I have been calculating different integer percentages with different numbers but each time I get floor rounded number. select 13*100/60 gives me 21 and the actual number is 21.66 which using a round function should give us 22 but it can only give me 21 for all different decimal numbers.
I am using SQL 2017. please help
This is due to the fact that you are dividing ints and not floating-point numbers. Integer division returns an integer.
Try the following instead (noting the .0 on the end of the 60):
SELECT 13 * 100 / 60.0
Making one of the components a floating-point number will automatically output the result as a floating-point number.
Output:
21.666666
Incidentally, if you are working with variables and one of them is a FLOAT, it will automatically produce the output you expect:
DECLARE #A FLOAT
DECLARE #B INT
DECLARE #C INT
SET #A = 13
SET #B = 100
SET #C = 60
SELECT #A * #B / #C
Output:
21.6666666666667
I am trying to get remainder part from a decimal number. I have used PARSENAME function like:
DECLARE #Total decimal(7,2) = 1000.40;
DECLARE #Remainder int = 0;
SET #Remainder = PARSENAME(#Total, 1)
It is returning integer form of the decimal portion like 40. How can I get the remainder in decimal form like 0.40. Because I have to store the remainder value as a decimal.
Thanks
Partha
The mod function in SQL Server is % and anything MOD 1 is just the decimal remainder.
SELECT DecimalPortion = 1000.40 % 1
DECLARE #Total decimal(7,2) = 1000.40
DECLARE #Remainder decimal(2,2)
SET #Remainder = #Total - FLOOR(#Total)
SELECT #Remainder
simply subtracting the FLOOR of the input variable will give you the decimal portion
also per Tab's comment you do have the wrong data type for the #Remainder it should be a decimal. If you want it as an integer there are some other methods of accomplishing that too.
DECLARE #a int;
DECLARE #b int;
SET #a = 9;
SET #b = 2;
SELECT CEILING (#a/#b);
It is returning as 4 instead of 5. Why?
Edit: I would like to get next smallest integer if the quotient is not whole number.
Try:
SELECT CEILING (#a/CAST(#b AS float))
And consider NULLIF(#b,0) too, to avoid a Division By Zero error.
After dividing 9 by 2 a decimal fraction is Truncated to its integer part - 4, not Rounded to 5. Try:
SELECT 9/2
Resilt is 4. Then CEILING(4) = 4
To get next integer declare variables as data types that can handle decimal part: NUMERIC,FLOAT, REAL.
SQL Server does integer division. So 9/2 = 4 in SQL Server.
Taking the ceiling of an integer is the same integer.
I am getting result as decimal in stored procedure. If I am getting result as 123.45,
I want to split it into 123 and 45. Can anybody help?
use SQL function FLOOR() for getting integer part
and subtract that from the original for the decimal part
You can also make use of ROUND instead of FLOOR.
See section C. Using ROUND to truncate for trucate, and then subtract that from the original.
Be aware that using FLOOR on negative numbers might not give you the required result.
Have a look at this example
DECLARE #Dec DECIMAL(12,8)
SET #Dec = -123.45
SELECT FLOOR(#DEc)
select round(#Dec, 0, 1)
try this;
DECLARE #result DECIMAL(8,2) = 123.45
SELECT CAST(round(#result,0) AS FLOAT)
SELECT REPLACE(#result % 1 ,'0.','')
OR
DECLARE #result decimal(8,2) = 123.45
select PARSENAME(#result, 2) AS LeftSideValue, PARSENAME(#result, 1) AS RightSideValue
I'm trying to determine the best way to truncate or drop extra decimal places in SQL without rounding. For example:
declare #value decimal(18,2)
set #value = 123.456
This will automatically round #value to be 123.46, which is good in most cases. However, for this project, I don't need that. Is there a simple way to truncate the decimals I don't need? I know I can use the left() function and convert back to a decimal. Are there any other ways?
ROUND ( 123.456 , 2 , 1 )
When the third parameter != 0 it truncates rather than rounds.
