In Intellij/Appcode, is there any option or plugin I can use so that when I press a certain key(e.g. up arrow) it will increase the selected value by 1 like web developer tool?
String Manipulation plugin may be what you are looking for, it has the following feature:
Increment/Decrement selected text. Duplicate line and increment/decrement all numbers found. (Does not work in column mode)
There is also a related feature request.
Related
I'm a DNN beginner. I am currently building a module in which I can display statistics. My DotNetNuke Version is 7.0. The statistic is from Chartjs. For this statistic I would like to implement filters. These filters should be datepickers. As UI element I have now included a textbox with TextMode='Date'. But currently I have problems to set the default value of this field. The default value should be 01.01. of the current year.
I have already tried to set the value via C# server side. Unfortunately without success. I also tried to set the value on the client side via JavaScript. Unfortunately also without success.
These are some lines I tried in JavaScript:
document.getElementById(<%= this.DatumVon.AccessKey %>).value = "01.01.2019";
document.getElementById(<%= this.DatumVon.AccessKey %>).innerText = "01.01.2019";
document.getElementById("DatumVon").value = "01.01.2019";
These are some lines I tried in C# in the method "Page_Load" (server side):
this.DatumVon.Text = "01.01.2019";
I expected the value of the TextBox to be 01.01.2019. However, it currently only contains dd.mmm.yyyy. How can I change this?
Thank you.
There is something wrong with your localization. Please refer to the jQuery UI datepicker documentation (the "Localization" section), this should give you the answer.
wow... I solved it. I made it. Sometimes the solution is right in front of you and you don't see it. Michael Tobisch was absolutely right. When setting the value, the format is very important. I have always used the German format. A DNN TextBox with TextMode="Date" can't handle that. DNN converts this TextBox into an HTML input field. But this input field can only be clear with the format "yyyy-mm-dd". Depending on the geographical position of the client (at least that's what I think) the text displayed in the input field will be formatted. But the value of the input field always has the same format ("yyyy-mm-dd"). So very important here: the displayed text and the actual value have different formats.
Many thanks again to Michael Tobisch for the mental inspiration and the patience with me.
What is also important is that the access to the actual ID of a DNN element works as follows: this.Element.ClientID and not as I assumed before this.Element.AccessKey. This was also buggy.
I have been developing a web application using domino, therein I have dblookup-ing the field from notes client; Now, this is working fine but the format of value is missing while using on web.
For example in lotus notes client the field value format is as above
I am one, I am two, I am one , I am two, labbblallalalalalalalalalalalalalalalalalalaallllal
Labbbaalalalallalalalalalaalallaal
Hello there, labblalalallalalalllaalalalalalalalalalalalalalalalalalalalalalalala
Now when I retrieve the value of the field on web it seems it takes 2 immediate after 1. and so forth, I was expecting line feed here which is not happening.
The field above is multi valued field. Also on web I have used computed text which does db lookup from notes client.
Please help me what else could/alternate solution for this case.
Thanks
HD
Your multi-valued field has display options associated with it and the Notes client honors those. Obviously, your options are set up to display entries separated by newlines.
The computed text that you are using for the web does not have options like that and the field options are irrelevant because you aren't displaying the field. Your code has to insert the #Newlines. That's pretty easy because #DbLookup returns a list, and if you concatenate a list and a scalar, the scalar will be appended to each element of the list. (Look at the third example under "concatenation, pairwise" here to see what I mean.
The way you've worded your question is a little unclear to me, but what you need in your computed text formula is either something like this:
list := #DbLookup(etc,. etc.);
list + #Newline;
Or something like this:
multiValueFieldContainingListWithDbLookupResult + #NewLine;
I used #implode(Dblookupreturnedvalue;"");
thanks All :)
In PsychoPy builder, I have a lot of trials and I want to let the participant take a rest/break part way through and then press SPACE to continue when they're ready.
Any suggestions about how best to do this?
PsychoPy Builder uses the TrialHandler class and you can make use of its attributes to do control when you want to take a rest.
Assuming you're trial loop is utilising an Excel/csv file to get the trial data then make use of trialHandler's attribute : thisTrialN
e.g.
1/ Add a routine containing a text component into your loop (probably at the beginning) with your 'now take a rest...' message and a keyboard component to take the response when they are ready to continue.
2/ Add a custom code component as well and place something similar to this code into its "Begin Routine" tab:
if trials.thisTrialN not in [ int(trials.nTotal / 2) ]:
continueRoutine=False
where 'trials' is the 'name' of your trial loop.
The above will put a rest in the middle of the current set of trials but you could replace it with something like this
if trials.thisTrialN not in [10,20]:
continueRoutine=False
if you wanted to stop after 10 and again after 20 trials.
Note, if you're NOT using an Excel file but are simply using the 'repeat' feature of a simple trial loop, then you'll need to replace thisTrialN with thisRepN
If you're using an Excel file AND reps you'll need to factor in both when working out when you want to rest.
This works by using one of Builder's own variables - continueRoutine and sets it false for most trials so that most of the time it doesn't display the 'take a rest' message.
If you want to understand more, then use the 'compile script' button (or F5) and take a look at the python code that Builder generates for you.
I'm using decode for my query but when every time I run my query, there's a two dialog box appeared and need to input some number in those dialog box before to see the result. What should I need to remove it?
Please help me.
Thank you.
Here's some of my query..
SELECT (CODE_SALESROOM) POS_ID
,DECODE(CODE_SALESROOM, '60001', 'ABM SYSTEM'
,'50001', 'Acenet Unlimited Business Computer'
,'40002', 'RL My Phone - Robinsons Galleria') AS POS_NAME
FROM OWNER_DWH.DC_SALESROOM
WHERE CODE_SALESROOM NOT IN ('XAP', 'XNA', '10001')
Sounds like you're being prompted for substitution variables, because part of your query has somethling like and col = 'AT&T' - the ampersand is interpreted as a variable by default, and you're prompted for a value for &T (or whataver your actual value is interpreted as).
You can add set define off to your script to stop it looking for, and prompting for, a value when that is not what you want.
(The links are for SQL*Plus documentation, but much of that applies to SQL Developer as well; the documentation for that is a bit sparser),
I'd like to force the user to chose between Yes and No, and not let him add an entry where the value is initial.
This is regardless of whether I check the Initial checkbox in the table definition.
Can this be done?
Domain data type : CHAR, 1 character, no conversion routine.
Value range: single values:
'1' description = 'Yes'
'2' description = 'No'
By far the easiest way is to use a data element in the table that only allows non-initial values.
If you can't change the data element, you can try using table maintenance events in the table maintenance generator:
You may be able to use event 1 (Before save) or event 5 to build a manual check, but 5 does not kick off on change.
If that doesn't work, you can still manually add a check in the PAI of the screen, however you run the risk that if someone regenerates the maintenance scree, they will forget/not know to put the check back in.
You can set the compare flag:
But from what I've seen the flag doesn't actually force you to redo any of the changes, and is still pretty easy to miss.
You can edit the screen and set the field to mandatory. Be aware that you will loose the change if the screen is re-generated.
You can do that with that steps:
in SE11 choose the Utilities menu -> Table Maintenance Generator
in the Table Maintenance Generator go to menu Environment -> Modification -> Maintenance Screens, then select the screen (usually is 0001), in the Element List Tab you find the Special attr, in the field Input, you choose Required for the field you want obligatory.
Thanks.
Regards.
Gil Mota.