I using EMMA plugin.
At first I 've run test normally,but there is a problem when I activate coverage collection and run test again it become failed as show in the picture
I 've try to add -XX:-UseSplitVerifier in JVM argument but It's not work.
It's my fault.
I 've try to add -XX:-UseSplitVerifier in the VM options instead of argument and it's work now thank you.
Related
I am trying to run the example "optaplanner-mixedvrp-experiment" developed by Geoffrey De Smet and when I run it it throws me the following error:
Caused by: java.lang.IllegalStateException: The entity (MY) has a
variable (previousStandstill) with value (MUNO) which has a
sourceVariableName variable (nextVisit) with a value (WERBOMONT) which
is not null. Verify the consistency of your input problem for that
sourceVariableName variable.
I have not made any change, I have only cloned and executed it, I import and solve it and it throws me this error.
Do you know what could be happening?
I am applying it in the development of a variant of VRP with multiple deliveries and collections, but it throws me the same error. I have activated the FULL_ASSERT mode and nextVisit, previousStandstill, visitIndex are always null
It's been a long time since I looked at that code, so it's using an old version of optaplanner. Our goal is still to clean it up and offer an out of the box example for VRPPD (and probably remove some boilerplate along the way, using the upcoming #CollectionPlanningVariabe etc). That being said, we have multiple users&customers who used that optaplanner-mixedvrp-experiment to successfully build VRPPD implementations.
Which dataset did you try?
FWIW, that IllegalStateException says that when A.previous = B, the B.next is not A. So either the dataset importer didn't import it correctly - before calling solve() - especially if it fails before the first CH step in FULL_ASSERT. Or one of the custom moves corrupted the model.
I'm trying to get a BG95 to activate on hologram.
Here are my commands:
AT+QCFG="band",F,180A,180A OK
AT+QCFG="iotopmode",2 OK
AT+QCFG="nwscanseq",020301 OK
AT+QCFG="nwscanmode",0 OK
AT+QCFG="snrscan",0 OK
AT+QICSGP=1,1,"hologram","","",1 OK
AT+QIACT=1 ERROR
At first I thought it was antenna/signal related so I ran AT+CSQ and got this:
+csq: 11,99
This tells me I have a good signal I believe.
Next I tried AT+QNWINFO and get this:
+QNWINFO: "eMTC","311480","LTE BAND 13",5230
In my mind this is saying it's connected to a network.
After trying that I tried to activate again and got this:
AT+QIACT=1
ERROR
The weird thing is it activated just fine about a week ago with pure AT commands. I did try and use an Arduino library with it (WisLTEBG96TCPIP) which may have changed a setting in it. I've done a factory reset but the it still woln't activate.
Another strange thing is the hologram dashboard. Every once and a while it will show the SIM as connected, even though I can't activate.
I have tried with 2 different SIM cards any get the same activation error.
Any help would be greatly appreciated!
Verizon has cut off all non ODI products. If your hardware has not been Verizon ODI 'certified' it will no longer be allow to be connected to their network, I have 5 new pet rocks thanks to them. The solution is to purchase new modems from vendors that have been through the Verizon ODI program or switch carriers.
I had the same problem before, after a lot of maling with network operator I find out that there isn't a LTE-CAT-M1 (eMTC) network in my area, I tested in another area successfully
Also before setting AT+QCFG commands try AT+CFUN = 0
and after setting AT+QCFG commands try AT+CFUN = 1 .
before sending AT+QIACT, try 'AT+CEREG?' command several times and tell me what is the return of it
One question as just starting to use karate-gatling: is it possible to aggregate the reports generated? So after multiple runs to get one single report? It would be nice to be able to compare somehow the performance - to get automatically the information if there is a performance degradation or not. What I did try but did not work, was to copy the simulation logs and afterwards only generate the reports ("gatling.bat -ro simulations") but this did not work. The error that I got was:
gatling.bat -ro simulations/catskaratesimulation-1544015145031
GATLING_HOME is set to "D:\AutomationTeam\gatling-charts-highcharts-bundle-3.0.1.1"
JAVA = ""C:\Program Files\Java\jdk1.8.0_131\bin\java.exe""
Parsing log file(s)...
Exception in thread "main" java.lang.NumberFormatException: For input string: "catskaratesimulation"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:65)
at java.lang.Long.parseLong(Long.java:589)
at java.lang.Long.parseLong(Long.java:631)
at scala.collection.immutable.StringLike.toLong(StringLike.scala:305)
at scala.collection.immutable.StringLike.toLong$(StringLike.scala:305)
at scala.collection.immutable.StringOps.toLong(StringOps.scala:29)
at io.gatling.charts.stats.LogFileReader.$anonfun$firstPass$1(LogFileReader.scala:102)
at scala.collection.Iterator.foreach(Iterator.scala:937)
at scala.collection.Iterator.foreach$(Iterator.scala:937)
at scala.collection.AbstractIterator.foreach(Iterator.scala:1425)
at io.gatling.charts.stats.LogFileReader.firstPass(LogFileReader.scala:86)
at io.gatling.charts.stats.LogFileReader.$anonfun$x$4$1(LogFileReader.scala:125)
at io.gatling.charts.stats.LogFileReader.parseInputFiles(LogFileReader.scala:63)
at io.gatling.charts.stats.LogFileReader.(LogFileReader.scala:125)
at io.gatling.app.RunResultProcessor.initLogFileReader(RunResultProcessor.scala:67)
at io.gatling.app.RunResultProcessor.processRunResult(RunResultProcessor.scala:49)
at io.gatling.app.Gatling$.start(Gatling.scala:81)
at io.gatling.app.Gatling$.fromArgs(Gatling.scala:46)
at io.gatling.app.Gatling$.main(Gatling.scala:38)
at io.gatling.app.Gatling.main(Gatling.scala)
Is there another way to do it? Should I somehow reconfigure gatling? Thanks!
