I am familiar with using virtual host with default port. Just now default port 80 was taken by another program. So, Would that be possible to create virtual host with custom port like 81 or 83 something like that.
Just now, I have to call phpmyadmin, using http://localhost:81/phpmyadmin but I can't create another project like http://test.local Below are the codes that I use in some files. Before I ask here, I google it, but no solution worked!
httpd-vhosts.conf file
NameVirtualHost *:81
<VirtualHost *:81>
DocumentRoot "D:\wamp\www\test"
ServerName test.local
<Directory "D:\wamp\www\test">
Allow from all
</Directory>
</VirtualHost>
hosts file
127.0.0.1:81 car.local
httpd.conf file
Listen 81
So, How do I need to do to get http://test.local like that url. I have installed wamp and xampp in my computer.
Related
I have multiple sites deployed on xampp. For now, all of the sites are using one port i.e. 80. For this reason, whenever I am logged into one of the sites, I am automatically logged out from the other and vice versa. I have looked at this article to How to run multiple websites on XAMPP on Windows. And tried to follow it but I am unable to do the needful.
I have added one more port to listen
Listen 80
Listen 8080
In my httpd-vhosts.conf I have done the following
NameVirtualHost *:8080
<VirtualHost *:8000>
DocumentRoot "F:\xampp\htdocs\mdc"
ServerName localhost:8080
<\VirtualHost>
After doing this I have turned off my xampp and then tried to restart apache and mysql. But apache is not starting
My URL is http://localhost:8080/mdc/backend/web
Note: Without doing any virtual host setting the above URL is accessible on both 80 and 8080 ports
Update 1
Herer is my httpd.conf file
This is not a fix for your issue, Here i will explain how i manage multiple websites on xampp.
First i assumes that your using windows
i always use the same port with different server names.
on : E:\xampp\apache\conf\extra\httpd-vhosts.conf (In my case i installed xampp on E drive)
i added this code
<VirtualHost *:80>
DocumentRoot "e:/xampp/htdocs/mysite1"
ServerName mysite1.flames.com
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "e:/xampp/htdocs/mysite2"
ServerName mysite2.flames-team.com
</VirtualHost>
And on ( C:\Windows\System32\drivers\etc\hosts) my windows host file i added this lines
127.0.0.1 mysite1.flames.com
127.0.0.1 mysite2.flames-team.com
With this approach you can access the site with a clean readable URLs
In this case if you want to see the first site just enter this URL mysite1.flames.com on browser.
Cheers
Write the closing tag </VirtualHost> instead of <\VirtualHost> in the file httpd-vhosts.conf. I did it and it worked for me.
So I set up a few virtual hosts with unique urls and they work just fine on the desktop. However, when I connect a mobile device on the network, it can't seem to access anything properly but the default localhost virtualhost and that's only when it's the only virtualhost I have up.
My setup and coding is pretty much this except with a different site title
wamp server 3.0 virtual host on another device
and while that solution redirects me to my unique url, it has a lack of images on a default wordpress website.
Has anyone managed to get mobile devices fully accessing links other than on localhost?
Since I posted the answer you referenced, I have decided upon a simpler solution.
What the actual problem is
Because we cannot fiddle with the configuration of a phone like we can with a PC, the phone can never find the domain name we create in our Virtual Host definition on the Server machine, because it does not exist in any DNS Server for it to locate the IP Address in, and a DNS Server is the only place a phone can look, unless it is jail broke.
If you wanted to access one of your Virtual Hosts domains from another PC you could just add a line like this into the HOSTS file on the other PC like this.
192.168.0.10 example.local
But you cannot do that on a phone/tablet.
What Apache expects to be able to asssociate a request to a Vhost
When we create an Apache Virtual Host, we are actually telling Apache to look at the domain name on the incoming connection and match that domain name to a ServerName that exists in one of our multiple Virtual Hosts definitions.
But if we use for example example.local as our virtually hosted domain when we attempt to connect to that from our phone, the phone does a DNS Lookup and does not find that domain and therefore cannot get its ip address.
