I am trying to install PHPUnit_Selenium using the command
pear install phpunit/PHPUnit_Selenium
The version of pear that i am running is 1.9.4. The above command returned
Attempting to discover channel "phpunit"...
Attempting fallback to https instead of http on channel "phpunit"...
unknown channel "phpunit" in "phpunit/PHPUnit_Selenium"
invalid package name/package file "phpunit/PHPUnit_Selenium"
install failed
Searching google I found this (a few times) as a suggestion. So I tried
pear channel-discover pear.phpunit.de
and
sudo pear channel-discover pear.phpunit.de (incase it made a difference)
previous command returned
Discovering channel pear.phpunit.de over http:// failed with message: channel-add: Cannot open "http://pear.phpunit.de/channel.xml" (File http://pear.phpunit.de:80/channel.xml not valid (received: HTTP/1.1 403 Forbidden ( Forefront TMG denied the specified Uniform Resource Locator (URL). )
))
Trying to discover channel pear.phpunit.de over https:// instead
Discovery of channel "pear.phpunit.de" failed (channel-add: Cannot open "https://pear.phpunit.de/channel.xml" (Connection to `pear.phpunit.de:443' failed: Operation timed out))
What do I need to do to install PHPUnit_Selenium?
The PEAR channel for phpunit has been discontinued as of the end of April 2014, to install PHPUnit and PHPUnit_Selenium install via composer.
Configure your composer.json to the specific package version (See PHPUnit_Selenium)
In your composer.json file, write:
{
"require": {
"phpunit/phpunit": "*",
"phpunit/phpunit-selenium": ">=1.3.3"
}
}
Try the following command:
$ composer install
Use "pear.phpunit.de" instead of "phpunit"
sudo pear install pear.phpunit.de/PHPUnit_Selenium
Phpunit require curl to be installed,if you didn't install it try this:
sudo apt-get install curl libcurl3 libcurl3-dev php5-curl
sudo service apache2 restart
Maybe you need to specify a proxy for pear to route it's traffic through. Try something like:
$ sudo pear config-set http_proxy http://foo.bar/
$ sudo pear channel-discover pear.phpunit.de
$ sudo pear install phpunit/PHP_Selenium
Installing phpunit-selenium package in Ubuntu Trusty is as easy as running:
apt-get install phpunit-selenium
Related
I am installing Qlik Catalog SW on Linux Read Hat Enterprise 7.9 following the instructions of the installation guide.
I have got the first problem in Tomcat Installation. Basically, I am not able to connect to Tomcat with the browser.
Below is a detailed list of commands I have used.
I have tried it using Firefox.
When trying to install Chrome I got other issues.
Any hints?
*** Installing Chrome ***
# sudo yum install glib
# sudo yum list glibc
# sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current_x86_64.rpm
# sudo yum -y install redhat-lsb libXScrnSaver
# sudo yum -y localinstall google-chrome-stable_current_x86_64.rpm
>>>>>>>>>>>>>>>>>>>>>>>
Error: Package: google-chrome-stable-95.0.4638.54-1.x86_64 (/google-chrome-stable_current_x86_64)
Requires: libc.so.6(GLIBC_2.18)(64bit)
<<<<<<<<<<<<<<<<<<<<<<<
*** Installing Tomcat ***
Install wget (if not already installed):
# sudo yum install -y wget
Become the service account user:
# sudo su - qdcuser
Download Apache Tomcat and extract the file in usr/local/qdc:
$ cd /usr/local/qdc
$ wget https://archive.apache.org/dist/tomcat/tomcat-9/v9.0.38/bin/apache-tomcat-9.0.38.tar.gz
$ tar -xvf apache-tomcat-9.0.38.tar.gz
Overwrite <tomcat home>/conf/server.xml with the version expanded from the Qlik Catalog zip file:
$ cp /tmp/podium/config/tomcat9-server.xml /usr/local/qdc/apache-tomcat-9.0.38/conf/server.xml
Opening ports 8080 and 8443:
# sudo firewall-cmd --zone=public --permanent --add-port=8080/tcp
# sudo firewall-cmd --zone=public --permanent --add-port=8443/tcp
# sudo systemctl restart firewalld.service
Setup Apache Tomcat as a service to automatically start when Linux restarts:
# sudo cp /tmp/podium/config/tomcat.service /etc/systemd/system/
# sudo systemctl daemon-reload
# sudo systemctl enable tomcat.service
Edit the file /etc/systemd/system/tomcat.service to insert the correct user and group names:
# sudo nano /etc/systemd/system/tomcat.service
User=qdcuser
Group=qdcgroup
Start Tomcat manually:
$ cd /usr/local/qdc/apache-tomcat-9.0.38
$ ./bin/startup.sh
Browse to the following URL to verify that Tomcat is running:
https://localhost:8443
>>>>>>>>>>>>>>>>>>>>
Unable to connect
Firefox can’t establish a connection to the server at localhost:8443.
