select t1.key,t2.design,t1.price,t1.gender,t1.store
from table1 t1,table2 t2
where t1.key=t2.key;
This is my query. In this query, column KEY is distinct. I need result with distinct DESIGN values. Help me with this.
from table1 t1 join table2 t2 on t1.key = t2.key
where design like "specific design"
Your request is not precise. There are two things possible:
1) You are talking about duplicate records, i.e. for two records with the same design the columns key, price, gender and store are guaranteed to be equal. Two ways to solve it:
select DISTINCT t1.key,t2.design,t1.price,t1.gender,t1.store
from table1 t1,table2 t2
where t1.key=t2.key;
or
select t1.key,t2.design,t1.price,t1.gender,t1.store
from table1 t1, (select distinct key, design from table2) t2
where t1.key=t2.key;
2) You are talking of duplicate designs and ambigious information related, i.e. for two records for the same design you may get different prices etc. Then you must think about what information you want to get per design. The maximum price? The sum of prices? ...
select t1.key,t2.design,sum(t1.price),max(t1.gender),max(t1.store)
from table1 t1,table2 t2
where t1.key=t2.key
group by t1.key,t2.design;
This gives you records per key and design. If you want records per design only then you would group only by design and decide which key you want to show with it.
A last recommendation: Use explicit join syntax. It is easier to read and less error-prone.
select t1.key, t2.design, t1.price, t1.gender, t1.store
from table1 t1
inner join table2 t2 on t1.key = t2.key;
Related
I have a query that I'm trying to rework that has over 1,000 columns when I select * FROM several tables. I want to know if there is a way in SQL to tag the column alias with the table alias so i can know from which table the columns are from. It looks like the following:
SELECT *
FROM table1 t1
join table2 t2
join table3 t3
join table4 t4
Current column output:
id, id, id, id, name, name, name, name, order, order, order, order
Desired Column output:
t1.id, t1.name, t1.order, t2.id, t2.name, t2.order,t3.id, t3.name, t3.order, t4.id, t4.name, t4.order
this is a very simple example but you can imagine trying to fish out the column you need of a sea of 1,000 columns trying to figure out what table it came from! Any ideas??
I'm not aware of a way to prefix each column with the column alias. However I do know how you could easily break the columns into groups that would allow you to figure out which table each column comes from.
SELECT 'T1' as [Table1]
, t1.*
, 'T2' as [Table2]
, t2.*
, 'T3' as [Table3]
, t3.*
, t4.* as [Table4]
, t4.*
, 'T5' as [Table5]
, t5.*
FROM table1 t1
join table2 t2
join table3 t3
join table4 t4
This would break out the columns into groups by table and it would break a little bookmark before and after each group to help you understand where they're coming.
I know not exactly what you asked for but I believe it would help you a lot in figuring out what's from what tables.
Your other option is as others have said and specifiying the prefix on every column which it sounds like you don't want to do. However it can be a lot quicker to do this if you drag the columns from the Object Explorer - and use ALT-SHIFT to add the prefix to each column.
Here's an article about copying columns from object explorer - https://www.qumio.com/Blog/Lists/Posts/Post.aspx?ID=56
Her's an article about adjusting code using ALT+SHIFT - https://blogs.msdn.microsoft.com/sql_pfe_blog/2017/04/11/quick-tip-shiftalt-for-multiple-line-edits/
The first method would take less than a method, the 2nd method I could see taking less than 10 minutes even for 1,000 columns.
You have to assign non-default column aliases manually:
select t1.id as t1_id, t1.name as t1_name, t1.order as t1_order,
t2.id as t2_id, t2.name as t2_name, t2.order as t2_order,
. . .
You might find that a spreadsheet or query can help, if you have a lot of columns.
Some products may have exceptions, but generally no, you can't do that. You either have to use wildcards (SELECT *) or specify the columns you wish returned by full and complete name.
If you specify columns, you can "alias" them, set the column name to something other than the source name. For example (psuedo-code, leaving out the "ON" clause):
SELECT
T1.Id as T1_Id
,T2.Id as T2_Id
from table1 T1
join table2 T2
Note that you can combine table aliases with wildcards. For example:
SELECT
T2.*
from table1 T1
join table2 T2
join table3 T3
join table4 T5
will return all the columns from table2, and only from table2. This might help in revising your query by getting a list of the available columns in each table.
I have two tables (Table1 and Table2) I am comparing. Each table has the same four columns: customerid, channeltreeid, producttreeid and consentstatusid. The customerid is what links each record in the tables, but there are cases where customerid is the same but there are different values in the other column. How can I find all such records (those where customerid is the same but at least one other column differs)?
I am enhancing the answer given by #TheImpaler to output ONLY the rows where there is a difference in one or more of the 3 last columns, as it is so I understand the requirements.
select
t1.customerid,
t1.channeltreeid, t1.producttreeid, t1.consentstatusid,
t2.channeltreeid, t2.producttreeid, t2.consentstatusid,
from table1 t1
join table2 t2 on t1.customerid = t2.customerid
where t1.channeltreeid <> t2.channeltreeid
or t1.producttreeid <> t2.producttreeid
or t1.consentstatusid <> t2.consentstatusid
A simple join will do:
select
t1.customerid,
t1.channeltreeid, t1.producttreeid, t1.consentstatusid,
t2.channeltreeid, t2.producttreeid, t2.consentstatusid,
from table1 t1
join table2 t2 on t1.customerid = t2.customerid
In any case, I really think this is a bad database modelling. You should revise and fix the model.
