I installed a Ubuntu 14.10 virtual machine on Windows 8.1 using Vmware.
Ubuntu has access to Internet in the NAT mode. But I can't establish a pptp connection to a remote server from Ubuntu. Is this supported?
change to bridged (instead of NAT)
I use VMware with a Macbook. I have found that I can use bridged mode with a hard wired connection. Then the virtual machine reports its own unique MAC address and receives its own IP address. After that PPTP works. No luck with WiFi. It must be adapter dependent, though; since I cannot imagine how it would otherwise be different. It is annoying not to be able to use WiFi for the VPN.
Related
I am working with an Ubuntu 18.04 virtual machine. I can SSH into this machine via puTTy on the same computer. However, how can I access this machine from another computer? Or do I have any option to set this machine as a cloud server so others can access and run it?
I think that would all depend on how the networking is configured on your VM.
You can configure the network as bridged (where the VM has it's own dedicated IP address on the local subnet), NAT (where the VM shares the IP with the system running Workstation, but NAT rules can be configured to handle traffic), or host-only (where only the system running Workstation is able to connect to it).
Bridged is probably the easiest to use for your situation.
More information on these networking configs: Common Networking Configurations for Workstation
I want to access the virtual machine IP in the host (by ping or curl or something), but it is not ok. How could I make it?
The host machine is a win10 PC.
A virtual machine using VMware workstation 15, Ubuntu 16.04 server. It has IP address 192.168.178.138 and 10.0.0.11. I can access the 192.168.178.138, but cannot access 10.0.0.11. (no matter ping or curl...)
All are NAT mode in VMware Workstation.
Now I have a web application running on 10.0.0.11:80. How could I access it in my host machine.
Btw I have another VM with 192.168.178.39 and 10.0.0.31, and this VM can access the 10.0.0.11:80 by curl.
I can show the topo as below.
(A little Chinese but it won't affect reading, just ignore it)
Yes, now I solve this question by myself.
It seems that you cannot use the Host-only mode (Actually I can only use this mode...).
You need to set the virtual interface in your host PC (The IP, gateway, or anything else...);
Then you need to set in the VMWare workstation, set it to use speical lan (VM net 2 for me);
Then you can access it from the host machine and other vm, maybe you need to search something like NAT translation in VMWare workstation to access your web application deployed in the VM from outer network.
That's what I do, now I can access my horizon dashboard in the browser (The Ubuntu server don't have any browser... T-T sad ...)
Settings Picture
I have been trying to setup a Win7 VM on Hyper-v that connects to the internet through my Win 8 host machine.
I can't seem to figure out why the VM can't ever get passed limited connectivity. Any ideas?
NO sure why but all I had to do was Disable/enable the vEthernet adapter and everything worked great!
Check that you have a Virtual Switch with an "External Network" using the Virtual Switch Manager.
The other network types offer VM isolation. If your VM is on an "Private Network" it can only talk to other VMs on the server. The "Internal Network" allows VMs can talk to other VMs and to the host.
In contrast, an External Network allows the VM to contact machines on the network that the host is attached to.
I worked on this issue for a while myself after upgrading to Windows 8.1 and losing connectivity. Added and removed the adapter to no avail. The solution was to upgrade the VM's Integration Services.
I had the same issue because my DHCP settings on my guest VM was setup wrong.
So check the DHCP setting if they are on obtain automatically.
Control Panel\Network and Internet\Network Connections
Network adapter properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties ->
Obtain DNS server address automatically
I have had great success with Hyper-V and windows 8 and windows 10 virtuals using external switches with a Windows 8.1 host. Unfortunately I could not get the external switch to ever work on windows xp virtual running under Hyper-V. Instead, after reading a lot of sites/suggestions, I followed this guide to bridge an internal virtual switch (with Hyper-V legacy network adapter for XP) to the host wifi. I hope this saves someone else some time when working on an XP virtual.
Using Hyper-V with a Wireless Network Adapter
I am trying to run a virtual LAMP machine on my windows 7 for dev purposes. But i cant figure out how to reach the apache from the host windows 7 system. I did an ifconfig and tried the ipaddress, but to no avail.
If you set virtualbox to use bridged (regular) networking then it's no different from any other machine on the LAN, if you set host only then you can still call it - you just need to know it's IP address.
See http://opensourceexperiments.wordpress.com/2008/04/18/virtualbox-case-study-making-host-only-networking-work-between-two-ubuntu-guest-os-virtual-machine-on-windows-vista-host/
You will need to set the networking mode of your VM in virtualbox.
Bridged will allow others on the LAN
to access your VM.
Host-Only will allow your host and
any other VM's also configured as
host-only to access one another.
Virtual Box Neworking
If you look at the link you will have many different options on the type of networking you can do.
as mentioned earlier, I recommend either:
Bridged networking that makes the box look like an other computer on your network. They you may use ipconfig on the box or verify your router logs.
Host-Only networking is where your windows 7 will be its own network between the box and windows and then you may use the Ip address from ipconfig.
I'm running Server 2008 64bit with Hyper-V. I've created a virtual machine with Vista 64bit and installed it. I can't get the Vista virtual machine to see the network adapter.
I've set-up an external network on the Virtual Network Manager (Hyper-V) and associated that with the virtual machine (Vista). I've also tried using a Legacy Network Adapter but that didn't work either although that time the Vista machine saw the network card but couldn't connect through it.
This is (obviously) the first time I've tried to set-up a virtual machine.
Any ideas?
EDIT: I notice that this question has been voted down a couple of times. I know that it's not a programming question but I'm a developer setting up a virtual machine to test my C#/ASP.NET code on and thought that other developers may hit this problem as well when they're doing this...
I don't know Hyper-V, but I know in VMWare you can create a network connection in Bridged mode (meaning the VM will get it's own IP address via DHCP if that's enabled) or host-only mode (meaning the VM can only communicate with the host). When Vista could see the card, could it communicate with the host machine (which would indicate a host-only connection was specified)? What kind of IP address did it have (I would guess Hyper-V has a built-in DHCP server like VMWare does?) -- that might give additional clues.
Sorry I don't know Hyper-V better...
Make sure you have the Hyper-V Tools installed on the Guest VM. You shouldn't need the legacy adapter.
You also may want to make sure you have all of the latest updates which may have addressed your issue. Particularly, KB950050
http://support.microsoft.com/kb/950050
It turns out that Vista x64 running as a VM through Hyper-V doesn't support the virtual network connection/card and that you have to set it up as a legacy network card. When I eventually got the config settings correct for the legacy network and disable the virtual network it connected.
Thanks for the help guys - much appreciated!