I'd like to init a model, let the model do some async stuff and present a new viewcontroller once completed. But how do i wait for the two async methods to be completed and how do I setup the callback method?
Pseudocode
In my StartViewController.m:
-(void)openArticle
{
article = [Article initWithObject:someObject];
article.callback = changeView;
}
-(void)changeView
{
[self presentViewController:someController];
}
In my ArticleModel.m:
-(void)initWithObject:someObject
{
[self loadImage]
[self geoCode]
}
-(void)loadImage
{
runAsyncMethod: success:^() // This one is actually a AFNetworking setImageWithURLRequest
}
-(void)geoCode
{
runAnotherAsyncMethod: success:^() // This one is actually a geocodeAddressString operation
}
You can achieve this using dispatch_groups
- (void)initWithObject:(id)someObject
{
self = [super init];
if (self) {
self.dispatch_group = dispatch_group_create();
[self loadImage]
[self geoCode]
dispatch_group_notify(self.dispatch_group, dispatch_get_main_queue(), ^{
NSLog(#"Push new view controller");
});
}
return self;
}
- (void)loadImage
{
dispatch_group_enter(self.dispatch_group);
__weak __typeof(self) weakSelf = self;
runAsyncMethod: success:^{
__typeof(weakSelf) strongSelf = weakSelf;
if (strongSelf.dispatch_group) {
dispatch_group_leave(strongSelf.dispatch_group); // You need to ensure that this is called in both success and failure
}
}
}
- (void)geoCode
{
dispatch_group_enter(self.dispatch_group);
__weak __typeof(self) weakSelf = self;
runAnotherAsyncMethod: success:^{
__typeof(weakSelf) strongSelf = weakSelf;
if (strongSelf.dispatch_group) {
dispatch_group_leave(strongSelf.dispatch_group);
}
}
}
You do not wait. If you wait, it isn't asynchronous! You would be losing the entire point of asynchronous if you were to wait.
What you do is, when your success handler is called, you step out to the main thread (just in case you got called back on a background thread) and now do whatever you need to do. In other words, you just let your success handler get called whenever it happens to get called.
In your case, you might like to chain the things you want to do:
Call loadImage
In its callback, call geoCode
In its callback, step out to the main thread and present the new view controller.
You can use dispatch_group so that when a method is over, it just leaves the group. I use a similar code myself and it works like a charm.
- (void)initWithObject:someObject {
// Create a dispatch group
dispatch_group_t group = dispatch_group_create();
[self loadImageWithDispatchGroup:group];
[self geoCodeWithDispatchGroup:group];
// Here we wait for all the requests to finish
dispatch_group_notify(group, dispatch_get_main_queue(), ^{
// Do whatever you need to do when all requests are finished
});
}
- (void)loadImageWithDispatchGroup:(dispatch_group_t)group {
dispatch_group_enter(group);
runAsyncMethod: success:^() // This one is actually a AFNetworking setImageWithURLRequest
// In your success or failure AFNetworking method, call this as soon as the request ended
dispatch_group_leave(group);
}
- (void)geoCodeWithDispatchGroup:(dispatch_group_t)group {
dispatch_group_enter(group);
runAnotherAsyncMethod: success:^() // This one is actually a geocodeAddressString operation
// In your success async geocode callback method, call this as soon as the request ended
dispatch_group_leave(group);
}
I do not known your needs but native GCD way to wait several asynch tasks is
void dispatch_barrier_async(dispatch_queue_t queue, dispatch_block_t block);
https://developer.apple.com/library/ios/documentation/Performance/Reference/GCD_libdispatch_Ref/Reference/reference.html#//apple_ref/c/func/dispatch_barrier_async
Related
I have a XCTTestClass that has an asynchronous setup method. It will take some amount of time (has to parse files, insert them in a bd, etc) and I want to make sure my tests only run after this setup is done.
How can I do this?
You can use semaphores to wait till you get the results back from your async call.
dispatch_semaphore_t semaphore = dispatch_semaphore_create(0);
// Do your async call here
// Once you get the response back signal:
[self asyncCallWithCompletionBlock:^(id result) {
dispatch_semaphore_signal(semaphore);
}];
dispatch_semaphore_wait(semaphore, DISPATCH_TIME_FOREVER);
In your -setup method use either a semaphore as above or use dispatch_group. dispatch_group is my preferred approach.
