The application I test has some areas where it requires unique data. Specifically, the application will generate a request number that can only be used once. After my test runs I must manually update my datapool reference for this number. Is there any way using java, that I can get the information stored in my datapool, increase the value by one, and then save the data back to the datapool. This way I can keep rft in sync with my application in regard to this number.
Here is an example how to read a value from the datapool, increment it by 1, and save it back to the datapool. It is an adapted example from the book Software Test Engineering with IBM Rational Functional Tester. The original source code is from chapter 5 (and can be downloaded from the book's homepage).
// some imports
import org.eclipse.hyades.edit.datapool.IDatapoolCell;
import org.eclipse.hyades.edit.datapool.IDatapoolEquivalenceClass;
import org.eclipse.hyades.execution.runtime.datapool.IDatapool;
import org.eclipse.hyades.execution.runtime.datapool.IDatapoolRecord;
int value = dpInt("value");
value++;
java.io.File dpFile = new java.io.File((String) getOption(IOptionName.DATASTORE), "SomeDatapool.rftdp");
IDatapool dp = dpFactory().load(dpFile, true);
IDatapoolEquivalenceClass equivalenceClass = (IDatapoolEquivalenceClass) dp.getEquivalenceClass(dp
.getDefaultEquivalenceClassIndex());
IDatapoolRecord record = equivalenceClass.getRecord(0);
IDatapoolCell cell = (IDatapoolCell) record.getCell(0);
cell.setCellValue(value);
DatapoolFactory factory = DatapoolFactory.get();
factory.save((org.eclipse.hyades.edit.datapool.IDatapool) dp);
I think it is quite a lot of code to simply change one value—maybe it is easier to use some other method like writing the value to a normal text file.
Related
I'm working on a personal project and very new (learning as I go) to JSON, NiFi, SQL, etc., so forgive any confusing language used here or a potentially really obvious solution. I can clarify as needed.
I need to take the JSON output from a website's API call and insert it into a table in my MariaDB local server that I've set up. The issue is that the JSON data is nested, and two of the key pieces of data that I need to insert are used as variable key objects rather than values, so I don't know how to extract it and put it in the database table. Essentially, I think I need to identify different pieces of the JSON expression and insert them as values, but I'm clueless how to do so.
I've played around with the EvaluateJSON, SplitJSON, and FlattenJSON processors in particular, but I can't make it work. All I can ever do is get the result of the whole expression, rather than each piece of it.
{"5381":{"wind_speed":4.0,"tm_st_snp":26.0,"tm_off_snp":74.0,"tm_def_snp":63.0,"temperature":58.0,"st_snp":8.0,"punts":4.0,"punt_yds":178.0,"punt_lng":55.0,"punt_in_20":1.0,"punt_avg":44.5,"humidity":47.0,"gp":1.0,"gms_active":1.0},
"1023":{"wind_speed":4.0,"tm_st_snp":26.0,"tm_off_snp":82.0,"tm_def_snp":56.0,"temperature":74.0,"off_snp":82.0,"humidity":66.0,"gs":1.0,"gp":1.0,"gms_active":1.0},
"5300":{"wind_speed":17.0,"tm_st_snp":27.0,"tm_off_snp":80.0,"tm_def_snp":64.0,"temperature":64.0,"st_snp":21.0,"pts_std":9.0,"pts_ppr":9.0,"pts_half_ppr":9.0,"idp_tkl_solo":4.0,"idp_tkl_loss":1.0,"idp_tkl":4.0,"idp_sack":1.0,"idp_qb_hit":2.0,"humidity":100.0,"gp":1.0,"gms_active":1.0,"def_snp":23.0},
"608":{"wind_speed":6.0,"tm_st_snp":20.0,"tm_off_snp":53.0,"tm_def_snp":79.0,"temperature":88.0,"st_snp":4.0,"pts_std":5.5,"pts_ppr":5.5,"pts_half_ppr":5.5,"idp_tkl_solo":4.0,"idp_tkl_loss":1.0,"idp_tkl_ast":1.0,"idp_tkl":5.0,"humidity":78.0,"gs":1.0,"gp":1.0,"gms_active":1.0,"def_snp":56.0},
"3396":{"wind_speed":6.0,"tm_st_snp":20.0,"tm_off_snp":60.0,"tm_def_snp":70.0,"temperature":63.0,"st_snp":19.0,"off_snp":13.0,"humidity":100.0,"gp":1.0,"gms_active":1.0}}
This is a snapshot of an output with a couple thousand lines. Each of the numeric keys that you see above (5381, 1023, 5300, etc) are player IDs for the following stats. I have a table set up with three columns: Player ID, Stat ID, and Stat Value. For example, I need that first snippet to be inserted into my table as such:
Player ID Stat ID Stat Value
5381 wind_speed 4.0
5381 tm_st_snp 26.0
5381 tm_off_snp 74.0
And so on, for each piece of data. But I don't know how to have NiFi select the right pieces of data to insert in the right columns.
