Can anyone explain what will happen in following scenario?
SELECT *
FROM A,
B
LEFT JOIN C
ON B.FIELD1=C.FIELD1
WHERE A.FIELD1='SOME VALUE'
Here table A and table B are not joined with any condition. So my doubt is what kind of join will be applied between A and B?
A cross join (cartesian product, if you prefer) will be applied between the results of A and B left join C: each row in the first set will be tied to each row in the second set.
A cross join applies, If you don't used a join condition, get irrelavent results also.
Please try it
SELECT * FROM A INNER JOIN B ON A.IDCOLUMND=B.IDCOLUMN LEFT JOIN C ON B.FIELD1=C.FIELD1
Related
I'd like to know if anyone would know an elegant and scalable method to full outer join multiple tables, given that I might want to regularly add new tables to the join?
For now my method consists in full joining table A with table B, store the result as a cte, then full joining the cte to table C, store the result as a cte2, full joining cte2 to table D... you got it.
Creating a new cte every time i want to add another table to the join is not very practical, but every other solutions i found so far have the same issue, there's always some kind of infinite looping either on ctes or in selects (like SELECT blabla FROM (SELECT blabla2 FROM..)).
Is there any way that i don't know that would help me perform this multiple full join without falling in an infinite recursive loop of ctes?
Thanks
EDIT: Sorry it seems it wasn't clear enough
When i perform a multiple full join in one query like:
SELECT
a.*, b.*, c.*
FROM
tableA a
FULL JOIN
tableB b
ON
a.id = b.id
FULL JOIN
tableC c
ON
a.id = c.id
If the id is present in tableB and tableC but not tableA, my result will create two lines where there should be one, because i joined b to a and c to a but not b to c. That's why i need to full join the result of the full join of a and b to c.
So if i have let's say five table instead of three, i need to full join the result of the full join of the result of the full join of the result of the full join... x)
This fiddle illustrates the problem.
If you want the rows from tables B and C to join, you need to accomodate the fact that maybe the data comes from table B and not A. The easiest is probably to use COALESCE.
Your join should therefore look like:
SELECT a.*, b.*, c.*
FROM tableA a
FULL JOIN tableB b ON a.id = b.id
FULL JOIN tableC c ON COALESCE(a.id, b.id) = c.id
-- FULL JOIN tableD d ON COALESCE(a.id, b.id, c.id) = d.id
-- FULL JOIN tableE e ON COALESCE(a.id, b.id, c.id, d.id) = e.id
Most databases that support FULL JOIN also support USING, which is the simplest way to do what you want:
SELECT *
FROM tableA a FULL JOIN
tableB b
USING (id) FULL JOIN
tableC c
USING (id);
The semantics of USING mean that only non-NULL values are used, if such a value is available.
Are next two queries going to return same result set?
SELECT * FROM tableA a
JOIN tableB b
ON a.id = b.id
WHERE a.id = '5'
--------------------------------
SELECT * FROM tableA a
JOIN tableb b
ON a.id = b.id
WHERE b.id = '5'
Also, will answer be different if LEFT JOIN is used instead of JOIN?
As written, they will return the same result.
The two will not necessarily return the same result with a left join.
Yes the result will be the same.
With a left join you will get every dataset of both table who got a ID.
With a join (Inner Join) you will get only the dataset's who a.id = b.id.
This site will explain you how to join https://www.w3schools.com/sql/sql_join.asp
Yes they will. A simple join works like an inner join by default. It checks for instances where the item you're joining on exist on both tables. Since you're joining on where a.id=b.id the results will be the same.
If you change the type of join to a left, the results will include all a.id's regardless of whether they are equal to 5.
Can sombody Explains me about joins?
Inner join selects common data based on where condition.
Left outer join selects all data from left irrespective of common but takes common data from right table and vice versa for Right outer.
I know the basics but question stays when it comes to join for than 5, 8, 10 tables.
Suppose I have 10 tables to join. If I have inner join with the first 5 tables and now try to apply a left join with the 6th table, now how the query will work?
I mean to say now the result set of first 5 tables will be taken as left table and the 6th one will be considerded as Right table? Or only Fifth table will be considered as left and 6th as right? Please help me regarding this.
When joining multiple tables the output of each join logically forms a virtual table that goes into the next join.
