So my understanding is that after command can be used to delay the execution of a script or a command for certain ms but when i execute the below command, the output is printed immediately
Command:
after 4000 [list puts "hello"]
Output:
hello
after#0
Question: Why was the output not delayed for 4s here?
That what you wrote works; I just tried it at a tclsh prompt like this:
% after 4000 [list puts "hello"]; after 5000 set x 1; vwait x
Did you write something else instead, such as this:
after 4000 [puts "hello"]
In this case, instead of delaying the execution of puts, you'd be calling it immediately and using its result (the empty string) as the argument to after (which is valid, but useless).
Think of [list …] as a special kind of quoting.
The other possibility when running interactively is that you take several seconds between running the after and starting the event loop (since the callbacks are only ever run by the event loop). You won't see that in wish of course — that's always running an event loop — but it's possible in tclsh as that doesn't start an event loop by default. But I'd put that as a far distant second in terms of probability to omitting the list word…
Is there a way to allow failures to increment the fail count when using ignore_errors?
Edit: since it may be unclear for some, will someone let me know how to do this?
It looks like it is impossible without modifying Ansible code.
Failure count is increased by stats.increment('failures', ... method which is executed inside the if not ignore_errors: condition.
Otherwise (i.e., when ingore_errors: true) an OK-counter is increased:
stats.increment('ok', ....
If you are using some unix flavor
ansible-playbook pb.yml | tee >(grep -c FAILED)
this should print the number of failures
I have a problem with ksh in that a while loop is failing to obey the "while" condition. I should add now that this is ksh88 on my client's Solaris box. (That's a separate problem that can't be addressed in this forum. ;) I have seen Lance's question and some similar but none that I have found seem to address this. (Disclaimer: NO I haven't looked at every ksh question in this forum)
Here's a very cut down piece of code that replicates the problem:
1 #!/usr/bin/ksh
2 #
3 go=1
4 set -x
5 tail -0f loop-test.txt | while [[ $go -eq 1 ]]
6 do
7 read lbuff
8 set $lbuff
9 nwords=$#
10 printf "Line has %d words <%s>\n" $nwords "${lbuff}"
11 if [[ "${lbuff}" = "0" ]]
12 then
13 printf "Line consists of %s; time to absquatulate\n" $lbuff
14 go=0 # Violate the WHILE condition to get out of loop
15 fi
16 done
17 printf "\nLooks like I've fallen out of the loop\n"
18 exit 0
The way I test this is:
Run loop-test.sh in background mode
In a different window I run commands like "echo some nonsense >>loop_test.txt" (w/o the quotes, of course)
When I wish to exit, I type "echo 0 >>loop-test.txt"
What happens? It indeed sets go=0 and displays the line:
Line consists of 0; time to absquatulate
but does not exit the loop. To break out I append one more line to the txt file. The loop does NOT process that line and just falls out of the loop, issuing that "fallen out" message before exiting.
What's going on with this? I don't want to use "break" because in the actual script, the loop is monitoring the log of a database engine and the flag is set when it sees messages that the engine is shutting down. The actual script must still process those final lines before exiting.
Open to ideas, anyone?
Thanks much!
-- J.
OK, that flopped pretty quick. After reading a few other posts, I found an answer given by dogbane that sidesteps my entire pipe-to-while scheme. His is the second answer to a question (from 2013) where I see neeraj is using the same scheme I'm using.
What was wrong? The pipe-to-while has always worked for input that will end, like a file or a command with a distinct end to its output. However, from a tail command, there is no distinct EOF. Hence, the while-in-a-subshell doesn't know when to terminate.
Dogbane's solution: Don't use a pipe. Applying his logic to my situation, the basic loop is:
while read line
do
# put loop body here
done < <(tail -0f ${logfile})
No subshell, no problem.
Caveat about that syntax: There must be a space between the two < operators; otherwise it looks like a HEREIS document with bad syntax.
Er, one more catch: The syntax did not work in ksh, not even in the mksh (under cygwin) which emulates ksh93. But it did work in bash. So my boss is gonna have a good laugh at me, 'cause he knows I dislike bash.
So thanks MUCH, dogbane.
-- J
After articulating the problem and sleeping on it, the reason for the described behavior came to me: After setting go=0, the control flow of the loop still depends on another line of data coming in from STDIN via that pipe.
And now that I have realized the cause of the weirdness, I can speculate on an alternative way of reading from the stream. For the moment I am thinking of the following solution:
Open the input file as STDIN (Need to research the exec syntax for that)
When the condition occurs, close STDIN (Again, need to research the syntax for that)
It should then be safe to use the more intuitive:while read lbuffat the top of the loop.
I'll test this out today and post the result. I'd hope someone else benefit from the method (if it works).
Does anyone know of a way to query OS X in order to find out how much time is actually left before it enters either system sleep or activates the display sleep (or even disk sleep), either via the command line, or any other method (Ruby or Objective-C for instance)?
I thought something like pmset via the command line might have offered this information, but it appears to only show and update what the current settings are, rather than allow feedback of where in the cycle the OS currently is.
