Is there a way to allow failures to increment the fail count when using ignore_errors?
Edit: since it may be unclear for some, will someone let me know how to do this?
It looks like it is impossible without modifying Ansible code.
Failure count is increased by stats.increment('failures', ... method which is executed inside the if not ignore_errors: condition.
Otherwise (i.e., when ingore_errors: true) an OK-counter is increased:
stats.increment('ok', ....
If you are using some unix flavor
ansible-playbook pb.yml | tee >(grep -c FAILED)
this should print the number of failures
Related
I need some help with a script. Solaris 10 and ksh.
I Have a file called /temp.list with this content:
192.168.0.1
192.168.0.2
192.168.0.3
So, I have a script which reads this list and executes some commands using the lines values:
FILE_TMP="/temp.list"
while IFS= read line
do
ping $line
done < "$FILE_TMP"
It works, but it executes the command on line 1. When it's over, it goes to the line 2, and it goes successively until the end. I would like to find a way to execute the command ping at the same time in each line of the list. Is there a way to do it?
Thank you in advance!
Marcus Quintella
As Ari's suggested, googling ksh multithreading will produce a lot of ideas/solutions.
A simple example:
FILE_TMP="/temp.list"
while IFS= read line
do
ping $line &
done < "$FILE_TMP"
The trailing '&' says to kick the ping command off in the background, allowing loop processing to continue while the ping command is running in the background.
'course, this is just the tip of the proverbial iceberg as you now need to consider:
multiple ping commands are going to be dumping output to stdout (ie, you're going to get a mish-mash of ping output in your console), so you'll need to give some thought as to what to do with multiple streams of output (eg, redirect to a common file? redirect to separate files?)
you need to have some idea as to how you want to go about managing and (possibly) terminating commands running in the background [ see jobs, ps, fg, bg, kill ]
if running in a shell script you'll likely find yourself wanting to suspend the main shell script processing until all background jobs have completed [ see wait ]
Without getting too much into the weeds, I have a Pentaho PDI job with multiple sub-transformations and sub-jobs (ETL from MySQL to Postgres). This job runs exactly as expected from Spoon, no errors, but when I run the job--with the following command--I am met with an endless loop error at the first step where a parameter would need to be defined and passed from within the job (the named params from the command seem to integrate fine). The command I am using is as follows:
sudo /bin/sh kitchen.sh \
-rep=KettleFileRepo \
-dir=M2P \
-job=ETL-M2P \
-level=Rowlevel \
-param:MY.PAR.LOADTYPE=full \
-param:MY.PAR.TABLELIST=table1 \
-param:MY.PAR.TENANTS=tenant1 \
/
Has anyone run into this type of issue with a discrepancy between Spoon and Kitchen? Is there some sort of config or command line option that I am missing? I am running version 6.0.1.0-386 on OS X 10.11.4.
If you think more details would be beneficial please let me know and I can provide whatever is necessary.
I am not aware of any discrepancy between Spoon and Kitchen. Are you sure, its not something in the ETL that causing the loop. I would suggest to go through your ETL in detail.
Another thing you can try to debug is run only part of the job in kitchen and keep adding more as you see success.
I have seen this pass results to another command in redis
and using via command line this command works well :
src/redis-cli keys '*' | xargs src/redis-cli mget
However how can we achieve the same effect via Lettuce (i started trying out 4.0.2.Final)
Also a solution to this is particularly important in the following scenario :
Say we are using geolocation capabilities, and we add a set of locations of "my-location-category"
using GEOADD
GEOADD "category-1" 8.6638775 49.5282537 "location-id:1" 8.3796281 48.9978127 "location-id:2" 8.665351 49.553302 "location-id:3"
Next, say we do a GeoRadius to get locations within 10 km radius of 8.6582361 49.5285495 for "category-1"
Now when we get "location-id:1" & "location-id:3"
Given that I already set values for above keys "location-id:1" & "location-id:3"
I want to pipe commands to do the GEORADIUS as well as do mget on all the matching results.
Does Redis provide feature to do that?
and / or how can we achieve this via the Lettuce client library without first manually iterating through results of GEORADIUS and then do manual mget.
That would be more efficient performance for the program that uses it.
Does anyone know how we can do this ?
Update
This is the piped command for the scenario I discussed above :
src/redis-cli GEORADIUS "category-1" 8.6582361 49.5285495 10 km | xargs src/redis-cli mget
Now we need to know how to do this via Lettuce
IMPORTANT: never use KEYS, always use SCAN instead if you must.
This isn't really a question about Lettuce nor Java so I can actually answer it :)
What you're trying to do is use the results from a read operation (GEORADIUS) as input (key names) for another read operation (MGET). This type of flow can't be pipelined, well, just because of that - pipelining means that you don't need the answers for operations right away but in you case you do.
However.
Since you're reading String keys with MGET, you might as well just denormalize everything (remember, we're NoSQL) and store the contents of these keys in the Sorted Set's members, e.g.:
GEOADD "category-1" 8.6638775 49.5282537 "location-id:1:moredata:evenmoredata:{maybe a JSON document here}:orperhapsmsgpack"
This will allow you to get the locations and their "data" with one GEORADIUS call. Of course, any updates to location:1's data will need to be done across all categories.
A note about Lua scripts: while a Lua script could definitely save on the back and forth in this case, any such script will be against best practices/not cluster safe.
After digging around and studying Lua script, my conclusion is that removing round-trips in such a way can only be done via Lua scripts as suggested by Itamar Haber.