The simplest way to get round this is:
Assuming we do not have access to adding record to a DNS Server we have to come up with a different solution.
The simplest of these is to use the IP Address of the PC running the WAMPServer(Apache) server and a specific port number. So thats a different port number for each of our sites we want to use from a phone.
So how do we do this
Add the new listening port to httpd.conf like so after the 2 existing Listen statements
WAMPServer 3: Do this using the menus, not by doing a manual edit on httpd.conf
right click wampmanager-> Tools -> Add listen port for Apache
#Listen 12.34.56.78:80
Listen 0.0.0.0:80
Listen [::0]:80
Listen 0.0.0.0:8000
Listen [::0]:8000
Suggested httpd-vhosts.conf file
#
# Virtual Hosts
#
# Always keep localhost, and always first in the list
# this way a ramdom look at your IP address from an external IP
# maybe a hack, will get told access denied
<VirtualHost *:80>
ServerName localhost
DocumentRoot c:/wamp/www
<Directory "c:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
# The normal Vhost definition for one of our sites
<VirtualHost *:80>
ServerName example.local
DocumentRoot "c:/websrc/example/www"
<Directory "d:/websrc/example/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
# Access example.dev from phone for testing
<VirtualHost *:8000>
ServerName example.local
DocumentRoot "c:/websrc/example/www"
<Directory "d:/websrc/example/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
# assuming yoursubnet is 192.168.0.?
# allow any ip on your WIFI access
Require ip 192.168.0
</Directory>
</VirtualHost>
Restart Apache from wampmanager after completing these edits.
Now you test this from the WAMPServer PC by using the ServerName i.e example.dev and from the phone using the ip of the PC running WAMPServer with the port number i.e. 192.168.0.10:8000
Apache will find the correct code to serve from both requests.
If you want more than one Virtual Host to be accessible from your phone you just duplicate this idea and change the port number for each new site, lets say you would use 8001,8002,8003 etc. For as many sites as you want to access.
You may also have to amend your firewall to allow access on http on port 8000, or whatever port you pick to use
I am not sure if this is a repost but I couldn't find a solution.
I have an application setup in my local environment which the name I added in my hosts file (C:\Windows\System32\drivers\etc) as follows,
127.0.0.1 skeletonpage.lk
Also I added a record in httpd-vhosts.conf as below.
<VirtualHost *>
DocumentRoot "C:/xampp/htdocs/skeleton/public"
ServerName skeletonpage.lk
<Directory "C:/xampp/htdocs/skeleton/public">
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
When I run the application on browser I can only load the homepage with the port number tagged with the site name. Ex: http://skeletonpage.lk:83/
I have both XAMPP and WAMP in my machine and my site runs in XAMPP for which the port 83 is given, If I remove :83 it loads the homepage of wamp server which has port 80.
I tried removing and modifying above code snippet but still cant get rid of port 83. I know this is something simple, but would be glad if someone can help.
I modified as <VirtualHost *:83> also <VirtualHost 127.0.0.1:83> and restarted XAMPP also modified NameVirtualHost *:83 but no use.
I made a subdomain on Localhost over Xampp with following code in httpd-vhosts.conf (guide from different sources)
NameVirtualHost *:80 (uncommented by removing #)
<VirtualHost *:80>
DocumentRoot C:/xampp/htdocs
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot C:/xampp/htdocs/sub
ServerName sub.localhost.com
</VirtualHost>
and following code into hosts of Windows/System32/drivers/etc/
127.0.0.1 localhost
127.0.0.1 sub.localhost
now the problem is subdomains are not working. One more thing I just noticed that when I start apache service in Xampp Control Panel, it has set the port as 80,443 for Apache which is good but as soon as I hit localhost in browser it changes port to different ports like 52352 etc. I also tried to setting up code in hosts file as
127.0.0.1:80 localhost
127.0.0.1:80 sub.localhost
but not working. I tried many other things but all in vein. While a month before I created successfully in the same Xampp Installation. off course i have created sub directory in htdocs.