#implementation XCTTestSubClass()
{
dispatch_group_t _dispatchGroup;
}
#end
-(id)init
{
_dispatchGroup = dispatch_group_create();
return [super init];
}
-(void)setup
{
dispatch_group_async(_dispatchGroup, dispatch_get_current_queue(), ^{
//your setup code here.
});
}
Then override -invokeTest and make sure the group blocks(setup) is done running.
-(void)invokeTest
{
dispatch_group_notify(group, dispatch_get_current_queue(), ^{
[super invokeTest];
});
}
This guarantees that the tests will run only after -setup is completed.
I'm writing a mac app that runs its own web server, using the GCDWebServer library (https://github.com/swisspol/GCDWebServer). My app delegate handles GET requests like so:
__weak typeof(self) weakSelf = self;
[webServer addDefaultHandlerForMethod:#"GET"
requestClass:[GCDWebServerRequest class]
processBlock:^GCDWebServerResponse *(GCDWebServerRequest* request) {
return [weakSelf handleRequest:request];
}];
And then the handleRequest method returns the response data, something like:
return [GCDWebServerDataResponse responseWithHTML:#"<html><body><p>Hello World!</p></body></html>"];
So far so good. Except now I want the handleRequest method to use NSSpeechSynthesizer to create an audio file with some spoken text in it, and then wait for the speechSynthesizer:didFinishSpeaking method to be called before returning to the processBlock.
// NSSpeechSynthesizerDelegate method:
- (void)speechSynthesizer:(NSSpeechSynthesizer *)sender didFinishSpeaking:(BOOL)success
{
NSLog(#"did finish speaking, success: %d", success);
// return to processBlock...
}
Problem is, I have no idea how to do this. Is there a way to return from the speechSynthesizer:didFinishSpeaking method into the processBlock defined above?
You need to run the speech synthesizer on a separate thread with its own run loop, and use a lock to allow your request thread to wait for the operation to complete on the speech thread.
Assuming the web server maintains its own thread(s) and runloop, you can use your app's main thread to run the speech synthesizer, and you can use NSCondition to signal completion to the web response thread.
A basic (untested) example (without error handling):
#interface SynchroSpeaker : NSObject<NSSpeechSynthesizerDelegate>
- (id)initWithText:(NSString*)text outputUrl:(NSURL*)url;
- (void)run;
#end
#implementation SynchroSpeaker
{
NSCondition* _lock;
NSString* _text;
NSURL* _url;
NSSpeechSynthesizer* _synth;
}
- (id)initWithText:(NSString*)text outputUrl:(NSURL*)url
{
if (self = [super init])
{
_text = text;
_url = url;
_lock = [NSCondition new];
}
return self;
}
- (void)run
{
NSAssert(![NSThread isMainThread], #"This method cannot execute on the main thread.");
[_lock lock];
[self performSelectorOnMainThread:#selector(startOnMainThread) withObject:nil waitUntilDone:NO];
[_lock wait];
[_lock unlock];
}
- (void)startOnMainThread
{
NSAssert([NSThread isMainThread], #"This method must execute on the main thread.");
[_lock lock];
//
// Set up your speech synethsizer and start speaking
//
}
- (void)speechSynthesizer:(NSSpeechSynthesizer *)sender didFinishSpeaking:(BOOL)success
{
//
// Signal waiting thread that speaking has completed
//
[_lock signal];
[_lock unlock];
}
#end
It's used like so:
- (id)handleRequest:(id)request
{
SynchroSpeaker* speaker = [[SynchroSpeaker alloc] initWithText:#"Hello World" outputUrl:[NSURL fileURLWithPath:#"/tmp/foo.dat"]];
[speaker run];
////
return response;
}
GCDWebServer does run into its own threads (I guess 2 of them) - not in the main one. My solution needed to run code in Main Thread when calling the ProcessBlock.
I found this way that suits my needs:
First declare a weak storage for my AppDelegate: __weak AppDelegate *weakSelf = self;. Doing so I can access all my properties within the block.
Declare a strong reference to AppDelegate from within the block like so: __strong AppDelegate* strongSelf = weakSelf;
Use NSOperationQueue to align the operation on mainThread:
[[NSOperationQueue mainQueue] addOperationWithBlock:^ {
//Your code goes in here
NSLog(#"Main Thread Code");
[strongSelf myMethodOnMainThread];
}];
In this way myMethodOnMainThread surely will run where it's supposed to.