My requirement is that I currently have a Ruby script that I'd like to run only when I'm not using the machine and a simple 'whatcher script' would allow this, but what to 'watch' is the thing I need a little help with.
It seems like there should be a simple answer, but so far I've not found anything obvious. Any ideas?
Heres a bash script to show the commands, which are a little complicated. The idea is that the user sets the system sleep time in the energy saver preference pane. The system will actually go to sleep when no device attached to the computer has moved for that time. So to get the time until the system goes to sleep we need the difference between those 2 results.
#!/bin/bash
# this will check how long before the system sleeps
# it gets the system sleep setting
# it gets the devices idle time
# it returns the difference between the two
#
# Note: if systemSleepTimeMinutes is 0 then the system is set to not go to sleep at all
#
systemSleepTimeMinutes=`pmset -g | grep "^[ ]*sleep" | awk '{ print $2 }'`
if [ $systemSleepTimeMinutes -gt "0" ]; then
systemSleepTime=`echo "$systemSleepTimeMinutes * 60" | bc`
devicesIdleTime=`ioreg -c IOHIDSystem | awk '/HIDIdleTime/ {print $NF/1000000000; exit}'`
secondsBeforeSleep=`echo "$systemSleepTime - $devicesIdleTime" | bc`
echo "Time before sleep (sec): $secondsBeforeSleep"
exit 0
else
echo "The system is set to not sleep."
exit 0
fi
It's the first great virtue of programmers. All of us have, at one time or another automated a task with a bit of throw-away code. Sometimes it takes a couple seconds tapping out a one-liner, sometimes we spend an exorbitant amount of time automating away a two-second task and then never use it again.
What tiny hack have you found useful enough to reuse? To make go so far as to make an alias for?
Note: before answering, please check to make sure it's not already on favourite command-line tricks using BASH or perl/ruby one-liner questions.
i found this on dotfiles.org just today. it's very simple, but clever. i felt stupid for not having thought of it myself.
###
### Handy Extract Program
###
extract () {
if [ -f $1 ] ; then
case $1 in
*.tar.bz2) tar xvjf $1 ;;
*.tar.gz) tar xvzf $1 ;;
*.bz2) bunzip2 $1 ;;
*.rar) unrar x $1 ;;
*.gz) gunzip $1 ;;
*.tar) tar xvf $1 ;;
*.tbz2) tar xvjf $1 ;;
*.tgz) tar xvzf $1 ;;
*.zip) unzip $1 ;;
*.Z) uncompress $1 ;;
*.7z) 7z x $1 ;;
*) echo "'$1' cannot be extracted via >extract<" ;;
esac
else
echo "'$1' is not a valid file"
fi
}
Here's a filter that puts commas in the middle of any large numbers in standard input.
$ cat ~/bin/comma
#!/usr/bin/perl -p
s/(\d{4,})/commify($1)/ge;
sub commify {
local $_ = shift;
1 while s/^([ -+]?\d+)(\d{3})/$1,$2/;
return $_;
}
I usually wind up using it for long output lists of big numbers, and I tire of counting decimal places. Now instead of seeing
-rw-r--r-- 1 alester alester 2244487404 Oct 6 15:38 listdetail.sql
I can run that as ls -l | comma and see
-rw-r--r-- 1 alester alester 2,244,487,404 Oct 6 15:38 listdetail.sql
This script saved my career!
Quite a few years ago, i was working remotely on a client database. I updated a shipment to change its status. But I forgot the where clause.
I'll never forget the feeling in the pit of my stomach when I saw (6834 rows affected). I basically spent the entire night going through event logs and figuring out the proper status on all those shipments. Crap!
So I wrote a script (originally in awk) that would start a transaction for any updates, and check the rows affected before committing. This prevented any surprises.
So now I never do updates from command line without going through a script like this. Here it is (now in Python):
import sys
import subprocess as sp
pgm = "isql"
if len(sys.argv) == 1:
print "Usage: \nsql sql-string [rows-affected]"
sys.exit()
sql_str = sys.argv[1].upper()
max_rows_affected = 3
if len(sys.argv) > 2:
max_rows_affected = int(sys.argv[2])
if sql_str.startswith("UPDATE"):
sql_str = "BEGIN TRANSACTION\\n" + sql_str
p1 = sp.Popen([pgm, sql_str],stdout=sp.PIPE,
shell=True)
(stdout, stderr) = p1.communicate()
print stdout
# example -> (33 rows affected)
affected = stdout.splitlines()[-1]
affected = affected.split()[0].lstrip('(')
num_affected = int(affected)
if num_affected > max_rows_affected:
print "WARNING! ", num_affected,"rows were affected, rolling back..."
sql_str = "ROLLBACK TRANSACTION"
ret_code = sp.call([pgm, sql_str], shell=True)
else:
sql_str = "COMMIT TRANSACTION"
ret_code = sp.call([pgm, sql_str], shell=True)
else:
ret_code = sp.call([pgm, sql_str], shell=True)
I use this script under assorted linuxes to check whether a directory copy between machines (or to CD/DVD) worked or whether copying (e.g. ext3 utf8 filenames -> fusebl
k) has mangled special characters in the filenames.
