Is there a command in teradata that returns which column in a table has been defined as the primary index? I didn't make some of the tables im working off of and trying to optimize my joins against those tables. Thanks!
There's dbc.IndicesV, where IndexNumber=1 indicates the PI and dbc.PartitioningConstraintsV for partitioning information.
For a single table Iprefer SHOW TABLE tab; because you get the full DDL including indexes & datatypes.
If you DBA's allow it you might also try SHOW SELECT .... to get the DDL od all obects used by that select.
You can query DBC table to get this info..
SELECT
databasename, tablename, columnname, indextype, indexnumber, indexname
FROM
dbc.indices
I have a sql table that I am trying to add a column from another table to. Only when I execute the alter table query it does not pull the values out of the table to match the column where I am trying to make the connection.
For example I have column A from table 1 and column A from table 2, they are supposed to coincide. ColumnATable1 being an identification number and ColumnATable2 being the description.
I tried this but got an error...
alter table dbo.CommittedTbl
add V_VendorName nvarchar(200)
where v_venkey = v_vendorno
It tells me that I have incorrect syntax... Anyone know how to accomplish this?
alter table dbo.CommittedTbl
add V_VendorName nvarchar(200);
go
update c
set c.V_VendorName = a.V_VendorName
from CommittedTbl c
join TableA a
on c.v_venkey = a.v_vendorno;
go
I'm just guessing at your structure here.
alter table 2 add column A <some_type>;
update table2 set column A = (select column_A from table2 where v_venkey = v_vendorno);
Your names for tables and columns are a bit confusing but I think that should do it.
There is no WHERE clause for an ALTER TABLE statement. You will need to add the column (your first two lines), and then insert rows based upon a relationship you define between the two tables.
ALTER TABLE syntax:
http://msdn.microsoft.com/en-us/library/ms190273%28v=sql.90%29.aspx
There are several languages within SQL:
DDL: Data Definition Language - this defines the schema (the structure of tables, columns, data types) - adding a column to a table affects the table definitions and all rows will have that new column (not just some rows according to a criteria)
DML: Data Manipulation Language - this affects data within a table, and inserting, updating or other changes fall into this and you can update some data according to criteria (and this is where a WHERE clause would come in)
ALTER is a DDL statement, while INSERT and UPDATE are DML statements.
The two cannot really be mixed as you are doing.
You should ALTER your table to add the column, then INSERT or UPDATE the column to include appropriate data.
Is it possible that you want a JOIN query instead? If you want to join two tables or parts of two tables you should use JOIN.
have a look at this for a start if you need to know more LINK
hope that helps!
I need to add a Column "CurrentLifeCycleId" [int] into 73 tables and also add a Foreign Key from this new column to another single table "LifeCycle" Id column...is there a simple way I can do this in a few statements rather than go through each table one by one.
The column does not need to start off being NULL as I will delete all records from these tables before I start.
It's the weekend and I don't want to spend all today doing this :)
Thanks in advance.
Use SQL to built a script:
SELECT N'ALTER TABLE ' +quotename(name)+N' ADD COLUMN CurrentLifeCycleId (int) null;
alter table '+quotename(name)+N' ADD CONSTRAINT fk_LifeCycleId
(CurrentLifeCycleId ) references other_table (LifeCycleId);
'
FROM sys.tables where name in ('table1', 'table2', ..., 'table73');
Press Ctrl-T to push have results as text, execute in SSMS, select the result and paste it into a new query window. There are fabcier ways (like PowerShell), but this is fairly easy and straight forward. If the tables ar ein differnet schema, make sure you add that too into the script output.
Also make sure the script is correct before running it :)
How to change column order in a table using SQL query in SQL Server 2005?
I want to rearrange column order in a table using SQL query.
You cannot. The column order is just a "cosmetic" thing we humans care about - to SQL Server, it's almost always absolutely irrelevant.
What SQL Server Management Studio does in the background when you change column order there is recreating the table from scratch with a new CREATE TABLE command, copying over the data from the old table, and then dropping it.
There is no SQL command to define the column ordering.
You have to explicitly list the fields in the order you want them to be returned instead of using * for the 'default' order.
original query:
select * from foobar
returns
foo bar
--- ---
1 2
now write
select bar, foo from foobar
bar foo
--- ---
2 1
according to https://learn.microsoft.com/en-us/sql/relational-databases/tables/change-column-order-in-a-table
This task is not supported using Transact-SQL statements.
