i have a 32 bit Fedora 14 machine and I am trying to install IntellIJ IDEA on it, I used the package manager to install it. Along with that installation, also Eclipse and Groovy got installed.
Then I tried to install a new version of JDK but it didnt allow me to do so because of conflict with an older version of JRE, So I removed the JRE older version and installed JDK.
Then I have been noticing that IntelliJ refuses to run, I uninstalled and reinstalled and checked several times, but it just refuses to start, Then I opened a terminal and typed intell, hoping that the terminal would complete it for me, and I could launch the program from the command line, but no it said "intellIj:Command not found", whereas the same thing does not happen with Eclipse or Groovy.
I have tried restarting the machine several times, uninstalled and then reinstalled the packages several times, but nothing seems to work. I am not sure whether Intellij is getting installed or not, but the Package Manager does not show any error while the software is being installed. Any ideas as to why this is happening, and how to get around this problem?
You should try to install it manually by just extracting tgz file downloaded from producer website. Then you start IDE by launching IDEA_DIRECTORY/bin/idea.sh
Related
I had Erlang 21.2 installed as I am using RabbitMQ (3.7.10), this is on Windows 10. I wanted to upgrade to a later version RabbitMQ (3.9.15), so I uninstalled 21.2 and installed 24.3.3. But after upgrading RabbitMQ I cant run RabbitMQ.
When trying to start I get the following error:
Unable to load emulator DLL
(C:\Program Files\erl-24.3.3\erts-12.3.1\bin\beam.smp.dll)
I thought this might be an issue with RabbitMQ and have uninstalled and reinstalled both Erlang and RabbitMQ multiple times now with no change.
I decided to try run Erlang manually from C:\Program Files\erl-24.3.3\erts-12.3.1\bin\ but when I run '.\erl.exe' I get the same error.
Taking Luke's advice we downloaded 24.3.4 and ran the installer. We also re-ticked the box to install windows binaries even though it said they were already present.
Not sure which of those two things actually fixed the issue but after that Erlang started successfully.
On my computer (64 bit operating system, x64 based processor) I installed Amazon Correto JDK 11 (for 64 bit) and IntelliJ IDEA. it was working till today without any issues. But now I can not open my Intellij IDEA. In fact it is not even launching.
I checked the environment variables and path reference of Java. It is all set. But when I double click on Intellij IDEA it is showing loading sign for a moment but it is not launching. I tried to run the same by going to it's directory and by using cmd. But still it is not launching. When I try to open the 32-bit version I get an error, but I know it is obvious, because I am using a JDK version for 64 bit. I want to know why my Intellij IDEA is not launching. Even after downloading the appropriate Java version and setting up the path correctly. There were no issues till today. I tried reinstalling my Java and Intellij. Still the issue is there. If anyone can help, please let me know the reason.
You are trying to run 32-bit idea.exe while your default JDK points to 64-bit JDK, hence the problem. Please use idea64.exe instead that will run on the bundled JetBrains Runtime.
In case idea64.exe also fails, please run using idea.bat inside cmd.exe to see if there any errors logged in the console.
Perform the steps from this document if the issue is caused by some plug-in or corrupted options.
When I launch the REDHAWK IDE via Eclipse, I cannot see the installed components (SigGen, fastFilter, etc). I can see the components just fine if I use the command line to create a project. I'm convinced it has to be a path or variable issues, but I just don't know what to reconfigure.
I'm using REDHAWK Version 2.1.0 and on CentOS7
OSSIEHOME is set to the /usr/local/redhawk/core
SDRROOT is set to /var/redhawk/sdr
Any suggestions?
I found a solution by reinstalling and including every Redhawk package that I could find using "yum list redhawk*"
I have the same problem and it turns out I was using a Java version higher than 8 which is not supported by RedHawk. Make sure you use Java 8 to launch the IDE otherwise it does not work. Submitted a DR but because JDK8 still supported they do not feel the need to fix it.