I am trying to write an SQL query that will return Table1, which has 10 columns. This table consists of a primary key id, 4 foreign key Id columns, and 5 other columns that I want to return but not change. The goal is to do a join to replace the foreign key Ids with their descriptions that are held in other tables.
Here is one attempt with the first FK Id:
Select * from Table1 t1
left join Table2 t2
on t1.BranchId = t2.BranchId;
This left join returns the description from table2, but does not replace it.
Here is another with the first FK Id:
Select t2.BranchName from Table1 t1
left join Table2 t2
on t1.BranchId = t2.BranchId;
This returns the name I want, but does not return table1 fully.
For the sake of an example you could pretend that OtherName3, OtherName4, OtherName5 are in tables Table3, Table4, Table5, respectively.
This may seem trivial for experienced SQL devs, but I am having a hard time figuring out the syntax.
Thanks!
I'm not sure what you mean by replace it.
I think you just need to list out all the columns you want:
Select t1.col1, t1.col2, t1.col3, . . .,
t2.name
from Table1 t1 left join
Table2 t2
on t1.BranchId = t2.BranchId;
I don't know what you mean by 'replace' but you just need to qualify what columns from which table you want. That goes for all tables you are joined to, especially if they have the same column name in multiple tables. I put junk columns in since I don't know your tables but you should get the general idea.
Select t2.BranchName, t1.BranchId, t1.Name, t1.Amount, t2.BranchLocation from Table1 t1
left join Table2 t2
on t1.BranchId = t2.BranchId;
I think this is what you are looking for:
select t1.*, t2.BranchName from Table1 t1
left join Table2 t2
on t1.BranchId = t2.BranchId;
Return Table1 fully (all columns) and only the description (BranchName) from Table2.
If using SQL Server, see all syntax options for the SELECT clause here:
https://msdn.microsoft.com/en-us/library/ms176104.aspx
I'm breaking my head here where I'm going wrong.
The following query:
SELECT SUM(table1.col1) FROM table1
returns value x.
And the following query:
SELECT SUM(table1.col1) FROM table2 RIGHT OUTER JOIN table1 ON table2.ID = table1.ID
returns value y. (I need the Join for the other data of table2). Why is the 2nd example returning a different value than in the first?
Make life easier on yourself, your colleagues that will support your code, and your clients by temporarily ignoring the existence of RIGHT OUTER JOIN. Use Table1 as the "from table" instead of table2.
Then, If aggregating, you will often find it necessary to do this BEFORE joining, so that the numbers are accurate. e.g.
SELECT T1.SUMCOL1
FROM (
SELECT id, SUM(col1) as SUMCOL1 FROM Table1 GROUP BY id
) T1
LEFT OUTER JOIN table2 T2 on T1.id = T2.ID
Obvious answer is because table2 is many to table1's one. That is, there are multiple rows in table2 for one id in table1. You may also be eliminating rows from table1 if the id isn't present in table2.
Compare:
SELECT COUNT(*) FROM table1
To:
SELECT COUNT(*) FROM table2 RIGHT OUTER JOIN table1 ON table2.ID = table1.ID
If you get different results, you're aggregating duplicates or eliminating rows from table1.
If you want to avoid this, you'll need to use a subquery.
I am a little confused as to how to approach this SQL query.
I have two tables (equal number of records), and I would like to return a column with which is the division between the two.
In other words, here is my not-working-correctly query:
SELECT( (SELECT v FROM Table1) / (SELECT DotProduct FROM Table2) );
How would I do this? All I want it a column where each row equals the same row in Table1 divided by the same row in Table2. The resulting table should have the same number of rows, but I am getting something with a lot more rows than the original two tables.
I am at a complete loss. Any advice?
It sounds like you have some kind of key between the two tables. You need an Inner Join:
select t1.v / t2.DotProduct
from Table1 as t1
inner join Table2 as t2
on t1.ForeignKey = t2.PrimaryKey
Should work. Just make sure you watch out for division by zero errors.
You didn't specify the full table structure so I will assume a common ID column to link rows in the tables.
SELECT table1.v/table2.DotProduct
FROM Table1 INNER JOIN Table2
ON (Table1.ID=Table2.ID)
You need to do a JOIN on the tables and divide the columns you want.
SELECT (Table1.v / Table2.DotProduct) FROM Table1 JOIN Table2 ON something
You need to substitue something to tell SQL how to match up the rows:
Something like: Table1.id = Table2.id
In case your fileds are both integers you need to do this to avoid integer math:
select t1.v / (t2.DotProduct*1.00)
from Table1 as t1
inner join Table2 as t2
on t1.ForeignKey = t2.PrimaryKey
If you have multiple values in table2 relating to values in table1 you need to specify which to use -here I chose the largest one.
select t1.v / (max(t2.DotProduct)*1.00)
from Table1 as t1
inner join Table2 as t2
on t1.ForeignKey = t2.PrimaryKey
Group By t1.v