I believe that it's possible to use jolt to transform your json into a format:
[
{"playerId":"5381", "statId":"wind_speed", "statValue": 0.123},
{"playerId":"5381", "statId":"tm_st_snp", "statValue": 0.456},
...
]
then use PutDatabaseRecord with json reader.
Another approach is to use ExecuteGroovyScript processor.
Add new parameter to it with name SQL.mydb and link it to your DBCP controller service
And use the following script as Script Body parameter:
import groovy.json.JsonSlurper
import groovy.json.JsonBuilder
def ff=session.get()
if(!ff)return
//read flow file content and parse it
def body = ff.read().withReader("UTF-8"){reader->
new JsonSlurper().parse(reader)
}
def results = []
//use defined sql connection to create a batch
SQL.mydb.withTransaction{
def cmd = 'insert into mytable(playerId, statId, statValue) values(?,?,?)'
results = SQL.mydb.withBatch(100, cmd){statement->
//run through all keys/subkeys in flow file body
body.each{pid,keys->
keys.each{k,v->
statement.addBatch(pid,k,v)
}
}
}
}
//write results as a new flow file content
ff.write("UTF-8"){writer->
new JsonBuilder(results).writeTo(writer)
}
//transfer to success
REL_SUCCESS << ff
I have an Excel file in which are given more then 2000 organisms, where each one of them has a Bioproject ID associated (like PRJNA12997). The idea is to use these IDs to get the sequence for a later multiple alignment with other five sequences that I have in a text file.
Can anyone help me understand how I can do this using biopython? At least the part with the bioproject ID.
You can first get the info using Bio.Entrez:
from Bio import Entrez
Entrez.email = "Your.Name.Here#example.org"
# This call to efetch fails sometimes with a 400 error.
handle = Entrez.efetch(db="bioproject", id="PRJNA12997")
I've been trying, and Entrez.read(handle) doesn't seems to work. But if you do record_xml = handle.read() you'll get the XML entry for this record. In this XML you can get the ID for the organism, in this case 12997.
handle = Entrez.esearch(db="nuccore", term="12997[BioProject]")
search_results = Entrez.read(handle)
Now you can efecth from your search results. At this point you should use Biopython to parse whatever you will get in the efetch step, playing with the rettype http://www.ncbi.nlm.nih.gov/books/NBK25499/table/chapter4.T._valid_values_of__retmode_and/
for result in search_results["IdList"]:
entry = Entrez.efetch(db="nuccore", id=result, rettype="fasta")
this_seq_in_fasta = entry.read()
I have problems to read the error codes and corresponding messages of SCI message classes.
Is there an way to easy access those?
I'm using "Praxishandbuch SAP Code Inspector" as a reference, but in that regard it is of no help.
I looked in Se11 but the information to the messages isn't helpful.
Has someone an approch to build such a table?
You can try this, perhaps it will work for you. I use the code below to get the access to all the errors found by Code Inspector for particular user(s):
data: ref_inspec_a type ref to cl_ci_inspection.
ref_inspec_a = cl_ci_inspection=>get_ref(
p_user = pa_iuser
p_name = pa_inam
p_vers = pa_ivers ).
data: ls_resp type scir_resp,
lt_resp type scit_resp.
clear: ls_resp, lt_resp.
ls_resp-sign = 'I'.
ls_resp-option = 'EQ'.
ls_resp-low = pa_fuser.
insert ls_resp into table lt_resp.
call method ref_inspec_a->get_results
exporting
p_responsibl = lt_resp
exceptions
insp_not_yet_executed = 1
overflow = 2
others = 3.
Playing around with LT_RESP you can get results for more users at the same time.
