Related
I have installed ansible in on of my GCE Debian VM Instance(1). Now I want to connect to another GCE Debian VM instance(2).
I have generated the public key on Instance 1 and copied the .pub key manually to the the authorized key of instance 2.
But, when I try to do the ssh from 1 to 2 it gives permission denied.
Is there any other way round? I am a little new to this, trying to learn.
is there any step by step guide available? and also what is the exact ip address to do ssh on? will it be the internal IP or the External IP taken by GCE when the Instance is started.
I'm an Ansible user too and I manage a set of compute engine servers. My scenario is pretty close to yours so hopefully this will work for you as well. To get this to work smoothly, you just need to realise that ssh public keys are metadata and can be used to tell GCE to create user accounts on instance creation.
SSH public keys are project-wide metadata
To get what you want the ssh public key should be added to the Metadata section under Compute Engine. My keys look like this:
ssh-rsa AAAAB3<long key sequence shortened>Uxh bob
Every time I get GCE to create an instance, it creates /home/bob and puts the key into the .ssh/authorized_keys section with all of the correct permissions set. This means I can ssh into that server if I have the private key. In my scenario I keep the Private Key only in two places, LastPass and my .ssh directory on my work computer. While I don't recommend it, you could also copy that private key to the .ssh directory on each server that you want to ssh from but I really recommend getting to grips with ssh-agent
Getting it to work with Ansible
The core of this is to tell Ansible not to validate host checking and to connect as the user specified in the key (bob in this example). To do that you need to set some ssh options when calling ansible
ansible-playbook -ssh-common-args='-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no' -u bob
Now Ansible will connect to the servers mentioned in your playbook and try to use the local private key to negotiate the ssh connection which should work as GCE will have set things up for you when the VM is created. Also, since hostname checking is off, you can rebuild the VM as often as you like.
Saying it again
I really recommend that you run ansible from a small number of secure computers and not put your private key onto cloud servers. If you really need to ssh between servers, look into how ssh-agent passes identity around. A good place to start is this article.
Where did you say the metadata was?
I kind of glossed over that bit but here's an image to get you started.
From there you just follow the options for adding a public key. Don't forget that this works because the third part of the key is the username that you want GCE and Ansible to use when running plays.
It's quite simple if you have two instances in google cloud platform, automatically you have the guest environment installed (gcloud command line), with it you can ssh through all you ssh inside your project:
Just run the following command line for inside your instance A to reach the Instance B
[user#Instance(1)]$ gcloud compute ssh Instance(2) --zone [zone]
That it, if it's not working let me know, and verify if your firewall rule let internal traffic.
I have a Raspberry Pi set up as a download server at home. To access it from any Windows PC I download Putty and add its parent folder to the Path environment variable.
When accessing it via SSH using Putty GUI or CLI from any PC on my home network, it attempts to login with an SSH key, if it fails it prompts me for a password, and I can login.
I set up an ngrok account to be able to access the server from work (ngrok uses the same address for all users, but each free user gets a specific port, randomized on server reboot).
If i open up Putty's GUI and add the address (0.tcp.ngrok.io) and my port (13495) and click Open, I login normally, SSH key first, if that fails, password prompt, and I can login; as shown in the following picture: Putty GUI Login
However, if I login by command using "putty root#0.tcp.ngrok.io:13495" from the command line or making a Windows shortcut with that command as the target, it reacts as if password authentication is disabled and the only authentication method is via SSH key, which is not the case. (Failed Putty Logins)
I finally attempted to add the SSH key of my work desktop to the authorized_keys file, nothing changed. I can login by GUI using the key, but CLI login still fails.
I have tried resetting all of Putty's settings, redownloading, using Pageant instead of the Putty settings SSH>Auth, nothing works.
I have searched far and wide and delved into the creepy depths of the Internet and cannot find ANYONE with the same problem. If someone does find a post with the same question, well then that post must be running away from me.
Help me, please.
This is starting to get quite irritating.
Thanks in advance.
It's because PuTTY actually ignores everything after the colon (for a consistency with PuTTY psftp and pscp tools, where you specify a path after the colon).
So the putty root#0.tcp.ngrok.io:13495 works like putty root#0.tcp.ngrok.io. That means you actually connect to the default SSH 22 port, not to the 13495.
You have to use the -P switch to specify the non-default port:
putty root#0.tcp.ngrok.io -P 13495
After changing two passwords, root and the default user, suddenly we notice now that the "in browser" link on Google Compute Engine fails to connect via SSH.
Strangely, however, if we use the SSH command from the command line that Google provides (i.e. $ gcloud compute ssh VM-NAME --zone VM-ZONE) - SSH works.