For sake of clarity I quote my relevant code section:
webServer = [[GCDWebServer alloc] init];
webServer.delegate = self;
__weak AppDelegate *weakSelf = self;
// Add a handler to respond to GET requests
[webServer addDefaultHandlerForMethod:#"GET"
requestClass:[GCDWebServerRequest class]
asyncProcessBlock:^(GCDWebServerRequest* request, GCDWebServerCompletionBlock completionBlock) {
__strong AppDelegate* strongSelf = weakSelf;
[[NSOperationQueue mainQueue] addOperationWithBlock:^ {
//Your code goes in here
NSLog(#"Main Thread Code");
[strongSelf myMethodOnMainThread];
}];
GCDWebServerDataResponse* response = [GCDWebServerDataResponse responseWithJSONObject:packet];
completionBlock(response);
}];
GCWebServer supports fully asynchronous responses as of version 3.0 and later [1].
[webServer addDefaultHandlerForMethod:#"GET"
requestClass:[GCDWebServerRequest class]
asyncProcessBlock:^(GCDWebServerRequest* request, GCDWebServerCompletionBlock completionBlock) {
// 1. Trigger speech synthesizer on main thread (or whatever thread it has to run on) and save "completionBlock"
// 2. Have the delegate from the speech synthesizer call "completionBlock" when done passing an appropriate response
}];
[1] https://github.com/swisspol/GCDWebServer#asynchronous-http-responses
I have a view controller with a UITextView loaded into the frame. I want to update the text of the UITextView every time the function calls itself.
I attempt to update the UITextView on the main thread but it doesn't seem to set the text of the View UNTIL after the recursive function is done running.
'Maze.h' is the object that defines the protocol and 'MainViewController.m' is the delegate.
Heres the code for the controller:
'MainViewController.m'
- (void)viewDidAppear:(BOOL)animated
{
[super viewDidAppear:animated];
Maze *aMaze = [[Maze alloc] initWithMaze:#"Maze.txt" andUpdate:true everyXSeconds:1];
[aMaze setDelegate:self];
if (![aMaze parseFile]) {
exit(2);
}
if ([aMaze solve:-1 y:-1 z:-1]){
NSLog(#"%#", [aMaze printMazeHorizontally]);
NSLog(#"Escapable: %#", [aMaze getMoveSequence]);
} else {
NSLog(#"Unescapable");
exit(1);
}
}
- (void)didMakeMove:(NSString *)maze {
NSLog(#"%#", maze);
dispatch_async(dispatch_get_main_queue(), ^{
[self.maze setText:maze];
});
}
'Maze.m'
- (BOOL)solve:(NSInteger)x y:(NSInteger)y z:(NSInteger)z
{
...
...
[self.delegate didMakeMove:self.printMazeVertically];
...
...
}
The UITextView just doesn't seem to update until -(BOOL)solve::: is done running. Which only updates once instead of multiple times.
Not sure why this is happening.
Any ideas on how to update the UITextView?
I thought that updating the UI should be done on the main thread?
Solution:
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
if ([aMaze solve:-1 y:-1 z:-1]){
NSLog(#"%#", [aMaze printMazeHorizontally]);
NSLog(#"Escapable: %#", [aMaze getMoveSequence]);
} else {
NSLog(#"Unescapable");
exit(1);
}
});
Drawing is performed later in the runloop run, or on the next runloop run. Thus, if you block the main thread while your recursion is running, UI will not update until after you end your recursion.
Consider changing your design. Move the taxing recursion to a background thread, and update the UI using GCD.
I am using the following method that invoked by pressing a button thru sprite builder.
- (void)method {
//static dispatch_once_t pred; //
//dispatch_once(&pred, ^{ // run only once code below
[self performSelector:#selector(aaa) withObject:nil afterDelay:0.f];
[self performSelector:#selector(bbb) withObject:nil afterDelay:1.f];
[self performSelector:#selector(ccc) withObject:nil afterDelay:1.5f];
[self performSelector:#selector(ddd) withObject:nil afterDelay:4.f];
[self performSelector:#selector(eee) withObject:nil afterDelay:4.5f];
CCLOG(#"Received a touch");
//}); //run only once code above
}
as you can see from the comments i tried running it once. that works good, but if a user comes back to this scene, it's disabled until you restart the app.
how can i block this method from being executed a second time until the first time is done.
i know the code is rough, i'm just learning here....
thanks in advance.
