and added the content of the public key to compute engine >> metadata>>ssh keys. *key is accepted but the username doesn't show like it does with all the other username - key pairs
I get Permission denied (publickey) error though when using gcloud compute ssh tta-media-test-2 --zone europe-west1-c
When I provide the ssh key file like this
gcloud compute ssh tta-media-test-2 --zone europe-west1-c --ssh-key-file=my-ssh-keys_copy.pub (pwd is inside the folder where key file is)
WARNING: The public SSH key file for Google Compute Engine does not exist.
WARNING: You do not have an SSH key for Google Compute Engine.
WARNING: [/usr/bin/ssh-keygen] will be executed to generate a key.
I get same result when i generate a new key with ssh-keygen -t rsa -f my-ssh-keys
Any other possible solution would be much appreciated.
[update] I am able to ssh the 'broken' instance from local using ssh user#externalIpOfInstance My plan is to bring it to a upgraded stable state, create a snapshot and see from there..
sudo apt-get -f install
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up initramfs-tools (0.99ubuntu13.5) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.13.0-79-generic
E: /usr/share/initramfs-tools/hooks/fixrtc failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.13.0-79-generic with 1.
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
google-chrome-stable
The following packages will be upgraded:
comerr-dev libcomerr2 libss2 unattended-upgrades
4 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 0 B/188 kB of archives.
After this operation, 4,096 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Preconfiguring packages ...
(Reading database ... 178509 files and directories currently installed.)
Preparing to replace comerr-dev 2.1-1.42-1ubuntu2.2 (using .../comerr-dev_2.1-1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement comerr-dev ...
Preparing to replace libcomerr2 1.42-1ubuntu2.2 (using .../libcomerr2_1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Preparing to replace libss2 1.42-1ubuntu2.2 (using .../libss2_1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement libss2 ...
Preparing to replace unattended-upgrades 0.76ubuntu1.1 (using .../unattended-upgrades_0.76ubuntu1.2_all.deb) ...
Unpacking replacement unattended-upgrades ...
Processing triggers for install-info ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up initramfs-tools (0.99ubuntu13.5) ...
update-initramfs: deferring update (trigger activated)
Setting up libcomerr2 (1.42-1ubuntu2.3) ...
Setting up comerr-dev (2.1-1.42-1ubuntu2.3) ...
Setting up libss2 (1.42-1ubuntu2.3) ...
Setting up unattended-upgrades (0.76ubuntu1.2) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.13.0-79-generic
E: /usr/share/initramfs-tools/hooks/fixrtc failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.13.0-79-generic with 1.
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Errors were encountered while processing:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get remove initramfs-tools-bin
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
cron : Depends: adduser but it is not going to be installed
procps : Depends: initscripts
upstart : Depends: initscripts
Depends: mountall
Depends: ifupdown (>= 0.6.10ubuntu5)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
what to do here?
If you were able to SSH into the instance using a given SSH key before, the most likely reason it would stop working is if you somehow removed that SSH key or if the SSH daemon wasn't running/was otherwise broken. It appears as though in the downgrade you broke this machine.
Why do you need this particular VM instance? Does it have important data? If so, you can shut it off, mount its disk using a fresh VM instance, and copy that data off.
If it runs a service, you should probably cut over to a new machine: even if you're able to get into the instance, there's no telling what still works and what doesn't.
i'm facing issue in bigbluebutton insatllation
Reading state information...
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
bigbluebutton : Depends: bbb-config but it is not going to be installed
gce-compute-image-packages : Depends: google-compute-engine but it is not going to be installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
I recently uploaded a new cocoapod of mine, and I was trying to test it. But when I opened up .xcworkspace and ran it...I got an error:
".../APMultiMenu.bundle" failed: No such file or directory (2)
done
sent 29 bytes received 20 bytes 98.00 bytes/sec
total size is 0 speedup is 0.00
rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-42/rsync/main.c(992) [sender=2.6.9]
Command /bin/sh failed with exit code 23
Also I noticed in my Products folder (under Pods), it says there is a file APMultiMenu.bundle, but it is red so it is missing. But what I dont understand is why the .bundle file is even there, because it should not be there? Can someone help
I installed RVM using the command curl -L get.rvm.io | bash -s stable and I got all listed Rubies successfully. When I am trying to install readline package using the command rvm package install readline I am getting the following status:
TEST:software sailakshmi$ rvm pkg install readline
Beware, 'rvm pkg ...' is deprecated, read about the new autolibs feature: 'rvm help autolibs'.
Checking requirements for osx.
Installing macports
..............................................................................................................................................................................................................................................................................................................................
sailakshmi password required for 'make install':
.............................................................................................................................................................................................................................................
Installing requirements for osx.
Updating system...................................................
Installing required packages: autoconf, automake, libtool, pkgconfig, libiconv, libyaml, libffi, readline, libksba, openssl, curl-ca-bundle, sqlite3, zlib, gdbm, ncurses
..............................................................................................................................................................................................................................................................................................................................................................................................................
Certificates in '/opt/local/etc/openssl/cert.pem' already are up to date.
Requirements installation successful.
Fetching readline-5.2.tar.gz to /Users/sailakshmi/.rvm/archives
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1989k 100 1989k 0 0 107k 0 0:00:18 0:00:18 --:--:-- 119k
Extracting readline to /Users/sailakshmi/.rvm/src/readline-5.2
Applying patch '/Users/sailakshmi/.rvm/patches/readline-5.2/shobj-conf.patch'....
Prepare readline in /Users/sailakshmi/.rvm/src/readline-5.2 .............................
Error running '__rvm_autoreconf -is --force',
please read /Users/sailakshmi/.rvm/log/1384489495/readline_autoreconf.log
Configuring readline in /Users/sailakshmi/.rvm/src/readline-5.2
.......................................................................................................................................................................
Compiling readline in /Users/sailakshmi/.rvm/src/readline-5.2
...........................................................................................................................................................................................................................................
Installing readline to /Users/sailakshmi/.rvm/usr .............................................................................
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Fetching readline-6.2.tar.gz to /Users/sailakshmi/.rvm/archives
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2224k 100 2224k 0 0 188k 0 0:00:11 0:00:11 --:--:-- 334k
Extracting readline to /Users/sailakshmi/.rvm/src/readline-6.2
Applying patch '/Users/sailakshmi/.rvm/patches/readline-6.2/patch-shobj-conf.diff'....
Prepare readline in /Users/sailakshmi/.rvm/src/readline-6.2
...............................
Error running '__rvm_autoreconf -is --force',
please read /Users/sailakshmi/.rvm/log/1384489495/readline_autoreconf.log
Configuring readline in /Users/sailakshmi/.rvm/src/readline-6.2
................................................................................................................................
Compiling readline in /Users/sailakshmi/.rvm/src/readline-6.2
......................................................................................................................................................................................................................................................................
Installing readline to /Users/sailakshmi/.rvm/usr ..................................................................
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
please help me out here Error running '__rvm_autoreconf -is --force'
you do not need to install the rvm readline package, new rvm detects your package manager and installs readline for you before installing ruby so ruby should be working fine with readling - if it does not open a bug report here => https://github.com/wayneeseguin/rvm/issues
if you want to pursue the problem with readline compilation please also open a bug including /Users/sailakshmi/.rvm/log/1384489495/readline_autoreconf.log and /Users/sailakshmi/.rvm/log/1384489495/readline_autoreconf.log - but those did not break anything installation continued without any other problems.