It appears SSH is working - but the "in browser" SSH link no longer connects. What might have gone wrong and how do we fix this?
ADDENDUM:
Of note, a commenter below suggests it is not related to passwords but purely SSH keys - so it looks the answer to this question might rest around if there is a way to regenerate SSH keys on GCE instances. We are searching. If anyone knows code to regenerate SSH keys for GCE please post.
GCE VMs, by default, don't allow for SSH connections with clear-text password: it uses keys instead. You can specify approved keys during VM instantiation, or at a later time, but one that is always present is the key to the user account you used when creating the machine.
As long as you haven't modified /etc/ssh/sshd_config, this should continue to be the case. Either way, one more option you can use to connect via SSH to your instance is to run the following command:
$ gcloud compute ssh VM-NAME --zone VM-ZONE
while logged in with your authorized user account.
ADDENDUM - In lieu of regenerating previous keys, you can add additional, locally-generated SSH keys on both the project, as well as on the VM level. The first applies to all VMs and grants access to project owners and editors, while the second only applies to the VM in question. Both methods add the SSH entered to the Metadata server, from which the get uploaded to the VM prior to SSH connection to all / the VM.
You can do this from the Developers Console:
project-level SSH keys - go to your project -> Compute -> Compute Engine -> Metadata -> "SSH KEYS" (top of the screen) -> click on "Edit"
VM-level SSH keys - go to your project -> Compute -> Compute Engine -> VM instances -> click on the instance name -> "SSH keys" section (scroll down) -> click "Add SSH key"
We discovered the cause was a chown command we had executed on a directory for the primary user that Google creates on the Google Compute Engine instance.
By reversing that chown back to the Google created user, Google's in-browser SSH began working again.
We used chown on an entire user directory and also an ssh config file back to the Google created user using:
chown -R user_name_com /home/user_name_com
and also on this file
chown user_name_com /etc/ssh/ssh_config
where user_name_com was our gmail email address user.
I'm trying to connect to my Debian Google Compute Engine server through PuTTy (I've tried other alternatives too) but when I do I get the error "Disconnected: No supported authentication methods available (server sent: publickey)
The google server came without a username and password, only a url to automatically login to their own terminal.
I had PuTTY working and then one day got this error.
Solution: I had revised the folder path name containing my certificates (private keys), and this caused Pageant to lose track of the certificates and so was empty.
Once I re-installed the certificate into Pageant then Putty started working again.
Turn on Password Authentication
By default, you need to use keys to ssh into your google compute engine machine, but you can turn on password authentication if you do not need that level of security.
Tip: Use the Open in browser window SSH option from your cloud console to gain access to the machine. Then switch to the root user with sudo su - root to make the configuration changes below.
Edit the /etc/ssh/sshd_config file.
Change PasswordAuthentication and ChallengeResponseAuthentication to yes.
Restart ssh /etc/init.d/ssh restart.
Please follow this guide: https://gist.github.com/feczo/7282a6e00181fde4281b
with pictures.
In short:
Using Puttygen, click 'Generate' move the mouse around as instructed and wait
Enter your desired username
Enter your password
Save the private key
Copy the entire content of the 'Public key for pasting into OpenSSH authorized_keys file' window. Make sure to copy every single character from the beginning to the very end!
Go to the Create instances page in the Google Cloud Platform Console and in the advanced options link paste the contents of your public key.
Note the IP address of the instance once it is complete.
Open putty, from the left hand menu go to Connection / SSH / Auth and define the key file location which was saved.
From the left hand menu go to Connection / Data and define the same username
Enter the IP address of your instance
name the connection below saved Sessions as 'GCE' click on 'Save'
double click the 'GCE' entry you just created
accept the identy of the host
Now login with the password you specified earlier and run
sudo su - and you are all set.
You need to use an SSH key to login to your instance.
The GCE documentation explains the process here.
I had the same problem but got it working by changing enable-oslogin from TRUE to FALSE in google cloud.
from:
to:
I had the same issue and just figured it out !!
Assuming that you already went and created private/public key added your public key on the remote server ... type in username#remotehost.com and THEN go to Connection -> SSH -> Auth and click Browse to locate your private key. After you choose it will populate the input field. After that click OPEN ...
So the important thing here is the order... make sure you first enter parameters for the host and then locate your private key.
I got this error because I had forgotten to add my username behind the key in the GCE metadata section. For instance, you are meant to add an entry into the metadata section which looks like this:
sshKeys username:key
I forgot the username: part and thus when I tried to login with that username, I got the no supported auth methods error.