Syntax
ROUND ( numeric_expression , length [ ,function ] )
Arguments
numeric_expression
Is an expression of the exact numeric or approximate numeric data
type category, except for the bit data type.
length
Is the precision to which numeric_expression is to be rounded. length must be an expression of type tinyint, smallint, or int. When length is a positive number, numeric_expression is rounded to the number of decimal positions specified by length. When length is a negative number, numeric_expression is rounded on the left side of the decimal point, as specified by length.
function
Is the type of operation to perform. function must be tinyint, smallint, or int. When function is omitted or has a value of 0 (default), numeric_expression is rounded. When a value other than 0 is specified, numeric_expression is truncated.
select round(123.456, 2, 1)
SELECT Cast(Round(123.456,2,1) as decimal(18,2))
Here's the way I was able to truncate and not round:
select 100.0019-(100.0019%.001)
returns 100.0010
And your example:
select 123.456-(123.456%.001)
returns 123.450
Now if you want to get rid of the ending zero, simply cast it:
select cast((123.456-(123.456%.001)) as decimal (18,2))
returns 123.45
Actually whatever the third parameter is, 0 or 1 or 2, it will not round your value.
CAST(ROUND(10.0055,2,0) AS NUMERIC(10,2))
Do you want the decimal or not?
If not, use
select ceiling(#value),floor(#value)
If you do it with 0 then do a round:
select round(#value,2)
Another truncate with no rounding solution and example.
Convert 71.950005666 to a single decimal place number (71.9)
1) 71.950005666 * 10.0 = 719.50005666
2) Floor(719.50005666) = 719.0
3) 719.0 / 10.0 = 71.9
select Floor(71.950005666 * 10.0) / 10.0
Round has an optional parameter
Select round(123.456, 2, 1) will = 123.45
Select round(123.456, 2, 0) will = 123.46
ROUND(number, decimals, operation)
number => Required. The number to be rounded
decimals => Required. The number of decimal places to round number to
operation => Optional. If 0, it rounds the result to the number of decimal. If another value than 0, it truncates the result to the number of decimals. Default value is 0
SELECT ROUND(235.415, 2, 1)
will give you 235.410
SELECT ROUND(235.415, 0, 1)
will give you 235.000
But now trimming0 you can use cast
SELECT CAST(ROUND(235.415, 0, 1) AS INT)
will give you 235
This will remove the decimal part of any number
SELECT ROUND(#val,0,1)
SELECT CAST(Value as Decimal(10,2)) FROM TABLE_NAME;
Would give you 2 values after the decimal point. (MS SQL SERVER)
Another way is ODBC TRUNCATE function:
DECLARE #value DECIMAL(18,3) =123.456;
SELECT #value AS val, {fn TRUNCATE(#value, 2)} AS result
LiveDemo
Output:
╔═════════╦═════════╗
║ val ║ result ║
╠═════════╬═════════╣
║ 123,456 ║ 123,450 ║
╚═════════╩═════════╝
Remark:
I recommend using built-in ROUND function with 3rd parameter set to 1.
I know this is pretty late but I don't see it as an answer and have been using this trick for years.
Simply subtract .005 from your value and use Round(#num,2).
Your example:
declare #num decimal(9,5) = 123.456
select round(#num-.005,2)
returns 123.45
It will automatically adjust the rounding to the correct value you are looking for.
By the way, are you recreating the program from the movie Office Space?
Try like this:
SELECT cast(round(123.456,2,1) as decimal(18,2))
If you desire to take some number like 89.0904987 and turn it into 89.09 by simply omitting the undesired decimal places, simply use the following:
select cast(yourColumnName as decimal(18,2))
The following screenshot is from W3Schools SQL Data Types section, which describes what decimal(18,2) is doing:
Therefore,
select cast(89.0904987 as decimal(18,2))
gives you: 89.09
Please try to use this code for converting 3 decimal values after a point into 2 decimal places:
declare #val decimal (8, 2)
select #val = 123.456
select #val = #val
select #val
The output is 123.46
I think you want only the decimal value,
in this case you can use the following:
declare #val decimal (8, 3)
SET #val = 123.456
SELECT #val - ROUND(#val,0,1)
I know this question is really old but nobody used sub-strings to round. This as advantage the ability to round really long numbers (limit of your string in SQL server which is usually 8000 characters):
SUBSTRING('123.456', 1, CHARINDEX('.', '123.456') + 2)
I think we can go much easier with simpler example solution found in Hackerrank:
Problem statement: Query the greatest value of the Northern Latitudes
(LAT_N) from STATION that is less than 137.2345. Truncate your answer
to 4 decimal places.
SELECT TRUNCATE(MAX(LAT_N),4)
FROM STATION
WHERE LAT_N < 137.23453;
Solution Above gives you idea how to simply make value limited to 4 decimal points. If you want to lower or upper the numbers after decimal, just change 4 to whatever you want.
Mod(x,1) is the easiest way I think.
select convert(int,#value)