It worked when using the same version (2.2.4) via gatling.bat -ro folder_with_simulations.
I'm Kind new in Cloudsim and CloudReports Extension so i don't know why
when running the CloudReports simulator it gives this Error:
nullpointerexception at org.cloudbus.cloudsim.power.powerdatacenter.processcloudletsubmit(powerdatacenter.java:269)
I was adding a cloudlet scheduling Algorithm to the Extension
All I can see that the error happens with cloudlets Migration.
I tried searching alot about how to Fix it but didn't find something that will help me.
the Error is like this:
java.lang.NullPointerException
at org.cloudbus.cloudsim.Datacenter.processCloudletSubmit(Datacenter.java:761)
at org.cloudbus.cloudsim.power.PowerDatacenter.processCloudletSubmit(PowerDatacenter.java:269)
at org.cloudbus.cloudsim.Datacenter.processEvent(Datacenter.java:159)
at org.cloudbus.cloudsim.core.SimEntity.run(SimEntity.java:406)
at org.cloudbus.cloudsim.core.CloudSim.runClockTick(CloudSim.java:471)
at org.cloudbus.cloudsim.core.CloudSim.run(CloudSim.java:835)
at org.cloudbus.cloudsim.core.CloudSim.startSimulation(CloudSim.java:151)
at cloudreports.simulation.Simulation.runSimulation(Simulation.java:157)
at cloudreports.simulation.Simulation.runAllSimulations(Simulation.java:129)
at cloudreports.simulation.Simulation.run(Simulation.java:98)
at java.lang.Thread.run(Thread.java:748)
plz Advise;
Regards.
I ran into the same problem while I was following the simulation examples provided in the CloudSim project. After debugging figured out that the problem was with setting the UserID of the created cloudlet. I was setting a random value as the userId while the simulation retrieves the cloudlet using the brokerId. So setting the userId with the brokerId that was created did the trick for me.
// dataCenterBroker is the instance of the broker which you created
int brokerId = dataCenterBroker.getId();
//setting the userId after creating the cloudlet
cloudLet.setUserId(brokerId)
My fix engine keeps rejecting messages and I was hoping someone could help me figure out why... I'm receiving the following sample message:
8=FIXT.1.1 9=518 35=AE 34=4 1128=8 49=XXXXXXX 56=YYYYYYY 52=20130322-17:58:37 552=1 54=1 37=Z00097H4ON 11=NOREF 826=0 78=1 79=NOT SPECIFIED 80=100000.000000 5967=129776.520000 453=5 448=BCART6 452=3 447=D 448=BARX 452=1 447=D 448=BARX 452=16 447=D 448=bcart6 452=11 447=D 448=ABCDEFGHI 452=12 447=D 571=6611540 150=F 17=Z00097H4ON 32=100000.000000 38=100000.000000 15=EUR 1056=129776.520000 31=1.2977652 194=1.298120 195=-3.5480 64=20130409 63=W2 60=20130322-17:26:50 75=20130322 1057=Y 460=4 167=FOR 65=OR 55=EUR/USD 10=121
8=FIXT.1.1 9=124 35=3 34=4 49=XXXXXXX 52=20130322-17:58:37.917 56=YYYYYYY 45=4 58=Tag appears more than once 371=448 372=AE 373=13 10=216
But as you can see it's being rejected by the quickfix engine. I am using the 5.0sp1 data dictionary and have configured it in my config file:
[DEFAULT]
ConnectionType=initiator
HeartBtInt=30
ReconnectInterval=10
SocketReuseAddress=Y
FileStorePath=D:\XXX\Interface\ReutersStore
FileLogPath=D:\XXX\Interface\ReutersLog
[SESSION]
BeginString = FIXT.1.1
SenderCompID = XXXXX
TargetCompID= YYYYY
DefaultApplVerId = FIX.5.0
UseDataDictionary=Y
AppDataDictionary=FIX50SP1.xml
StartDay=sunday
StartTime=20:55:00
EndTime=06:05:00
EndDay=saturday
SocketConnectHost= A.B.C.D
SocketConnectPort= 123
Does anyone have any idea why the Engine would be rejecting this message? I know that quickfix is normally able to handle messages with repeating groups, is it a config thing? Any help would be greatly appreciated!
Your message seems to be in order. Try putting this in your config file.
ValidateFieldsOutOfOrder=N
Quickfix by default puts that as Y and the underlying structure storing the tab and field values is unable to see the count before. 453 > 448.
As a sidenote always check these fields. They should point you to the source of the problem.
58=Tag appears more than once
371=448
Maybe it's a shot in the dark, but I had a similar a problem when using a 5.0sp2 dictionary.
I resolved using an updated version of the quickfix library compiled from the library SVN repository. If I remember correctly this was the bug.
It seems that the quickfix library has not been updated since a long time, and for newer version of fix I suggest you to use the "trunk" of the repo.
I had the same problem and i resolved it by tweaking my DataDictionary like the following in message AE TradeCaptureReport