Add a BOOL instance variable which serves as a flag as to whether or not this action is taking place. As soon as the method starts, check the flag. If you need to execute, set the flag.
Add another performSelector:withObject:afterDelay: which calls a method to reset the flag back.
#implementation SomeClass {
BOOL _onceAtATime;
}
- (void)method {
#synchronized(self) {
if (!_onceAtATime) {
_onceAtATime = YES;
// do all the stuff you need to do
[self performSelector:#selector(resetOnceAtATime)
withObject:nil
afterDelay:delay];
// where delay is sufficiently long enough for all the code you
// are executing to complete
}
}
}
- (void)resetOnceAtATime {
_onceAtATime = NO;
}
#end
A simpler way would be to use a serial NSOperationQueue as such (in Swift):
class ViewController: UIViewController {
let queue: NSOperationQueue
required init(coder aDecoder: NSCoder) {
queue = NSOperationQueue()
queue.maxConcurrentOperationCount = 1
super.init(coder: aDecoder)
}
#IBAction func go(sender: AnyObject) {
if (queue.operationCount == 0) {
queue.addOperationWithBlock() {
// do the first slow thing here
}
queue.addOperationWithBlock() {
// and the next slow thing here
}
// ..and so on
}
else {
NSLog("busy doing those things")
}
}
}
I'm calling four methods that I want to execute in synchronous order, the first two methods are synchronous, the last two methods are asynchronous (data fetching from URLs).
Pseudo-code:
- (void)syncData {
// Show activity indicator
[object sync]; // Synchronous method
[object2 sync]; // Synchronous method
BOOL object3Synced = [object3 sync]; // Async method
BOOL object4Synced = [object4 sync]; // Async method
// Wait for object3 and object4 has finished and then hide activity indicator
}
How can I achieve this?
Use a barrier:
void dispatch_barrier_async(dispatch_queue_t queue, dispatch_block_t block);
Submits a barrier block for asynchronous execution and returns immediately.
When the barrier block reaches the front of a private concurrent
queue, it is not executed immediately.
Instead, the queue waits until its currently executing blocks finish executing.
At that point, the
queue executes the barrier block by itself. Any blocks submitted after
the barrier block are not executed until the barrier block completes.
This example outputs 1 2 3 4 done although being asynchronous, it could be 1 2 4 3 done. Since I understand you want to handle an activity indicator, this shouldn't matter.
#import <Foundation/Foundation.h>
int main(int argc, char *argv[]) {
#autoreleasepool {
dispatch_queue_t queue = dispatch_queue_create("com.myqueue", 0);
dispatch_sync(queue, ^(){NSLog(#"1");} );
dispatch_sync(queue, ^(){NSLog(#"2");});
dispatch_async(queue, ^(){NSLog(#"3");});
dispatch_async(queue, ^(){NSLog(#"4");});
dispatch_barrier_sync(queue, ^(){NSLog(#"done");});
}
}
For other ways to test asynchronous code, see: https://stackoverflow.com/a/11179523/412916
Assuming you actually have some sort of way of knowing when the asynchronous methods are done, what you probably want is something like:
- (void)syncData {
// Show activity indicator
[object sync]; // Synchronous method
[object2 sync]; // Synchronous method
_object3Synced = _object4Synced = NO;
[object3 syncWithCompletionHandler:
^{
_object3Synced = YES;
[self considerHidingActivityIndicator];
}]; // Async method
[object4 syncWithCompletionHandler:
^{
_object4Synced = YES;
[self considerHidingActivityIndicator];
}]; // Async method
}
- (void)considerHidingActivityIndicator
{
if(_object3Synced && _object4Synced)
{
// hide activity indicator, etc
}
}
You can make a subclass of UIActivityInidicator, add an activityCount property and implement these two additional methods:
- (void)incrementActivityCount
{
if(_activityCount == 0)
{
[self startAnimating];
}
_activityCount++;
}
- (void)decrementActivityCount
{
_activityCount--;
if(_activityCount <= 0)
{
_activityCount = 0;
[self stopAnimating];
}
}
Now whenever you start something that uses the activity counter call incrementActivityCount and in its completion block (or otherwise when it finishes) call decrementActivityCount. You can do other things if you want in these methods, the above is just a simple example which is probably sufficient in most cases (especially if you set hidesWhenStopped = YES).
You would need to launch the first Async method and use a completion block. In the completion block of the first async method, you would launch your second async method. Though this kind of makes using async methods irrelevant.