After you execute the code above, you can check the attributes SCIRESTPS and SCIRESTHD of the object REF_INSPEC_A. These are the large tables, which contain the result data of the SCI check. You can either work with them on your own, or you can simply pass the object REF_INSPEC_A into the function module SCI_SHOW_RESULTS to get regular SCI user interface.
I found out that you can get all the changeable messages (found in SCI GoTo/Management Of/ Message Priorities) can be read from the scimessages attribute of the test classes.
With this help you can get about 60% of all errors.
This seems like it should be simple, but I have spent literally hours without any success.
Take the D3 graph example at http://bl.ocks.org/mbostock/950642. The example uses a local file called graph.json. I have set up a Rails app to serve a similar graph, however I don't want to write a file of the JSON. Rather, I generate the nodes and links into an object such as:
{"nodes":[{"node_type":"Person","name":"Damien","id":"damien_person"}, {"node_type":"Person","name":"Grant","id":"grant_person"}}],
"links":[{"source":"damien_person","target":"grant_person","label":"Friends"}}
Now when I render the D3, I need to update the call d3.json("graph.json", function(json) {...}); to reference my in-memory object rather than the local file (or url). However, everything I've tried breaks my html/javascript. For example I tried setting the var dataset = <%= raw(#myInMemoryObject) %>;, and that works for assignment (I did an alert on the dataset), however I can't get the D3 code to use it.
How can I replace the d3.json call in order to use my in-memory object?
Thank you,
Damien
Your idea of using, for example, var dataset = <%= raw(#myInMemoryObject) %>; is the right way to go but you need to prep your object to be in the right format.
The nodes specified in the links need to either be numeric references to nodes in the nodes array eg. 0 for first, 1 for second
var json ={
"nodes":[{"name":"Damien","id":"a"}, {"name":"Bob","id":"b"}],
"links":[{"source":0, "target":1,"value":1}]
}
or links to the actual objects which make the nodes themselves:
var a = {"name":"Damien","id":"a"};
var b = {"name":"Bob","id":"b"}
var json ={
"nodes":[a,b],
"links":[{"source":a,"target":b,"value":1}]
};
Relevant discussion is here: https://groups.google.com/forum/?fromgroups=#!topic/d3-js/LWuhBeEipz4
Example here: http://jsfiddle.net/5A9eV/1/
I recorded one script using Selenium IDE which contain clicking on a link and now i want to add loop to run same script multiple time, for this i am converting script to python but unable to add loop.Please help me in this regards.
Heres some text direct from selenium docs:
Data Driven Testing:
Data Driven Testing refers to using the same test (or tests) multiple times with varying data. These data sets are often from external files i.e. .csv file, text file, or perhaps loaded from a database. Data driven testing is a commonly used test automation technique used to validate an application against many varying input. When the test is designed for varying data, the input data can expand, essentially creating additional tests, without requiring changes to the test code.
# Collection of String values
source = open("input_file.txt", "r")
values = source.readlines()
source.close()
# Execute For loop for each String in the values array
for search in values:
sel.open("/")
sel.type("q", search)
sel.click("btnG")
sel.waitForPageToLoad("30000")
self.failUnless(sel.is_text_present("Results * for " + search))
Hope it helps. More info at: Selenium Documentation
Best Regards,
Paulo Bueno.
Try a loop similar to this example using "for x in range (0,5):" to set the number of times you wish it to iterate.
def test_py2webdriverselenium(self):
for x in range(0,5):
driver = self.driver
driver.get("http://www.bing.com/")
driver.find_element_by_id("sb_form_q").click()
driver.find_element_by_id("sb_form_q").clear()
driver.find_element_by_id("sb_form_q").send_keys("testing software")
driver.find_element_by_id("sb_form_go").click()
driver.find_element_by_link_text("Bing").click()
I tried this for some situations that I have little information:
list = [''' list containing all items ''']
index = 0
while True:
try:
# do what you want with list[index]
index += 1
except:
# index exception occured
break
In java you can do this as below:
# import packages or classes
public class testClassName(){
before test Methods(){
}
#Test
public void testMethod(){
for(int i =0, i<=5, i++){
WebElement element = driver.findElementById("link_ID");
element.click();
waitForPageLoaded(5);
}
}
after Test Method(){
}
}