I ended up creating a lua script file (myscript.lua) as below
local locationKeys = redis.call('GEORADIUS', 'category-1', '8.6582361', '49.5285495', '10', 'km' )
if unpack(locationKeys) == nil then
return nil
else
return redis.call('MGET', unpack(locationKeys))
end
** of course we should be sending in parameters to this... this is just a poc :)
now you can execute it via command
src/redis-cli EVAL "$(cat myscript.lua)" 0
Then to reduce the network-overhead of sending across the entire script to Redis for execution, we have the option of registering the script with Redis.
Redis will give us a sha1 digested code for future references for that script, which can be used for next calls to that script.
This can be done as below :
src/redis-cli SCRIPT LOAD "$(cat myscript.lua)"
this should give back a sha1 code something like this : 49730aa2ed3034ee48f818e486tpbdf1b500b19e
next calls can be done using this code
eg
src/redis-cli evalsha 49730aa2ed3034ee48f818e486b2bdf1b500b19e 0
The sad part however here is that the sha1 digest is remembered only so long as the instance of redis is running. If it is restarted, that the sha1 digest is lost. Then you do the SCRIPT LOAD once again. And if nothing changes in the script, then the sha1-digest code will be the same.
Ideally while using through client api, we should first attempt evalsha, if that returns a "No matching script" error, then as a fallback do script load, and procure the sha1 code once again, and create an internal map of that and use that sha1 code for further calls.
This can well be done via Lettuce. I could find the methods for those. Hope this gives a good insight into solution for the problem.
I have a problem with ksh in that a while loop is failing to obey the "while" condition. I should add now that this is ksh88 on my client's Solaris box. (That's a separate problem that can't be addressed in this forum. ;) I have seen Lance's question and some similar but none that I have found seem to address this. (Disclaimer: NO I haven't looked at every ksh question in this forum)
Here's a very cut down piece of code that replicates the problem:
1 #!/usr/bin/ksh
2 #
3 go=1
4 set -x
5 tail -0f loop-test.txt | while [[ $go -eq 1 ]]
6 do
7 read lbuff
8 set $lbuff
9 nwords=$#
10 printf "Line has %d words <%s>\n" $nwords "${lbuff}"
11 if [[ "${lbuff}" = "0" ]]
12 then
13 printf "Line consists of %s; time to absquatulate\n" $lbuff
14 go=0 # Violate the WHILE condition to get out of loop
15 fi
16 done
17 printf "\nLooks like I've fallen out of the loop\n"
18 exit 0
The way I test this is:
Run loop-test.sh in background mode
In a different window I run commands like "echo some nonsense >>loop_test.txt" (w/o the quotes, of course)
When I wish to exit, I type "echo 0 >>loop-test.txt"
What happens? It indeed sets go=0 and displays the line:
Line consists of 0; time to absquatulate
but does not exit the loop. To break out I append one more line to the txt file. The loop does NOT process that line and just falls out of the loop, issuing that "fallen out" message before exiting.
What's going on with this? I don't want to use "break" because in the actual script, the loop is monitoring the log of a database engine and the flag is set when it sees messages that the engine is shutting down. The actual script must still process those final lines before exiting.
Open to ideas, anyone?
Thanks much!
-- J.
OK, that flopped pretty quick. After reading a few other posts, I found an answer given by dogbane that sidesteps my entire pipe-to-while scheme. His is the second answer to a question (from 2013) where I see neeraj is using the same scheme I'm using.
What was wrong? The pipe-to-while has always worked for input that will end, like a file or a command with a distinct end to its output. However, from a tail command, there is no distinct EOF. Hence, the while-in-a-subshell doesn't know when to terminate.
Dogbane's solution: Don't use a pipe. Applying his logic to my situation, the basic loop is:
while read line
do
# put loop body here
done < <(tail -0f ${logfile})
No subshell, no problem.
Caveat about that syntax: There must be a space between the two < operators; otherwise it looks like a HEREIS document with bad syntax.
Er, one more catch: The syntax did not work in ksh, not even in the mksh (under cygwin) which emulates ksh93. But it did work in bash. So my boss is gonna have a good laugh at me, 'cause he knows I dislike bash.
So thanks MUCH, dogbane.
-- J
After articulating the problem and sleeping on it, the reason for the described behavior came to me: After setting go=0, the control flow of the loop still depends on another line of data coming in from STDIN via that pipe.
And now that I have realized the cause of the weirdness, I can speculate on an alternative way of reading from the stream. For the moment I am thinking of the following solution:
Open the input file as STDIN (Need to research the exec syntax for that)
When the condition occurs, close STDIN (Again, need to research the syntax for that)
It should then be safe to use the more intuitive:while read lbuffat the top of the loop.
I'll test this out today and post the result. I'd hope someone else benefit from the method (if it works).
Someone can tell if it is possible, save a variable(a number (this number is a total of rows in a SQL tabel)) in like a memory or a file? and then, like 5 min later, check if the number is the same? and send me like a warning or alert for nagios?
Sounds like you are looking to do something like this:
#!/bin/sh
OLD_NUM=`command_to_get_number`
while true
do
sleep 5m
NEW_NUM=`command_to_get_number`
[ "$OLD_NUM" != "$NEW_NUM" ] && notify-send "Number changed"
OLD_NUM="$NEW_NUM"
done
notify-send will give you a desktop notification, not sure if there is a similar command to work with nagios.