Or, to turn off the ssh key requirement entirely, check out my other answer.
Apparently running sudo chmod -R a+rw on your home folder causes this to happen as well.
This problem mainly caused by your connected username not have the access to the shell in GCE. So you use the following steps to solve this issue.
gcloud auth list
If you are using the correct login. please follow the below steps. otherwise use
gcloud auth revoke --all
gcloud auth login [your-iam-user]
and you get the token or it automatically detect the token.
gcloud compute --project "{projectid}" ssh --zone "{zone_name}" "{instance_name}" .
if you dont know this above line click to compute engine-> ssh dropdown arrow-> view google command-> copy that code and use it
Now it update your metadata and it is available in your computer's folder Users->username
~/.ssh/google_compute_engine.ppk
~/.ssh/google_compute_engine.pub
Then you create a new ppk file using puttygen and you give the username, which you want like my_work_space. Then
save the publickey and privatekey in a folder.
Next step: Copy the public key data from puttygen and create new ssh key in gcloud metadata
cloud console ->compute engine->metadata->ssh key->add new item->paste the key and save it
and now return your shell commandline tool then enter
sudo chown -R my_work_space /home/my_work_space
now you connect this private key using sftp to anywhere. and it opens the files without showing the permission errors
:) happy hours.
If the private key has been generated with ssh-keygen in Linux it needs to be converted with puttygen because Putty does not support openssh keys.
Start puttygen, and click on Conversions - Import key, then click Browse and select the private key generated with openssh, then click on Save private key.
Use your new key to connect.
I faced the same issue and solve after several trial and error.
In the /etc/ssh/ssh_config, set
PubkeyAuthentication yes
AuthorizedKeysFile .ssh/authorized_keys
PasswordAuthentication no
AuthenticationMethods publickey
then, open putty.
In the "Saved Sessions", enter the server IP, go through the path Connection->SSH->Auth->Browse on the left panel to search your private key and open it.
Last but not least, go back to Session of putty on the left panel and you can see the server IP address is still in the field, "Saved Sessions", then click "Save", which is the critical step.
It will let the user login without password any more.
Have fun,
Download "PuttyGEN" get publickey and privatekey
use gcloud SSH edit and paste your publickey located in /home/USER/.ssh/authorized_keys
sudo vim ~/.ssh/authorized_keys
Tap the i key to paste publicKEY.
To save, tap Esc, :, w, q, Enter.
Edit the /etc/ssh/sshd_config file.
sudo vim /etc/ssh/sshd_config
Change
PasswordAuthentication no
[...]
ChallengeResponseAuthentication to no.
[...]
UsePAM no
[...]
Restart ssh
/etc/init.d/ssh restart.
the rest config your putty as tutorial
NB:choose the pageant add keys and start session would be better
Electricity went down and got this error. Solution was to double click your .ppk (Putty Private Key) and enter your password.
PasswordAuthentication and ChallengeResponseAuthentication default set to NO in rhel7.
Change them to NO and restart sshd.
Similar problem - same error message. I got the same message when trying to clone something from bitbucket with ssh. The problem was in my ssh configuration configured in the mercurial.ini: I used the wrong bitbucket username. After I corrected the user name things worked.
For me these was my problem, solution from https://unix.stackexchange.com/questions/282908/server-refused-public-key-signature-despite-accepting-key-putty
"Looking at the log /var/log/secure showed that it was just downright refused. I'm somewhat new to centos since I'm mainly a debian kind of guy, so I was unaware of /var/log/secure
After checking this and doing a bit of searching, it turns out PermitRootLogin no needs to be PermitRootLogin without-password if you want to specifically use just keys for root login. That did the trick. Thanks everyone for contributing."
I had the same error message and discovered that my mistake was in the username I used with putty. Apparently GCE SSH Keys listing would change your username characters in some of the listing. In my case, the underscore was changed to period. i.e: my_username becomes my.username
I inadvertently copied the wrong username from the listing and got the same error message.
I know this is an old question, but I had the same problem and solved it thanks to this answer.
I use Putty regularly and have never had any problems. I use and have always used public key authentication. Today I could not connect again to my server, without changing any settings.
Then I saw the answer and remembered that I inadvertently ran chmod 777 . in my user's home directory. I connected from somewhere else and simply ran chmod 755 ~. Everything was back to normal instantly, I didn't even have to restart sshd.
I hope I saved some time from someone
I am a newbie to Amazon web services, was trying to launch an Amazon instance and SSH to it using putty from windows. These are the steps I followed:
Created a key pair.