<<<<<<<<<<<<<<<<<<<<<
I too see this issue.. Here is what I think the reason might be..
rpm -qf /usr/lib64/libc.so.6
glibc-2.17-325.el7_9.x86_64
glibc is 2.17 on RHEL 7.9 The developers at google should know this which means it is a bug.
Or. They should provide that library as part of their package and statically link it.
Short answer. For now, until Google figures it out and fixes, I might either remove the package, or skip that package.
To skip..
sudo yum -y update --exclude google-chrome-stable*
To remove... Well.. "sudo yum -y remove google-chrome-stable"
An alternative until google resolve the problem is:
sudo yum update --skip-broken
This can install all updates and ignore chrome
I'm trying to run the Ampps local server 3.8 on Ubuntu. Mysql works good but apache doen't run.
When I type
/usr/local/ampps/apache/bin/httpd
I get
/usr/local/ampps/apache/bin/httpd: symbol lookup error: /usr/local/ampps/apache/lib/libapr-1.so.0: undefined symbol: dlopen
How to solve?
I experienced a similar problem. Firstly you must check is there anything that uses 80 port.
If any you kill that.
Then you backup libapr and then install libs again.
Run following commands:
cd /usr/local/ampps/apache/lib
sudo mkdir backup
sudo mv ./libapr* ./backup/
sudo apt-get -y install libaprutil1 libaprutil1-dev libapr1 libapr1-dev
and try run ampps.
(edited for clarity - rolled in accepted answer)
Libsodium has been prepped for PHP 7. In doing this, the namespace was removed and a prefix of sodium_ for methods and SODIUM_ for constants was added. Also the version methods were removed.
This github page documents all the new functions and constants and the project provides backward compatibility with the \Sodium namespace: https://github.com/Firehed/sodium/blob/master/src/we_cant_have_nice_things.php
Recipe: install Libsodium on PHP 7 on and AWS AMI
# PHP 7.0 Libsodium install AWS AMI
yum install -y php7-pear re2c php70-devel
yum groupinstall -y "Development Tools"
pecl7 install libsodium
vi /etc/php-7.0.d/20-libsodium.ini
; Enable libsodium extension module
extension=sodium.so
service httpd restart
command line test to verify sodium is installed
php7 --info | grep sodium
test php function to verify calling pattern for password hash
<?php
$password = "hello";
$hash_str = sodium_crypto_pwhash_str(
$password,
\SODIUM_CRYPTO_PWHASH_OPSLIMIT_INTERACTIVE,
\SODIUM_CRYPTO_PWHASH_MEMLIMIT_INTERACTIVE
);
var_dump($password, $hash_str);
Thanks to #GracefulRestart for the help.
I see a couple problems here, the first is that your test file appears to be non-functional.
Running your test code with libsodium working in PHP 7 returns the following error:
PHP Fatal error: Uncaught Error: Call to undefined function Sodium\\library_version_major()
If you want to check the version, it may be easier to search the data from the phpinfo() function:
<?php phpinfo(); ?>
# or from CLI
php7 --info |grep sodium
The other problem I notice is in your install steps, you install libsodium both from source and from PECL. The make install command by default places the libraries in /usr/local/lib, while pecl7 install libsodium will normally install libraries into the default PHP modules directory.
If you were attempting to install from source, your /etc/php-7.0.d/20-libsodium.ini file is incorrect as that is loading the libsodium libraries you installed from PECL (you can check which directory it is loading from by check the extension_dir ini setting from phpinfo()).
If you only need to install from PECL, you do not need all of the development packages or any manual compiling.
EDIT I modified your posted recipe to remove the extraneous steps of downloading the source and just do everything with PECL:
yum install -y php7-pear re2c php70-devel
yum groupinstall -y "Development Tools"
# PHP 7.0
pecl7 install libsodium
vi /etc/php-7.0.d/20-libsodium.ini
; Enable libsodium extension module
extension=sodium.so
service httpd restart
If the YUM repositories for your distribution offer the php7-libsodium package, that would be an even smaller recipe
Hope that helps
Here's my solution to this recipe.
wget -c https://download.libsodium.org/libsodium/releases/libsodium-1.0.18.tar.gz
tar -xvf libsodium-1.0.18.tar.gz
cd libsodium-1.0.18
./configure
make && make check
make install
sudo pecl7 install -f libsodium
pecl7 should install and modify the php.ini file to include the following in the php.ini
extension="sodium.so"
If you running PHP in Elastic Beanstalk, the following file ./ebextentions/script.config :
files:
"/opt/elasticbeanstalk/hooks/appdeploy/pre/001_libsodium.sh":
mode: "000755"
owner: root
group: root
content: |
#!/usr/bin/env bash
wget -c https://download.libsodium.org/libsodium/releases/libsodium-1.0.18.tar.gz && tar -xvf libsodium-1.0.18.tar.gz && cd libsodium-1.0.18 && ./configure && make && make check && sudo make install && sudo pecl7 install -f libsodium
I installed nginx, php, php-fpm, php-pecl-redis by yum.