Well, it can be done, using create/ copy / drop/ rename, as answered by komma8.komma1
Or you can use SQL Server Management Studio
In Object Explorer, right-click the table with columns you want to reorder and click Design (Modify in ver. 2005 SP1 or earlier)
Select the box to the left of the column name that you want to reorder. (You can select multiple columns by holding the [shift] or
the [ctrl] keys on your keyboard.)
Drag the column(s) to another location within the table.
Then click save. This method actually drops and recreates the table, so some errors might occur.
If Change Tracking option is enabled for the database and the table, you shouldn't use this method.
If it is disabled, the Prevent saving changes that require the table re-creation option should be cleared in Tools menu > Options > Designers, otherwise "Saving changes is not permitted" error will occur.
Disabling the Prevent saving changes that require the table re-creation option is strongly advised against by Microsoft, as it leads to the existing change tracking information being deleted when the table is re-created, so you should never disable this option if Change Tracking is enabled!
Problems may also arise during primary and foreign key creation.
If any of the above errors occurs, saving fails which leaves you with the original column order.
In SQLServer Management Studio:
Tools -> Options -> Designers -> Table and Database Designers
Unselect 'Prevent saving changes that require table re-creation'.
Then:
right click the table you want to re-order the columns for.
click 'Design'.
Drag the columns to the order you want.
finally, click save.
SQLServer Management studio will drop the table and recreate it using the data.
This is similar to the question on ordering the records in the result of a query .. and typically no one likes the formally correct answer ;-)
So here it goes:
as per SQL standard, the columns in a table are not "ordered"
as a result, a select * does not force the columns to be returned in a particular order
typically, each RDBMS has a kind of "default" order (usually the order that the columns were added to the table, either in the create table' or in thealter table add ` statements
therefore, if you rely on the order of columns (because you are using the results of a query to poulate some other datastructure from the position of the columns), explicitly list the columns in the order you want them.
You can of course change the order of the columns in a sql statement. However if you want to abstract tables' physical column order, you can create a view. i.e
CREATE TABLE myTable(
a int NULL,
b varchar(50) NULL,
c datetime NULL
);
CREATE VIEW vw_myTable
AS
SELECT c, a, b
FROM myTable;
select * from myTable;
a b c
- - -
select * from vw_myTable
c a b
- - -
You can do it by creating a new table, copy all the data over, drop the old table, then renaming the new one to replace the old one.
You could also add new columns to the table, copy the column by column data over, drop the old columns, then rename new columns to match the old ones. A simple example below:
http://sqlfiddle.com/#!3/67af4/1
CREATE TABLE TestTable (
Column1 INT,
Column2 VARCHAR(255)
);
GO
insert into TestTable values(1, 'Test1');
insert into TestTable values(2, 'Test2');
GO
select * from TestTable;
GO
ALTER TABLE TestTable ADD Column2_NEW VARCHAR(255);
ALTER TABLE TestTable ADD Column1_NEW INT;
GO
update TestTable
set Column1_NEW = Column1,
Column2_NEW = Column2;
GO
ALTER TABLE TestTable DROP COLUMN Column1;
ALTER TABLE TestTable DROP COLUMN Column2;
GO
sp_rename 'TestTable.Column1_NEW', 'Column1', 'COLUMN';
GO
sp_rename 'TestTable.Column2_NEW', 'Column2', 'COLUMN';
GO
select * from TestTable;
GO
In SQLServer Management Studio:
Tools -> Options -> Designers -> Table and Database Designers
Unselect Prevent saving changes that require table re-creation.
Now you can reorder the table.
Sql server internally build the script. It create a temporary table with new changes and copy the data and drop current table then recreate the table insert from temp table. I find it from "Generate Change script" option ssms 2014. Script like this. From Here: How to change column order in a table using sql query
BEGIN TRANSACTION
SET QUOTED_IDENTIFIER ON
SET ARITHABORT ON
SET NUMERIC_ROUNDABORT OFF
SET CONCAT_NULL_YIELDS_NULL ON
SET ANSI_NULLS ON
SET ANSI_PADDING ON
SET ANSI_WARNINGS ON
COMMIT
BEGIN TRANSACTION
GO
CREATE TABLE dbo.Tmp_emps
(
id int NULL,
ename varchar(20) NULL
) ON [PRIMARY]
GO
ALTER TABLE dbo.Tmp_emps SET (LOCK_ESCALATION = TABLE)
GO
IF EXISTS(SELECT * FROM dbo.emps)
EXEC('INSERT INTO dbo.Tmp_emps (id, ename)
SELECT id, ename FROM dbo.emps WITH (HOLDLOCK TABLOCKX)')
GO
DROP TABLE dbo.emps
GO
EXECUTE sp_rename N'dbo.Tmp_emps', N'emps', 'OBJECT'
GO
COMMIT
If your table has enough columns then you can try this. First create a new table with preferred order of columns.
