Has anyone else had luck trying to ssh between two Nitrous.io boxes? For example:
Box 1: Hosting mongo & rails server
Box 2: AngularJS app that talks to rails API
I'd like to be able to ssh from Box 2 to Box 1r so I can tail the logs over there.
You may ask, why would I do such a thing? Basically my main dev laptop is having memory issues so I've been using a chromebook. Its actually not bad at all except for the lack of a proper terminal.
I've added the public key from Box 2 to Box 1. But it won't let me connect. Has anyone had any luck with this?
Currently you can SSH into a Nitrous box, but establishing an SSH connection from a Nitrous box to another is not supported. You may want to look into using WebSockets instead.
Related
I am having an issue when trying to open to any VMs using "Launch Web Console" option via the vcsa 6.7 . I was wondering if someone could please point me in the right direction?
My environment currently looks like this:
1) vcsa 6.7
2) Three Esxi (6.7) Hosts & multiple vms are running (including windows & Linux)
Whenever I try to connect to the console, I get the following error:
The console has been disconnected. Close this window and re-launch the console to reconnect.
Console access is given through a connection to the ESXi host.
Often times I receive this message when connected to the console of a VM which has vMotioned to another host. However, I can close and re-open the console just fine.
You may also want to verify that you can access port 902 (TCP & UDP) for each of your three hosts. Example of this requirement: https://docs.vmware.com/en/VMware-vSphere/6.0/com.vmware.vsphere.install.doc/GUID-5071C86E-FF1E-4E54-A424-A20917401160.html
I had the same exact problem and unfortunately, the solutions I found on the internet did not solve my problem. I had to re-check my settings and found out that the problem was the proxy setting was ticked on. which it won't allow you to connect to any others services as well if you are out of range of that proxy. The Solutions "FOR MAC USERS" as follows:
1-Go to your network settings.
2-From the menu down to the right-click more options. in my picture say (Weitere Optionen) "German".
3-From the menu on the left side make sure that the proxy option is 'unticked' (not chosen).
Then click on to confirm and enjoy using your VM service. Hope this would solve your problem as well as it did to mine.
See pictures!
https://i.stack.imgur.com/1PjjP.jpg
https://i.stack.imgur.com/1jnJf.jpg
https://i.stack.imgur.com/8XiAY.jpg
I am running a python machine learning script on google cloud platform. I have connected through SSH in browser. When I run the code it works, but when I close the browser it seems to stop running.
I believe I can make it run in the background with nohup, but I want to be able to check back in on it as it prints outputs on its progress.
Basically I want to be able to start the script, close the terminal and then reconnect from any machine to check on its progress. Any help would be really appreciated.
I am new to google cloud platform if any of this was unclear please as an ill try providing more detail.
You may use an app called as screen. Just install it using `sudo apt-get install screen`` (if debian, ubuntu).
In some cases it might be already installed in your instance, you may check it.
Once installed enter the following command into the terminal:
screen
and press enter. Now, You may start with your job in terminal.
The moment you need to disconnect you may press Ctrl+A and then d.
The session would be disconnected. You may note the session id that would be displayed (eg. detached from 1498.pts-1.server)
You may now close the terminal.
When you come back, use the following command to get back into the older session.
screen -r *screen_id* (eg. screen -r **1498.pts-1.server**)
This process is checked for google cloud, ssh through browser, it really works.
Check this site for mode details.
It sounds like you're referring to the Google Cloud Shell feature. If so then what you desire is not possible, the cloud shell is not intended for non-interactive operation. From Usage limits:
Cloud Shell is intended for interactive use only. Non-interactive
sessions will be ended automatically after a warning.
The cloud shell operates on a temporary Compute Engine virtual machine, which is running only while the cloud shell session is active in the browser.
Apart from the obvious approach of keeping the browser session active while your application is running, you could also provision yourself a non-temporary Compute Engine instance (a free one is available), to which you can connect and on which you can run non-interactive applications as you desire.
A really simple but dragged me many days that I cannot figure out how:
I've setup synergy on my Mac as a client, using Ubuntu as the server.
But now I wanted to switch to use Mac as server and Ubuntu as client.
The question now I'm facing is that synergy settings page never show up, each time I try to open it, it just appears in less than 0.1 second, then it disappeared.
Because I've set it up already and I don't need the reconfigure the Ip addresses etc.
This is convenient.
But now I wanted to switch server/client roles, I need to reconfigure it, however the settings page of synergy never shows up to let me configure it, does anyone have the same issue?
I tried to uninstall synergy on my Mac, but when I reinstall it back, it automatically configures itself again and quickly disappears and runs in the background.
It's been a pain for me.
You can't start the Server on Yosemite, because you need to grant access to the process (Synergy) to control your computer:
http://mizage.com/help/accessibility.html
doing that with Synergy should work.
I've been troubleshooting this for a while now and can't seem to find a solution. I have a remote LAMP server in my office and sometimes need to work from home. I use a SSHFS between my home computer and work to accomplish this.
However, I have run into an issue where when I update the local files, the changes get pushed to the server immediately as they should. I have verified that the changes are there via SSH and VIM. However, if I refresh and even force refresh the page in Chrome the changes do not appear.
I also created a local file which showed up immediately on the server and I could view in Chrome, but any subsequent changes to the file are not rendered.
Any time that I'm in the office the changes are rendered immediately as well.
Anybody have any ideas?
Apache 2.4.7
Sublime Text 3 Editor
Client SSHFS: win-sshfs 0.0.1.5
Server SSH: OpenSSH_6.6.1p1
My guess is that the modified time isn't updated correctly on the remote filesystem. I'm not so sure what would be the fix for this but this at least could be a first trail to follow?
In fact, I just did a little search around and found this bug : https://code.google.com/p/win-sshfs/issues/detail?id=99
With a possible workaround in Sublime 2, I'll let you check if there is such a setting in Sublime 3
When I browse the web with IE10 in win8's Metro part there is no problem but when I try to view page that is located on server in my local network(the same subnet) it displays this message:
This page can't be displayed
•Make sure the web address http://192.168.1.100 is correct.
•Look for the page with your search engine.
•Refresh the page in a few minutes.
If following these suggestions didn't work, resetting your connection might help.
Reset connection [<-a button here]
Get more help with connection problems
Now the funny part is that there is an option in metro version of ie10 to open page on desktop (in regular IE10) and than it works with no problem.
I can't find or think of any security setting that would restrict browsing websites inside your own local network.
(this is Windows 8 32Bit Release Preview build 8400)
Any ideas?
This is related to EPM (Enhanced Protected Mode) in IE10. It's hard to summarize in an answer here, but Eric Lawrence (a PM on the IE team) has an excellent post detailing everything about EPM:
http://blogs.msdn.com/b/ieinternals/archive/2012/03/23/understanding-ie10-enhanced-protected-mode-network-security-addons-cookies-metro-desktop.aspx
In particular, read the "Loopback-blocked" and "Private Network resources" sections.
In your case, you might try one of these approaches:
Try aliasing the dotted hostname (http://192.168.1.100) via a custom DNS entry (e.g. http://myservice)
Change the Trusted Zones settings
See if your network connection was established as sharing or non-sharing, which would trigger private vs. public mode.
Again, see Eric's post for the details of each of these.