I have a table of ~20 millions in postgreSQL and I want to delete it.
But every one of there operations doesn't work (It still running more than 12 hours without success):
- DELETE
- TRUNCATE
- VACUUM
- ANALYZE
I can't do anythink on this table...
A few day's ago I try to re-generate the id (BIGSERIAL) of each line with:
ALTER SEQUENCE "data_id_seq" RESTART WITH 1
UPDATE data SET id=nextval('data_id_seq')
And I think this operation brok the table...
If someone know how can I delete this table, thanks for help !
Try this...
DROP TABLE table_name;
See the doc
Related
I have a hive job that is scheduled to be executed. At the beginning of the job, I want to truncate a table by doing:
TRUNCATE TABLE SOMETABLE
The problem is that the table may be empty. In that case, I don't want to perform the truncate operation which will raise an exception. I know in MySQL you can do something like:
IF EXISTS(SELECT * FROM SOMETABLE)
BEGIN
TRUNCATE SOMETABLE
END
Is there a way I can achieve something similar in hive? Thanks a lot for your help!
If the table is empty also hive won't raise any exception.
You can also make use of Temporary tables in hive so that these tables only accessible through the session that established and very useful to manage intermediate data.
Once the session got closed then Hive deletes all temporary tables.
Please refer this and this links regarding hive temporary tables.
I had a table test that has 25000 rows in Oracle 11g. I had given a Delete statement as Follows.
delete from test;
This query was running more than 5 minutes but still not coming out and am not getting any error messages also. Can someone tell me what could be the problem?
try
delete from test nologging;
If you are using delete without a filter, you're better off using truncate as turbanoff said. Also in my experience using a delete from table within a script of some sort causes the symptoms you are having.
In a database for a forum I mistakenly set the body to nvarchar(MAX). Well, someone posted the Encyclopedia Britanica, of course. So now there is a forum topic that won't load because of this one post. I have identified the post and ran a delete query on it but for some reason the query just sits and spins. I have let it go for a couple hours and it just sits there. Eventually it will time out.
I have tried editing the body of the post as well but that also sits and hangs. When I sit and let my query run the entire database hangs so I shut down the site in the mean time to prevent further requests while it does it's thinking. If I cancel my query then the site resumes as normal and all queries for records that don't involve the one in question work fantastically.
Has anyone else had this issue? Is there an easy way to smash this evil record to bits?
Update: Sorry, the version of SQL Server is 2008.
Here is the query I am running to delete the record:
DELETE FROM [u413].[replies] WHERE replyID=13461
I have also tried deleting the topic itself which has a relationship to replies and deletes on topics cascade to the related replies. This hangs as well.
Option 1. Depends on how big the table itself and how big are the rows.
Copy data to a new table:
SELECT *
INTO tempTable
FROM replies WITH (NOLOCK)
WHERE replyID != 13461
Although it will take time, table should not be locked during the copy process
Drop old table
DROP TABLE replies
Before you drop:
- script current indexes and triggers so you are able to recreate them later
- script and drop all the foreign keys to the table
Rename the new table
sp_rename 'tempTable', 'replies'
Recreate all the foreign keys, indexes and triggers.
Option 2. Partitioning.
Add a new bit column, called let's say 'Partition', set to 0 for all rows except the bad one. Set it to 1 for bad one.
Create partitioning function so there would be two partitions 0 and 1.
Create a temp table with the same structure as the original table.
Switch partition 1 from original table to the new temp table.
Drop temp table.
Remove partitioning from the source table and remove new column.
Partitioning topic is not simple. There are some examples in the internet, e.g. Partition switching in SQL Server 2005
Start by checking if your transaction is being blocked by another process. To do this, you can run this command..
SELECT * FROM sys.dm_os_waiting_tasks WHERE session_id = {spid}
Replace {spid} with the correct spid number of the connection running your DELETE command. To get that value, run SELECT ##spid before the DELETE command.
If the column sys.dm_os_waiting_tasks.blocking_session_id has a value, you can use activity monitor to see what that process is doing.
To open activity monitor, right-click on the server name in SSMS' Object Explorer and choose Activity Monitor. The Processes and Resource Waits sections are the ones you want.
