When I am in the web studio I click the Search configurations or Dimension Order, I get the following error:
The operation failed because the manager state is 'Stopped'. For the operation to succeed, the manager state must be running. Make sure all ENEs and A-ENEs are running.
It is version 4.8. This was installed and configured long before I got here. I have no experience in Endeca. No idea how it all works and information online isn't very helpful.
Any help would be appreciated.
Thanks!
Brian
Version 4.8 doesn't have Endeca HTTP Service or Endeca Tool Service, plus it's not clear that the author's installation is running on Windows. I believe Endeca v4.8 only had Web Studio (Tomcat app), JCD, Dgraph, and Agraph processes. having said that the error message indicates that you need to make sure that either Dgraph or Agraph processes are running (ENE is short for endeca navigation engine and is an alias for dgraph, a-ene is an alias for agraph)
There could more information in the tomcat logs, please check those which should be located under workspace\logs folder.
All of the endeca services need to be running. On a windows machine make sure "Endeca HTTP Service", "Endeca JCD", and "Endeca Tools service" are all running.
Related
I am facing a weird problem today, when running my MuleSoft application locally from my AnypointStudio and firing a request from postman, I am getting 403 error. When debugging I found out that the application is checking for flowVars._clientName, however it is missing. According to this documentation, actually yes flowVars._clientName is expected.
https://help.mulesoft.com/s/article/How-to-get-the-client-application-name-in-a-flow-based-on-the-client-id-and-client-secret.
So my application fails with 403 error. Seems that other environments are working perfectly fine.
And yes it is using Client Id enforcement.
Any clues?
Without more details it looks like the issue is inside the logic of your application. The KB article that you referenced is a how to in case you need to obtain the client name. It doesn't say that you have to use for authentication. You don't describe how the application does authentication/authorization. Is it in a flow? Or in a policy? If it is the standard Client ID enforcement policy, the expressions to evaluate client id and secret can be configured, but I don't think the default is not #[flowVars._clientName] nor #[flowVars._clientId].
Note that Exchange is basically a repository of APIs and other artifacts. It doesn't authenticate anything at execution time. Unless your application is trying to use it somehow, but I can't think of a reason for that.
The issue was resolved only by re-downloading Anypoint Studio and mule runtime. Very weird, it was happening only for one application, not for the others. Creating a new workspace did not help, deleting the application and re-cloning and installing did not help, even recloning in a new directory did not help. Only using a new Anypoint Studio and runtime installation resolved it (even with the old code base) ...
I have a ASP.NET Core with Blazor website and I want to deploy it to Arvixe host. The website is very simple and contains only UI elements no database required. I published the website to a local file system and uploaded it using FTP to the Plesk.
When I am visiting the website, I receive this error:
500 - Internal server error. There is a problem with the resource you
are looking for, and it cannot be displayed.
I have tried to run it on the IIS and I received more details:
Configuration The configuration file cannot be read due to
insufficient permissions.
I tried to add IIS_IUSRS to the group and users for web.config but I am not able to find it because I am using a windows 10 connected to active directory.
Besides, I still don't know how to solve this problem at Arvixe. Does anyone know tips might help?
500 internal error is generic issue. Please kindly check the error message on the server and paste it here. Make sure that your provider has installed .net core bundled on their server and here are tutorial about publsih .net core using plesk https://windowswebhostingreview.com/how-to-publish-using-web-deploy-with-plesk-control-panel/. It should be working fine.
You need to give Full Trust permission (Read-Write-Execute) to your application folder and also to Application Pool and also check if the Runtime version supported by Arvixe matches with your Asp.net Core version.
Also enable the logs in web.config file by setting stdoutLogEnabled="true" to get detailed error so that you can investigate more about the error.
I am trying to setup Unicenta POS on my Windows 10 64 bit machine.
My configuration:
Idempiere server v5.1 (http://127.0.0.1:8080/)
ActiveMQ v5.15.2
(http://127.0.0.1:8161/)
POS Integration plugin (Available
here)
I followed instructions given Here. ActiveMQ is running fine, Unicenta can also send request to ActiveMQ, I can see that in Queues. Idempiere server is also running fine.
I installed POS integration plugin through Felix Web Console. It shows up in the list and It is active. But, that plugin doesn't show up in Idempiere Menu option. Either that plugin has some problems or I am missing something.
I also performed Role Access Update on GardenWorld Client Admin but that didn't change anything. Menu option is still missing.
Please help.
The real issue was that 2Pack did not Pack in into the Database. I had install 2Pack manually and Pack In in my SystemAdmin. After that I logged out and logged in with SuperUser credentials and with GardenAdmin role. And then menu item appeared!
2Pack zip file location - Download
How to Pack In:
i'am trying to integrate hybris 4.7.9 with endeca. I have installed the following endeca components. 1)MDEX engine 2)Platform services 3)Endeca workbench 4)CAS.
I have deployed a sample application on endeca side using "D:\Endeca\ToolsAndFrameworks\11.0.0\deployment_template\bin\deploy.bat"
In Hyend2 in admincockpit of hybris
I have made EAC/CAS connection with my appication and made a export job.
Problem is i am not able to run that job, it reports me following error:
http://localhost:8500/MyAppen_en_data/?wsdl returned response code 404
at com.endeca.itl.service.ServiceLocator.getService(ServiceLocator.java:150)
I don't know Hybris, but since the error is related to Endeca, let me try to give some pointers.
CAS: Check that CAS is up and running
App Name: You might have specified app-name-with-locale (MyAppen) somewhere where you need to specify only app-name (MyApp). [The Endeca app name without the locale is called as "Base Application Name". Go back and check all your configurations in Hybris and Endeca].
You may also refer to this blog (Although it is for ATG framework, it should give idea for Hybris as well).
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
what could be the reason of this error for the WCF service hosted on IIS 7.
Answered here
Please make sure you've activated WCF components from here.
Or alternate and easy way is, go to control panel -> Turn Windows feature on or off -> and make sure you've all the options ticked as mentioned in below screenshot.
Run from cmd:
%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -ir
All you need to do is enable HTTP Activation and any other features that are required for HTTP activation.
For Windows Server 2012,Go to server manager, on the dashboard --> click on Add roles and features. In the Wizard window that opens choose the appropriate server and go on clicking next until you are on the features selection page.
Depending on the version of .NET framework in use on your server you have to check HTTP Activation under WCF Services and proceed to install it. This should resolve your issue.
Run Visual Studio 2008 Command Prompt as “Administrator”.
Navigate to C:\Windows\Microsoft.NET\Framework\v3.0\Windows Communication Foundation.
Run this command servicemodelreg –i
Thanks for the blog from Rahul.
http://blogs.msdn.com/b/rjohri/archive/2009/06/29/the-page-you-are-requesting-cannot-be-served-because-of-the-extension-configuration.aspx