I am building worklight project using eclipse environment when i run the project , i need to connect my tablet to local network then only i works for me for all the server updates and all.
I just want to move worklight server on http server which i can access using http://publicurl/anyprject which runs on apache. Now i want to work on eclipse but whenever i deploy the project it should deploy on public so that i can access it from anywhere.
Just tell me the process and what the thing i need to move on public server.
Since you've come here to ask a question, please also take a moment to write properly structured and coherent sentences in English. This will only benefit everyone and you will get a better answer, and faster too.
Try the following:
Instead of choosing Build All and Deploy, try choosing Build for Remote Server; there you should input the external (public) IP address of your machine. Next, run the generated project in your device. This should allow it to connect to the Worklight Server.
Note that both the Worklight Server (or rather, the machine that hosts it) and the device must be on the same network, in this case - connected to the public Internet.
Based on your comment, you can:
I would seriously try to open your own machine to public access
If not possible, I would try to move to develop on the Linux machine instead
If not possible, then you must install Worklight Server on the Linux machine and whenever you make changes to the project - deploy the updated .war, .wlapp and .adapter files to your installation on the Linux machine
Build the app with Build for Remote Server so that it will connect to the Linux machine instead of the local development machine
Step 3 above means you'll need to maintain 2 development environments, which is not so easy.
If you are during development, you should aspire for options 1 or 2; in other words, create a proper development environment. In Mobile, this requires public Internet access (usually).
Are you a stand alone developer, Business Partner or a Customer of IBM?
Related
I have done a project for BE and FE (Express.js and Nuxt.js), but when it build and run it via putty on ubuntu server, this is what I get
Is that a way to make it live using Putty?
And what happens if I close Putty, will Express and Nuxt still be running on the server?
This is not a conventional way of exposing something to the Internet since it's not publicly facing the Internet (the only way right now to have access to your apps is to know the IP of the server, username + password of the SSH account).
Also, you're running the server in dev mode here, not something optimized in terms of speed.
You will need to use yarn generate (or yarn build) then yarn start on Netlify, Vercel or any platform like that for your Frontend (free service usually if using SSG).
Here is a whole list of places and how to host there for the frontend: https://nuxtjs.org/deployments
As for your backend, you may host it on Heroku, Render.com, Railway or any place of your choice (with a Node.js available).
Even a bare metal SSD can be good for such but it will require more setup overall.
Here is my working context;
no internet (I use my company's intranet)
Linux CentOS 7.9 remote server with my source files
PhpStorm 2021.3.2 on my development PC
My wish is to develop on my PC on remote sources. Your new JetBrains Gateway solution seems to meet my expectations on paper.
However, in practice, I have the impression that it is not possible to use this solution without internet ? Indeed, the connection process stops on this failure:
Looks like your solution is trying to download an IDE client to install on my machine. Which from my point of view is a weird behavior because I already have a client to install on my machine: PhpStorm. Why not use my PhpStorm client already installed on my machine ?
Thank you for your reply
The "Jetbrains Client" mentioned in the error message is not for your local machine, but for the Linux server:
Once the IDE version and project directory are selected, Gateway will download the IDE to the remote server, unpack it, and launch it with your project loaded.
It acts on the remote server as a "backend IDE" to which the client on your local machine connects:
The JetBrains Client runs locally and provides the user interface for the IDE backend.
You would not even require the full PHPStorm IDE, the Jetbrains Gateway is a standalone app that comes with a "thin client" that can connect to the backend IDE:
This whole process is managed by JetBrains Gateway, a new, compact, standalone app that provides everything you need to get started with remote development. Since it’s standalone, it’s the only thing you need to install locally to start working and is ideal for less powerful laptops and in cases where a full IDE install isn’t desired.
See https://blog.jetbrains.com/blog/2021/12/03/dive-into-jetbrains-gateway/ for a more detailed look at how it works.
To answer your question: it is not possible to use Jetbrains Gateway without an internet connection.
I am using worklight 5.0.6 in Eclipse juno on Windows 7.
I made a simple form filling app. I am deploying this app on my PC, Making it a worklight server. I am accessing it from the instance of the app which is running on my phone.
It works fine as long as my Phone and PC are on the same network, that is, on local LAN.
But when I change the network to Internet, the app is not able to connect to the worklight server - which is, again, my PC.
My Questions are:
Where should i put the public IP address to access the worklight server?
Should i change the worklight version to make it work?
Also, I read solutions that you gotta run the "Build and deploy on remote servers" But i couldn't find the option for it, what i found was "Run on Server"
But i really don't know how to proceed after that.