Since you're having issues deleting the record and recreating the table, have you tried updating the record?
Something like (changing "body" field name to whatever it is in the table):
update [u413].[replies] set body='' WHERE replyID=13461
Once you clear out the text from that single reply record you should be able to alter the data type of the column to set an upper bound. Something like:
alter table [u413].[replies] alter column body nvarchar(100)
I have a table that has something like half a million rows and I'd like to remove all rows.
If I do simple delete from tbl, the transaction log fills up. I don't care about transactions this case, I do not want to rollback in any case. I could delete rows in many transactions, but are there any better ways to this?
How to efficiently remove all rows from a table in DB2? Can I disable the transactions for this command somehow or is there special commands to do this (like truncate in MySQL)?
After I have deleted the rows, I will repopulate the database with similar amount of new data.
It seems that following command works in newer versions of DB2.
TRUNCATE TABLE someschema.sometable IMMEDIATE
To truncate a table in DB2, simply write:
alter table schema.table_name activate not logged initially with empty table
From what I was able to read, this will delete the table content without doing any kind of logging which will go much easier on your server's I/O.
(I've tried this in MySql)
I believe they're semantically equivalent. Why not identify this trivial case and speed it up?
truncate table cannot be rolled back, it is like dropping and recreating the table.
...just to add some detail.
Calling the DELETE statement tells the database engine to generate a transaction log of all the records deleted. In the event the delete was done in error, you can restore your records.
Calling the TRUNCATE statement is a blanket "all or nothing" that removes all the records with no transaction log to restore from. It is definitely faster, but should only be done when you're sure you don't need any of the records you're going to remove.
Delete from table deletes each row from the one at a time and adds a record into the transaction log so that the operation can be rolled back. The time taken to delete is also proportional to the number of indexes on the table, and if there are any foreign key constraints (for innodb).
Truncate effectively drops the table and recreates it and can not be performed within a transaction. It therefore required fewer operations and executes quickly. Truncate also does not make use of any on delete triggers.
Exact details about why this is quicker in MySql can be found in the MySql documentation:
http://dev.mysql.com/doc/refman/5.0/en/truncate-table.html
Your question was about MySQL and I know little to nothing about MySQL as a product but I thought I'd add that in SQL Server a TRUNCATE statement can be rolled back. Try it for yourself
create table test1 (col1 int)
go
insert test1 values(3)
begin tran
truncate table test1
select * from test1
rollback tran
select * from test1
In SQL Server TRUNCATE is logged, it's just not logged in such a verbose way as DELETE is logged. I believe it's referred to as a minimally logged operation. Effectively the data pages still contain the data but their extents have been marked for deletion. As long as the data pages still exist you can roll back the truncate. Hope this is helpful. I'd be interested to know the results if somebody tries it on MySQL.
For MySql 5 using InnoDb as the storage engine, TRUNCATE acts just like DELETE without a WHERE clause: i.e. for large tables it takes ages because it deletes rows one-by-one. This is changing in version 6.x.
see
http://dev.mysql.com/doc/refman/5.1/en/truncate-table.html
for 5.1 info (row-by-row with InnoDB) and
http://blogs.mysql.com/peterg/category/personal-opinion/
for changes in 6.x
Editor's note
This answer is clearly contradicted by the MySQL documentation:
"For an InnoDB table before version 5.0.3, InnoDB processes TRUNCATE TABLE by deleting rows one by one. As of MySQL 5.0.3, row by row deletion is used only if there are any FOREIGN KEY constraints that reference the table. If there are no FOREIGN KEY constraints, InnoDB performs fast truncation by dropping the original table and creating an empty one with the same definition, which is much faster than deleting rows one by one."
Truncate is on a table level, while Delete is on a row level. If you would translate this to sql in an other syntax, truncate would be:
DELETE * FROM table
thus deleting all rows at once, while DELETE statement (in PHPMyAdmin) goes like:
DELETE * FROM table WHERE id = 1
DELETE * FROM table WHERE id = 2
Just until the table is empty. Each query taking a number of (milli)seconds which add up to taking longer than a truncate.