All of them work but the last one.
When I run /usr/sbin/php-fpm, I got this:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/redis.so' - /usr/lib/php/modules/redis.so: undefined symbol: igbinary_unserialize in Unknown on line 0
I don't know what igbnary_unserialize means and how to fix it.
I checked the redis.so file under right path. I add extension=redis.so to php.ini
PHP version: 5.3.3
PhpRedis version: 2.2.7
I had the same issue. I'm on Ubuntu 16.04 LTS. Running sudo apt-get install php-igbinary resolved the issue for me. I have other issues, but that's what solved this one.
For people who are upgrading their php from 7.0 to 7.4 like me, and not able to get php-redis working. These are the steps I used after following the answers above.
1) remove Redis
sudo apt purge php-redis
2) Install Igbinary
sudo apt-get install php-igbinary
3) Install php-redis again
sudo apt-get install php-redis
I did the steps above because it seems only php7.0 is recognising the php-redis install but not the currently enabled php7.4
I also recommend removing other versions of PHP if you have should your problem continue unsolved.
Probably an issue with igbinary, is this installed? (try for example: cat /etc/php.d/igbinary.ini).
Here you can find and install igbinary
Related to this bug https://bugs.launchpad.net/ubuntu/+source/php-redis/+bug/1762935
You should remove php-redis from packages:
apt purge php-redis , and install it via pecl install redis
You should add "extension=redis.so" to php.ini
and remove redis from config.d in your php directory:
rm /etc/php/7.2/fpm/conf.d/#20-redis.ini
and
rm /etc/php/7.2/cli/conf.d/#20-redis.ini
restart php fpm and you will see that problem solved
On Ubuntu 20 and PHP 7.4
I did this and it worked :
sudo apt purge php-redis
sudo apt intall php-redis php7.4-redis
TEST redis server :
$ php --ri redis
or
$ redis-cli ping
$ redis-cli info stats
just resolve the same problem:
php-pecl-redis installed by yum will cause this problem.
so you need to install the php-redis manually. wget the package and phpize - configure - make ....
I'm running Ubuntu Server 12.10 and have installed phalcon like this
sudo apt-get install php5-dev php5-mysql gcc git-core
git clone git://github.com/phalcon/cphalcon.git
cd cphalcon/build
sudo ./install
then I've added
extension=/usr/lib/php5/20100525/phalcon.so
to php.ini which located in /etc/php5/apache2/php.ini and restarted apache2. If I execute
<?php print_r(get_loaded_extensions()); ?>
I can see that the phalcon extension is loaded. Then I've installed phalcon-devtools like that
git clone git://github.com/phalcon/phalcon-devtools.git
cd phalcon-devtools
sudo ./phalcon.sh
and restarted apache2. No errors were shown during that operations, but when I'm trying to execute
phalcon commands
I get an error like this
PHP Fatal error: Class 'Phalcon\Script\Color' not found in /home/user/phalcon-devtools/phalcon.php on line 84
What I'm doing wrong?
So the problem was in php.ini for CLI, which is located in /etc/php5/cli/, after I added extension=/usr/lib/php5/20100525/phalcon.so there, I was able to use Devtools. Thanks to #NikolaosDimopoulos
Official documentation is a bit confusing so try this:
I think this is a problem of extension not loaded
After successfully compile steps:
sudo apt-get install php5-dev php5-mysql gcc git-core
git clone git https://github.com/Phalcon/cphalcon.git
cphalcon cd/build
sudo ./install
Create a new file called "30-phalcon.ini"
and within it call the extension Phalcon with this single line:
extension=phalcon.so
save the file and copy the folder "/etc/php5/apache2/conf.d /" and "/etc/php5/cli/conf.d/"
restart the server: sudo service apache2 restart
While the devtools do this:
sudo git clone https://github.com/phalcon/phalcon-devtools /var/www/devtools
then create a symbolic link to run via terminal:
1: sudo ln -s /var/www/devtools/phalcon.php /usr/bin/phalcon
2: sudo chmod ugo+x /usr/bin/phalcon
3: type "phalcon" in the terminal and see if it's work.
it should work now: D
I always install the devtools from the PEAR channel
pear channel-discover pear.phalconphp.com
pear install phalcon/Devtools
You might get an error that the Devtools are not in stable mode but (as of the time of this writing) you can use this command:
pear install phalcon/Devtools-0.5.0
Source