Should i change the worklight version to make it work?
You should upgrade your Worklight from 5.0.6 to a later release regardless of the connectivity problem - it is a very, very, old release.
Also, I read solutions that you gotta run the "Build and deploy on
remote servers" But i couldn't find the option for it, what i found
was "Run on Server"
This is not related to what you are facing. This option is meant to be used as you prepare to move the development environment (the developer workstation) to other environments, such as QA, UAT and Production. This feature is meant to change the connectivity settings in the application. Again, not relevant for you at this time.
But when I change the network to Internet, the app is not able to
connect to the worklight server - which is, again, my PC.
The problem you are experiencing is expected. There is your PC, which acts as the local server, connected to the Internet via your router. And there is the device, also connected to the same network via the router.
As you disconnect the device from the local network, it is no longer able to connect to the server, which is still in the local network.
If you want that work still, you'd need to setup a server with an external IP address that your device will attempt to connect to, and be able to route the request to the Worklight Server... in short, in a development environment it is expected that you will be on the same network.
I developed an android based hybrid app in the IBM MFP-7.0., My app is fetching the data from the Java service which is running in Tomcat Server. Here the app adapters are running in my local system MFP server to get the data from the Java service, So that I can only run the app in my local system android emulator. Now, we want to deploy the app in the cloud so that we can give this app to our users. Can some body help me how to run our MFP app in the cloud? Is it required to place eclipse in the cloud to run my MFP server like the way I am running in my local system?
Thanks in advance.
It looks to me like your understanding is completely lacking in this subject matter. Also note that this question has got nothing to do with programming.
You need a host machine. On this server you will run an application server (Tomcat, WebSphere Full profile, WebSphere Liberty profile - either single or a farm, depending on your required network topology and security & scalability needs).
On this application server you deploy MobileFirst
You will also need a database
This host machine needs to be accessible (with appropriate security) to the public Internet so that it could serve apps installed in end-users' devices
The application needs to be configured to send requests to the server (or to any front-side server like a Load Balancer, again, depending on your topology)
The generated application needs to be submitted to an App Store so that users could download and install it on their devices
I suggest that you will do some reading before asking any question. Since you're using IBM MobileFirst, start by reading the user documentation: http://www-01.ibm.com/support/knowledgecenter/SSNJXP/welcome.html
Right now i am developing an app on remote DEV server. Every time when i update the code (js,html,css etc) then test on the device locally. There is a popup to force me to update the app. But my app need to connect DEV server for testing some backend feature like login.
DEV server is a remote Websphere running WL6.1 for development purpose. Why i need it because my app connect to some web services like Auth server via internal environment (actually is VPN). And those services i cannot set up easily in local environment. That makes using localhost for development is not really possible.
My problem is feeling the development process not really handy. Every time i change the code and want to run on the devices. I need to upload the .wlapp via console. It takes time! Everyday i change the code thousands time. That's why i need a solution.
And now i am seeking for 2 possible ways:
Auto push the .wlapp to remote server when i run and build. Can ANT do that? i read the Doc and find it's a bit of complicated.
Disable Direct Update. Actually i do a tricky hack inside worklight.js to override this feature. But i think it is not a good solution. So, is there any server config can switch the that off?
And i read this thread IBM Worklight - How to disable Direct Update?
Not working.
From what you are describing, things seem to work exactly as they should.
You have your local Worklight Development Server (that's the Worklight Studio plug-in you've installed in your Eclipse).
You have a remote server - here I am presuming this is actually some application server with Worklight Server deployed on it (that is, not the plug-in, but an actual installation of the server component) as well as your deployed project's .war file.
If that's not your setup, you need to think again about your 'testing setup'.
Auto push the .wlapp file to remote server. So the dev server always
keep the latest resource. Not to force me "update" the older version
on the server.
No. You can't do this. You need to manually build your app with the correct connectivity settings for the remote server via Run As > Build Settings and Remote Target.
In addition to the native project that will now contain these connectivity settings for the actual app, you will also have a .wlapp file in the bin folder. You will need to manually deploy it each time you're changing your app's contents. That's why you do development testing in the local development server... when moving to a remote server, that's for QA/UAT/PROD purposes usually.
Just disable this annoying feature in DEV environment.
You will need to do this in both servers via their respective Worklight Console as described in the question you've linked to, so that once you deploy the .wlapp file, it will not send a Direct Update request.
Instead, you'll need to manually re-install the app each time.
I suspect you didn't do this action on the remote server?
If you did, then you need to explain your setup, as the only thing you've wrote about was its name... "dev".
No. You need to manually deploy the .wlapp to your remote server.