#!/bin/bash
## dsum Do checksums recursively over a directory.
## Typical usage: dsum <directory> > outfile
export LC_ALL=C # Optional - use sort order across different locales
if [ $# != 1 ]; then echo "Usage: ${0/*\//} <directory>" 1>&2; exit; fi
cd $1 1>&2 || exit
#findargs=-follow # Uncomment to follow symbolic links
find . $findargs -type f | sort | xargs -d'\n' cksum
Sorry, don't have the exact code handy, but I coded a regular expression for searching source code in VS.Net that allowed me to search anything not in comments. It came in very useful in a particular project I was working on, where people insisted that commenting out code was good practice, in case you wanted to go back and see what the code used to do.
I have two ruby scripts that I modify regularly to download all of various webcomics. Extremely handy! Note: They require wget, so probably linux. Note2: read these before you try them, they need a little bit of modification for each site.
Date based downloader:
#!/usr/bin/ruby -w
Day = 60 * 60 * 24
Fromat = "hjlsdahjsd/comics/st%Y%m%d.gif"
t = Time.local(2005, 2, 5)
MWF = [1,3,5]
until t == Time.local(2007, 7, 9)
if MWF.include? t.wday
`wget #{t.strftime(Fromat)}`
sleep 3
end
t += Day
end
Or you can use the number based one:
#!/usr/bin/ruby -w
Fromat = "http://fdsafdsa/comics/%08d.gif"
1.upto(986) do |i|
`wget #{sprintf(Fromat, i)}`
sleep 1
end
Instead of having to repeatedly open files in SQL Query Analyser and run them, I found the syntax needed to make a batch file, and could then run 100 at once. Oh the sweet sweet joy! I've used this ever since.
isqlw -S servername -d dbname -E -i F:\blah\whatever.sql -o F:\results.txt
This goes back to my COBOL days but I had two generic COBOL programs, one batch and one online (mainframe folks will know what these are). They were shells of a program that could take any set of parameters and/or files and be run, batch or executed in an IMS test region. I had them set up so that depending on the parameters I could access files, databases(DB2 or IMS DB) and or just manipulate working storage or whatever.
It was great because I could test that date function without guessing or test why there was truncation or why there was a database ABEND. The programs grew in size as time went on to include all sorts of tests and become a staple of the development group. Everyone knew where the code resided and included them in their unit testing as well. Those programs got so large (most of the code were commented out tests) and it was all contributed by people through the years. They saved so much time and settled so many disagreements!
I coded a Perl script to map dependencies, without going into an endless loop, For a legacy C program I inherited .... that also had a diamond dependency problem.
I wrote small program that e-mailed me when I received e-mails from friends, on an rarely used e-mail account.
I wrote another small program that sent me text messages if my home IP changes.
To name a few.
Years ago I built a suite of applications on a custom web application platform in PERL.
One cool feature was to convert SQL query strings into human readable sentences that described what the results were.
The code was relatively short but the end effect was nice.
I've got a little app that you run and it dumps a GUID into the clipboard. You can run it /noui or not. With UI, its a single button that drops a new GUID every time you click it. Without it drops a new one and then exits.
I mostly use it from within VS. I have it as an external app and mapped to a shortcut. I'm writing an app that relies heavily on xaml and guids, so I always find I need to paste a new guid into xaml...
Any time I write a clever list comprehension or use of map/reduce in python. There was one like this:
if reduce(lambda x, c: locks[x] and c, locknames, True):
print "Sub-threads terminated!"
The reason I remember that is that I came up with it myself, then saw the exact same code on somebody else's website. Now-adays it'd probably be done like:
if all(map(lambda z: locks[z], locknames)):
print "ya trik"
I've got 20 or 30 of these things lying around because once I coded up the framework for my standard console app in windows I can pretty much drop in any logic I want, so I got a lot of these little things that solve specific problems.
I guess the ones I'm using a lot right now is a console app that takes stdin and colorizes the output based on xml profiles that match regular expressions to colors. I use it for watching my log files from builds. The other one is a command line launcher so I don't pollute my PATH env var and it would exceed the limit on some systems anyway, namely win2k.
I'm constantly connecting to various linux servers from my own desktop throughout my workday, so I created a few aliases that will launch an xterm on those machines and set the title, background color, and other tweaks:
alias x="xterm" # local
alias xd="ssh -Xf me#development_host xterm -bg aliceblue -ls -sb -bc -geometry 100x30 -title Development"
alias xp="ssh -Xf me#production_host xterm -bg thistle1 ..."
I have a bunch of servers I frequently connect to, as well, but they're all on my local network. This Ruby script prints out the command to create aliases for any machine with ssh open:
#!/usr/bin/env ruby
require 'rubygems'
require 'dnssd'
handle = DNSSD.browse('_ssh._tcp') do |reply|
print "alias #{reply.name}='ssh #{reply.name}.#{reply.domain}';"
end
sleep 1
handle.stop
Use it like this in your .bash_profile:
eval `ruby ~/.alias_shares`