create table new as select column1,column2,column3,....columnN from table_name;
Now drop the table using drop command
drop table table_name;
now rename the newly created table to your old table name.
rename new to table_name;
now select the table, you have your columns rearranged as you preferred before.
select * from table_name;
Not sure if still relevant, but SSMS can generate a change scripts for this.
Re-order (drag the column) the table in Designer View
Click on 'Generate Change Script'
The generated script contains the script which does the following:
Create a temporary table
Adds the constraints, relationships and triggers from original table to temporary table
Drop original table
Rename temporary table to original table name
If you have not yet added any data into your table yet, there is one way to move the columns around.
Try this:
In SSMS, click Tools > Options > Designers > Table and Database Designers > Uncheck the box next to Prevent saving changes that require table re-creation > Click OK.
In the object tree, right-click on your table and select Design > in the thin column to the left of the Column Name column, you can click and drag the columns around to wherever you want them. When you're done, just go to close the Design tab and SSMS will ask you if you want to save your changes, click OK.
Optional:
3. Re-enable the checkbox for the option from Step 1 to re-secure your table.
Hope this helps someone!
Credit goes to Microsoft:
https://learn.microsoft.com/en-us/troubleshoot/sql/ssms/error-when-you-save-table#more-information
At the end of the day, you simply cannot do this in MS SQL. I recently created tables on the go (application startup) using a stored Procedure that reads from a lookup table. When I created a view that combined these with another table I had manually created earlier one (same schema, with data), It failed - simply because I was using ''Select * UNION Select * ' for the view. At the same time, if I use only those created through the stored procedure, I am successful.
In conclusion: If there is any application which depends on the order of column it is really not good programming and will for sure create problems in the future. Columns should 'feel' free to be anywhere and be used for any data process (INSERT, UPDATE, SELECT).
You can achieve it with these steps:
remove all foreign keys and primary key of the original table.
rename the original table.
using CTAS create the original table in the order you want.
drop the old table.
apply all constraints back to the original table
If the columns to be reordered have recently been created and are empty, then the columns can be deleted and re-added in the correct order.
This happened to me, extending a database manually to add new functionality, and I had missed a column out, and when I added it, the sequence was incorrect.
After finding no adequate solution here I simply corrected the table using the following kind of commands.
ALTER TABLE tablename DROP COLUMN columnname;
ALTER TABLE tablename ADD columnname columntype;
Note: only do this if you don't have data in the columns you are dropping.
People have said that column order does not matter. I regularly use SQL Server Management Studio "generate scripts" to create a text version of a database's schema. To effectively version control these scripts (git) and to compare them (WinMerge), it is imperative that the output from compatible databases is the same, and the differences highlighted are genuine database differences.
Column order does matter; but just to some people, not to everyone!
Use
SELECT * FROM TABLE1
which displays the default column order of the table.
If you want to change the order of the columns.
Specify the column name to display correspondingly
SELECT COLUMN1, COLUMN5, COLUMN4, COLUMN3, COULMN2 FROM TABLE1
you can use indexing.. After indexing, if select * from XXXX results should be as per the index, But only result set.. not structrue of Table
In order to have a specific column order You need to select column by column in the order You wish.
Selection order dictates how columns will be ordered in output.
Try this command:
alter table students modify age int(5) first;
This will change the position of age to the first position.
You can change this using SQL query. Here is sql query to change the sequence of column.
ALTER TABLE table name
CHANGE COLUMN `column1` `column1` INT(11) NOT NULL COMMENT '' AFTER `column2`;
alter table name modify columnname int(5) first;
will bring the column to first
alter table name modify columnname int(5) after (tablename);
This worked for me on Oracle DB:
select column1, column2, t.* from table t
Example: Change position of field_priority after field_price in table status.
ALTER TABLE `status` CHANGE `priority` `priority` INT(11) NULL DEFAULT NULL AFTER `price`;