Added a security group rule for SSH and HTTP.
Launched and instance of EC2 using the above key pair and security group.
Using PuTTYgen converted the *.pem file to *.ppk
Using putty tried connecting to the public DNS of the instance and provided the *.ppk file.
I logged in using 'root' and 'ec2-user', and created the PPK file using SSH1 and SSH2, for all these attempts I get the following error in putty,
"Server refused our key"
Can you guys please help, any suggestions would be greatly appreciated.
I assume that the OP figured this out or otherwise moved on, but the answer is to use ubuntu as the user (if the server is ubuntu).
1) Make sure you have port 22 (SSH) opened in Security Group of EC2 Instance.
2) Try connecting with Elastic IP instead of public DNS name.
I hope you have followed these steps Connecting EC2 from a Windows Machine Using PuTTY
Another situation where I got the "Server refused our key" error when using putty, from windows, to ssh to an EC2 instance running ubuntu:
The private key was wrongly converted from .pem to .ppk.
puttygen has two options for "converting keys".
Load your .pem file into puttygen using the File->Load Private Key option and then save as .ppk file using the Save Private Key Button.
DO NOT use the menu option Conversions->Import Key to load the .pem file generated by EC2.
See the puttygen screenshots below, with the two menu options marked.
Check the username, it should be "ubuntu" for your machine.
Check if traffic is enabled on port 22 in Security group.
Check if you are using the correct url i.e ubuntu#public/elasticip
Maybe worth of checking one more thing. Go to AWS console, right mouse click on the instance and choose "Connect...". It will show you the DNS name that you want to use. If you restarted that instance at some point, that DNS name could have changed.
I had a similar problem when I tried to connect an instance created automatically by the Elastic Beanstalk service (EBS). But, once I linked my existing key name to the EBS (under Environment Details -> Edit Configuration -> Server Tab -> Existing Key Pair), I was able to login with 'ec2-user' and my existing key file (converted to .ppk) with putty.
This, however, terminates the running instance and rebuilds a new instance with access through the key pair named above.
Just in case it helps anyone else, I encountered this error after changing the permissions on the home folder within my instance. I was testing something and had executed chmod -R 777 on my home folder. As soon as this had occurred, once I had logged out I was effectively locked out.
You won't face this error if you SSH AWS directly using ".pem" file instead of converted ".ppk" file.
1) Use Git Bash instead of putty. Since you can run all the Linux commands in Git Bash. By installing Git you get to access Git Bash Terminal
2) Right click from the folder where you have ".pem" and select "Git Bash Here".
3) Your key must not be publicly viewable for SSH to work. So run "chmod 400 pemfile.pem".
4) Connect to your instance using its Public DNS - "ssh -i "pemfile.pem" ec2-user#ec2-x-x-x-x.us-west-1.compute.amazonaws.com"
5) Make sure to whitelist your Network IP for SSH in your_instance->security_group->inbound_rules
I assume you're following this guide, and connecting using the instructions on the subsequent page. Verify a couple of things:
You converted the key correctly, e.g. selected the right .pem file, saved as private key, 1024-bit SSH-2 RSA
The Auth settings (step 4 in the connection tutorial) are correct
I was having the same trouble (and took the same steps) until I changed the user name to 'admin' for the debian AMI I was using.
You should lookup the user name ofthe AMI you are using. The debian AMI is documented here
http://wiki.debian.org/Cloud/AmazonEC2Image/Squeeze
I have had this same problem. The AMI you are using is the one that is also used by the "Cloud Formation" templating solution.
In the end I gave up with that, and created a Red Hat instance. I was then able to connect by SSH fine using the user root.
The instructions here: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/putty.html work fine using a Red Hat instance but not using an Amazon Linux instance. I assume they have some username that I didn't think to try (root, ec2-user, and many other obvious ones, all were refused)
Hope that helps someone!
I use Debain AMI and I try ec2-user, root but correct login is 'admin'.
I was getting the same error when I tried to create a new key pair and tried to use that new pem/ppk file. I noticed that the Key Pair Name field on the instance was still the old one and in poking around. Apparently, you can't change a key pair. So I went back to the original key pair. Fortunately, I didn't delete anything so this was easy enough.
Try an alternative SSH client, like Poderosa. It accepts pem files, so you will not need to convert the key file.
If you already have a key pair, follow these steps:
Convert *.pem to *.ppk using PuTTYgen (Load pem file key then Save ppk)
Add ppk auth key file to Putty SSH>Auth options
Enter "Host Name (or IP address)" field: ubuntu#your-ip-address-of-ubuntu-ec2-host))