Make sure you have this line uncommented in httpd.conf
#Include conf/extra/httpd-vhosts.conf
Remove this line in httpd-vhosts.conf (or comment it out):
NameVirtualHost *:80
Make sure you have a blank line at the end of both httpd-vhosts.conf and hosts, and make sure you're using tabs to separate IPs with their associated domains in the hosts file.
Make sure another application is not using ports 80, 443 (Skype for example).
Ultimately, restart your Apache server.
If you want to create sub directory, *emphasized text*127.0.0.1:80 localhost*emphasized text*
the settings back to original and change only *emphasized text*DocumentRoot C:/xampp/htdocs/sub*emphasized text*
I have an apache server installed on my portable windows 7 machine using xampp as an interface. I've been working with a few people on an irc channel but must soon go to bed and replies are getting slower.
I have the following code added to my httpd.conf file:
#virtual servers
#Listen 80
NameVirtualHost *:80
<VirtualHost *:80>
ServerName localhost.MEALS
DocumentRoot C:\xampp\htdocs\MEALS
DirectoryIndex index.php
</VirtualHost>
<VirtualHost *:80>
ServerName localhost.HA
DocumentRoot C:\xampp\htdocs\Hackers
DirectoryIndex index.php
</VirtualHost>
<VirtualHost *:80>
ServerName localhost.WIK
DocumentRoot C:\xampp\htdocs\WhoIKnow
DirectoryIndex index.php
</VirtualHost>
<VirtualHost *:80>
ServerName localhost.TUS
DocumentRoot C:\xampp\htdocs\Unity
DirectoryIndex index.php
</VirtualHost>
<VirtualHost *:80>
ServerName localhost.PHP
DocumentRoot C:\xampp\htdocs\phpMyAdmin
DirectoryIndex index.php
</VirtualHost>
And I have the following configuration:
Setting environment for using XAMPP for Windows.
John#ASSIMILATER C:\xampp
# httpd -S
VirtualHost configuration:
wildcard NameVirtualHosts and _default_ servers:
_default_:443 localhost (C:/xampp/apache/conf/extra/httpd-ssl.conf:80)
*:80 is a NameVirtualHost
default server localhost.MEALS (C:/xampp/apache/to which there was conf/httpd.conf:512)
port 80 namevhost localhost.MEALS (C:/xampp/apache/conf/httpd.conf:512)
port 80 namevhost localhost.HA (C:/xampp/apache/conf/httpd.conf:516)
port 80 namevhost localhost.WIK (C:/xampp/apache/conf/httpd.conf:520)
port 80 namevhost localhost.TUS (C:/xampp/apache/conf/httpd.conf:524)
port 80 namevhost localhost.PHP (C:/xampp/apache/conf/httpd.conf:528)
Syntax OK
John#ASSIMILATER C:\xampp
#
However when I try to access localhost.PHP in my web browser it tells me the server is not found. I was instructed that I need to resolve the host names on my machine. I was directed to a few irc channels (dns and windows) to which there was no reply. I searched google and ran across this site: http://technet.microsoft.com/en-us/library/bb727005.aspx#EEAA. I'm not quite sure what I'm reading and as near as I can tell it doesn't quite give me a clear instruction on where to resolve the host name or a file to edit.
Also currently the default server is the top virtual server in the code. I would like to call localhost and show a simple html page I created which is in "htdocs/index.html" which will navigate to the other servers (links pointing to "localhost.PHP" etc). is there a way to have the default server remain "localhost" which points to "htdocs/index.html" while maintaining the other virtual servers, or will I have to create another virtual server and make that the default?
Any and all help appreciated.
edit: I had someone help me find the HOSTS file on my machine but am unable to edit it. I turned off all antivirus features, turned off spybot (UAC was always off and I always run with administrator privileges) specifically right clicked on np++ editpadlite and windows notepad and was only able to edit in notepad, but was required to save the file with a different name.
You have to explicitly run Notepad as an administrator (regardless of UAC settings) and when you go to save, make sure you select 'all files' rather than the default *.txt.
I found the same thing when I tried to edit the hosts file on W7, but it seems that just being an administrator on the machine isn't quite the same as explicitly running the program as an administrator.