i'am trying to integrate hybris 4.7.9 with endeca. I have installed the following endeca components. 1)MDEX engine 2)Platform services 3)Endeca workbench 4)CAS.
I have deployed a sample application on endeca side using "D:\Endeca\ToolsAndFrameworks\11.0.0\deployment_template\bin\deploy.bat"
In Hyend2 in admincockpit of hybris
I have made EAC/CAS connection with my appication and made a export job.
Problem is i am not able to run that job, it reports me following error:
http://localhost:8500/MyAppen_en_data/?wsdl returned response code 404
at com.endeca.itl.service.ServiceLocator.getService(ServiceLocator.java:150)
I don't know Hybris, but since the error is related to Endeca, let me try to give some pointers.
CAS: Check that CAS is up and running
App Name: You might have specified app-name-with-locale (MyAppen) somewhere where you need to specify only app-name (MyApp). [The Endeca app name without the locale is called as "Base Application Name". Go back and check all your configurations in Hybris and Endeca].
You may also refer to this blog (Although it is for ATG framework, it should give idea for Hybris as well).
Related
I am facing a weird problem today, when running my MuleSoft application locally from my AnypointStudio and firing a request from postman, I am getting 403 error. When debugging I found out that the application is checking for flowVars._clientName, however it is missing. According to this documentation, actually yes flowVars._clientName is expected.
https://help.mulesoft.com/s/article/How-to-get-the-client-application-name-in-a-flow-based-on-the-client-id-and-client-secret.
So my application fails with 403 error. Seems that other environments are working perfectly fine.
And yes it is using Client Id enforcement.
Any clues?
Without more details it looks like the issue is inside the logic of your application. The KB article that you referenced is a how to in case you need to obtain the client name. It doesn't say that you have to use for authentication. You don't describe how the application does authentication/authorization. Is it in a flow? Or in a policy? If it is the standard Client ID enforcement policy, the expressions to evaluate client id and secret can be configured, but I don't think the default is not #[flowVars._clientName] nor #[flowVars._clientId].
Note that Exchange is basically a repository of APIs and other artifacts. It doesn't authenticate anything at execution time. Unless your application is trying to use it somehow, but I can't think of a reason for that.
The issue was resolved only by re-downloading Anypoint Studio and mule runtime. Very weird, it was happening only for one application, not for the others. Creating a new workspace did not help, deleting the application and re-cloning and installing did not help, even recloning in a new directory did not help. Only using a new Anypoint Studio and runtime installation resolved it (even with the old code base) ...
I have a ASP.NET Core with Blazor website and I want to deploy it to Arvixe host. The website is very simple and contains only UI elements no database required. I published the website to a local file system and uploaded it using FTP to the Plesk.
When I am visiting the website, I receive this error:
500 - Internal server error. There is a problem with the resource you
are looking for, and it cannot be displayed.
I have tried to run it on the IIS and I received more details:
Configuration The configuration file cannot be read due to
insufficient permissions.
I tried to add IIS_IUSRS to the group and users for web.config but I am not able to find it because I am using a windows 10 connected to active directory.
Besides, I still don't know how to solve this problem at Arvixe. Does anyone know tips might help?
500 internal error is generic issue. Please kindly check the error message on the server and paste it here. Make sure that your provider has installed .net core bundled on their server and here are tutorial about publsih .net core using plesk https://windowswebhostingreview.com/how-to-publish-using-web-deploy-with-plesk-control-panel/. It should be working fine.
You need to give Full Trust permission (Read-Write-Execute) to your application folder and also to Application Pool and also check if the Runtime version supported by Arvixe matches with your Asp.net Core version.
Also enable the logs in web.config file by setting stdoutLogEnabled="true" to get detailed error so that you can investigate more about the error.
After Configuration server Juddi in Eclipse and create environment variable
we get Problem to access to page Gui user and admin and tomcat interface :
I think you are looking at something like :
message java.lang.IllegalStateException: No output folder
I would check the Tomcat logs, the permissions of the user you are running tomcat under, and check the directory that you have installed your tomcat into.
Do not even try to use UDDI
these days. People are moving towards semantic web services ,UDDI is out of the scene.