So in the example in your question the composite result of joining the first 5 tables would be treated as the left hand table.
See Itzik Ben-Gan's Logical Query Processing Poster for more about this.
The virtual tables involved in the joins can be controlled by positioning the ON clause. For example
SELECT *
FROM T1
INNER JOIN T2
ON T2.C = T1.C
INNER JOIN T3
LEFT JOIN T4
ON T4.C = T3.C
ON T3.C = T2.C
is equivalent to (T1 Inner Join T2) Inner Join (T3 Left Join T4)
It's helpful to think of JOIN's in sequence, so the former is correct.
SELECT *
FROM a
INNER JOIN b ON b.a = a.id
INNER JOIN c ON c.b = b.id
LEFT JOIN d ON d.c = c.id
LEFT JOIN e ON e.d = d.id
Would be all the fields from a and b and c where all the ON criteria match, plus the values from d where its criteria match plus all the contents of e where all its criteria match.
I know RIGHT JOIN is perfectly acceptable, but I've found in my experience that it's unnecessary - I almost always just join things from left to right.
> Simple INNER JOIN VIEW code...
CREATE VIEW room_view
AS SELECT a.*,b.*
FROM j4_booking a INNER JOIN j4_scheduling b
on a.room_id = b.room_id;
You can apply join like this..
select a.*,b.*,c.*,d.*,e.*
from [DatabaseName].[Table_a] a
INNER JOIN [DatabaseName].[Table_b] b ON a.id = b.id
INNER JOIN [DatabaseName].[Table_c] c ON b.id=c.id
INNER JOIN [DatabaseName].[Table_d] d on c.id=d.id
INNER JOIN [DatabaseName].[Table_e] e on d.id=e.id where a.con=5 and
b.con=6
Here, at place of a.* and in where condition, you can show column(filed) which you like and according condition in where condition. You can insert more table and database as per your choice. But mind that you need to mention database name and alias if you work in different database.
Just tried the following from the Example DataBase given in W3School. Worked Fine for me.
SELECT Orders.OrderID, Customers.CustomerName, Orders.OrderDate, Products.ProductName, Products.ProductID
FROM Orders
INNER JOIN Products
INNER JOIN Customers
ON Orders.CustomerID=Customers.CustomerID;
Join used to combine rows from two or more tables, based on a related column between them. This example from Adventure works:
SELECT a.[EmailAddress],b.[FirstName],b.[LastName],c.[PhoneNumber],d.[Name]
FROM [Person].[EmailAddress] a
INNER JOIN [Person].[Person] b
ON a.BusinessEntityID = b.BusinessEntityID
INNER JOIN [Person].[PersonPhone] c
ON b.BusinessEntityID = c.BusinessEntityID
INNER JOIN [Person].[PhoneNumberType] d
ON c.phoneNumberTypeID = d.phoneNumberTypeID
I have three tables, I'll call them table A, B and C here. Table A has a one to many relation to B and B has a one to many relation with C. For this query, I only want disctinct values from C, but the query below will give me multpile C records that match B.
Right now my query is as such:
Select * from A Left Outer Join B on A.key = B.key Left Outer Join C on B.AltKey = C.AltKey
Any ideas?
Many thanks in advance.
Why are you using LEFT OUTER JOIN? Try switching that with plain old JOIN and see if you get what you're looking for.
Select distinct C.* from C
Left Outer Join B on C.a = B.a
Left Outer Join A on B.a = A.a
There are two tables A and B. You are retreiving data from both tables where all rows from B table and only matching rows from A table should be displayed. Which of the following types of joins will you apply between A and B tables?
- Inner join
- Left outer join
- Right outer join
- Self join
Use left outer hoin or right outer join.
For example, the following satisfy your requirement.
select * from tableB
Left outer join tableA
on tableB.ID= tableA.ID
Or
select * from tableA
Right outer join tableB
on tableA.ID= tableB.ID
Better way to understand:
Easy, I would go with (B).
SELECT * FROM B x
LEFT JOIN A y
on x.someColName = y.someColname
EDIT: can also use Right join
SELECT * FROM A x
RIGHT OUTER JOIN B y
on x.someColName = y.someColname
This looks like homework, but it's dead simple enough that I'll just say that you're asking for B LEFT JOIN A.
Join Left
http://www.w3schools.com/Sql/sql_join_left.asp