I followed the official installation instructions for RedHawk 2.3.0 on Centos 7.9 and had this same issue, I fixed it by opening a terminal in the Redhawk installation directory and running
sudo yum install redhawk-basic-components-2.3.0-5.el7.x86_64.rpm
After which the components appeared in the IDE without a restart
After installation, Netbeans open fine, Open Exiting Project, Or Existing File works. However Netbeans doesn't show New Project or New File Dialog, whether selecting it from menu or from the toolbar. Netbeans version is 8.2, Ubuntu version is 16.04. It is a fresh install, and Oracle jdk-9 installed.
update-alternatives point to oracle-java.
Uninstalled and Reinstalled Netbeans, without any success.
Any suggestions.
Had the same problem with JDK 9, switched back to JDK 8
Change netbeans.conf file and adjust JDK.
Netbeans 8.2 seems to have some problem with JDK11 as well. Do not know whether it has been fixed, since even after dowloading JDK11 the problem persists.
Without deleting the newer ones you can set the path to the previous versions i.e. JDK8 and it works.
Open the following file
/Applications/NetBeans/NetBeans 8.2.app/Contents/Resources/NetBeans/etc/netbeans.conf
Look for #netbeans_jdkhome=
set the path to the older version of java:
netbeans_jdkhome="/Library/Java/JavaVirtualMachines/jdk1.8.0_92.jdk/Contents/Home"
and restart the netbeans.
Funny thing but i changed the jvm in update-alternative to open-jdk jvm and it starts working.
I closed netbeans 8.2, commented out the reference to the JDK home in the netbeans.conf file, in the root of the netbeans 8.2 folder
# netbeans_jdkhome="C:\Program Files\Java\jdk-9.0.4"
When I restarted the navigation pane that were previously missing appeared as they should.
What worked for me was:
In Program Files, go to Java
For me, my computer has already downloaded the latest JDK. Check to see if there are JDKs in your folder
Delete the duplicate/latest JDK's
For me, this problem started after a Mac OS upgrade to 10.15.4.
None of the solutions worked.
I uninstalled NetBeans and reinstalled it, and it worked.
I just started to develop website with mono+asp.net mvc2 on mac osx but I am quite new to mono and mac.
I have got things working from MonoDevelop. My website is running ok with XSP when I run it from MonoDevelop.
Now, I am trying to test it from Apache server, but I don’t know how to set things up. Some instruction I can found are all very old or incomplete. I tried a few of them, but none worked.
Could anyone please help me out?
The best way to install mod_mono on OS X is from source. To do this there are a couple steps.
First, make sure you've installed XCode (which can be found on the DVD or the 2nd CD that came with the machine or the App Store) which will provide you with gcc and the rest of the standard toolchain.
Most of the normal in-between steps can be skipped, assuming you've already installed Mono and MonoDevelop from their stable release packages. If you encounter an error later on, you'll want to install updated versions of XSP and Mono and try again.
Next, download the latest stable release of mod_mono, extract the contents of the archive (by double clicking on the icon) and follow steps 1, 2 & 3 in the INSTALL file, and you should be good to go. This entire process took about ~5 minutes to get up and running :)
I am a novice with mono but followed some instructions. I downloaded and installed everything from here:
http://www.go-mono.com/mono-downloads/download.html
To get Apache to work with mod_mono.so I downloaded source from this page:
http://download.mono-project.com/sources/mod_mono/
You have to compile it. I went into the unpacked directory and wrote this in termminal:
./configure --prefix=/usr
make
sudo make install
This puts the mod_mono.so in correct Apache dir and the mod_mono.conf file. To include it you must add this to your httpd.conf (I put it at the end of the file):
# mod_mono_configuration
Include /etc/apache2/mod_mono.conf
MonoServerPath /Library/Frameworks/Mono.framework/Versions/Current/bin/mod-mono-server2