WSMO and OWL-s are major initiatives for semantic web services. These solutions can provide more precise results.
Here's a few
mDNS/Bonjour/Avahi - can be used to share endpoint information for a web service, or anything else using a TXT record
WS-Discovery - supported by CXF and WCF, shares implementation of a specific interface
ebXML - had a component similar to UDDI
visite this link
When I am in the web studio I click the Search configurations or Dimension Order, I get the following error:
The operation failed because the manager state is 'Stopped'. For the operation to succeed, the manager state must be running. Make sure all ENEs and A-ENEs are running.
It is version 4.8. This was installed and configured long before I got here. I have no experience in Endeca. No idea how it all works and information online isn't very helpful.
Any help would be appreciated.
Thanks!
Brian
Version 4.8 doesn't have Endeca HTTP Service or Endeca Tool Service, plus it's not clear that the author's installation is running on Windows. I believe Endeca v4.8 only had Web Studio (Tomcat app), JCD, Dgraph, and Agraph processes. having said that the error message indicates that you need to make sure that either Dgraph or Agraph processes are running (ENE is short for endeca navigation engine and is an alias for dgraph, a-ene is an alias for agraph)
There could more information in the tomcat logs, please check those which should be located under workspace\logs folder.
All of the endeca services need to be running. On a windows machine make sure "Endeca HTTP Service", "Endeca JCD", and "Endeca Tools service" are all running.
I'm using the web deploy API to deploy a web package (.zip file, created by MSDeploy.exe) to programmatically roll the package out to a server (we need to do some other things before we release the package which is why we're not doing it all in one go using MSDeploy.exe).
Here's the code I have. My question is really to clarify what is happening when this is executed. In the package parameters XML file I have the application name specified ("Default Web Site") but that's about it, there's no other params are specified in there. From testing the server it appears the package gets deployed successfully but my question is are any other settings on the server I'm deploying to getting changed without my knowledge, are any default settings published etc.? Things like security settings, directory browsing etc. that I might not be aware of? The code here seems to deploy the package but I'm anxious about using this on a production environment when I'm so unsure of how this API works. The MS documentation is not helpful (more like non-existant, actually).
DeploymentChangeSummary changes;
string packageToDeploy = "C:/MyPackageLocation.zip";
string packageParametersFile = "C:/MyPackageLocation.SetParameters.xml";
DeploymentBaseOptions destinationOptions = new DeploymentBaseOptions()
{
UserName = "MyUsername",
Password = "MyPassword",
ComputerName = "localhost"
};
using (DeploymentObject deploymentObject = DeploymentManager.CreateObject(DeploymentWellKnownProvider.Package,
packageToDeploy))
{
deploymentObject.SyncParameters.Load(packageParametersFile);
DeploymentSyncOptions syncOptions = new DeploymentSyncOptions();
syncOptions.WhatIf = false;
//Deploy the package to the server.
changes = deploymentObject.SyncTo(destinationOptions, syncOptions);
}
If anyone could clarify that this snippet should deploy a package to a web site application on a server, without changing any existing server settings (unless specified in the SetParameters.xml file) that would be really helpful. Any good resources on using the API or an explanation of how web deployment works behind the scenes would also be much appreciated!
The setparameters file just controls the value for the parameters defined in the package. A package might be doing much more than that. Web deploy has a concept of providers and any given package can have one or more providers.
If you want to make sure that the package is not changing server side settings the best approach you can take is to use the API but make the packages be deployed via Web Management Service. This will give you two benefits:
You can control what providers you allow through.
You can add users and give restricted permissions to them to deploy to their site or their folder etc.
The alternate approach is to:
In the package manually look at the archive.xml and look for the providers in the package. As long as you dont see any of the following providers that can cause server settings change such as apphostconfig or webserver or regkey (this is not a comprehensive list) you should be good. Runcommand is a provider that allows you to execute batch scripts or commands. While it is a good provider for admins themselves you need to consider whether you want to allow packages with such providers to run.
You can do the above mentioned inspection in code by calling getchildren on the deployment object you create out of the package and inspect the providers and the provider paths.