I'm trying to run rvm on Angstrom linux on BBB.
When i try to launch rvm, i obtain:
RVM can not be run with set -o posix, please turn it off and try again.
Someone know about this?
This is a check to prevent running RVM from pure Sh shells, for proper functioning RVM requires Arrays(along other features) which are only available in Bash and Zsh.
Answer shared by #mapapis was useful to understand the reason (thanks) but I think precise steps to change the default login shell complement this and are useful.
As stated here you may need to change the login shell for your user in order to use the shell of your preference by default, in my case is bash so I made some changes the way I launch my terminal.
chsh is advised but in my particular case I'm using ConEmu Windows Terminal with Cygwin in a Windows 10 environment; sh.exe is used by default thus this RVM warning...
chsh is not available in Cygwin, so I followed this reccomendation that states that:
it is just a matter of changing (...) whatever shortcut you
are using to start cygwin to call {prefered shell here} instead
I hope this is useful. Gretings!
Related
At first, I tried to fix my problem of npm instruction
so I added
[interop]
appendWindowsPath = false
to /etc/wsl.conf
It works, but another problem happen.
When I type code .
Command 'code' not found, did you mean:
command 'node' from deb nodejs (12.22.9~dfsg-1ubuntu3)
command 'cdde' from deb cdde (0.3.1-1build1)
command 'ode' from deb plotutils (2.6-11)
command 'tcode' from deb emboss (6.6.0+dfsg-11ubuntu1)
command 'cde' from deb cde (0.1+git9-g551e54d-1.2)
Try: sudo apt install <deb name>
The above Error message appear.
I tried the following instruction
export PATH=$PATH:"/mnt/c/Users/%USERNAME%/AppData/Local/Programs/Microsoft VS Code/bin"
It also works properly.
Whenever I restarted WSL, npm instruction still worked well, but code instruction lost its function again.
What should I do to fix the problem?
Thanks in advance!
My main suggestion would be to not use appendWindowsPath = false to fix your NPM problem. That's like using a sledgehammer as a flyswatter. As I said in this answer:
Please do not follow the recommendations (like this answer) to completely remove all Windows paths from WSL, as that will severely limit your ability to run Windows applications in WSL (one of its great features).
You'll also lose access to the ability to run PowerShell scripts and commands in WSL easily. You won't have direct access to wsl.exe itself from inside WSL (which comes in handy).
You can type the full paths to these commands, of course, but most instructions and other answers you find here are going to assume that you've left the Windows path intact.
Instead, figure out where npm is installed in your WSL distribution and then determine why it is further toward the end of the PATH than your Windows directories. Windows paths are added at the end of the Linux PATH for a reason. If something in your startup files is adding to the path, it should put it at the beginning, so it has precedence. E.g.:
export PATH="newdir:$PATH"
Note that I'm not saying that you should change your export statement above since, as mentioned, that Windows path would normally come at the end anyway. It's really not going to matter unless you put another code executable somewhere else in your path.
Whenever I restarted WSL, npm instruction still worked well, but code instruction lost its function again.
If you do want the "quick and dirty" (not recommended) solution, then you can simply add that export command that "makes it work" to your ~/.bashrc. That file is processed each time the Bash shell starts interactively.
I have properly installed and setup WSL2. It works fine.
I also setup X11 forwarding and X server (VcXsrv). I can launch GUI apps such like konsole or gvim or even google-chrome from a bash shell.
Now I want to launch konsole by simply double clicking a short cut on the desktop without launching the bash command mode terminal. How should I do it?
I tried running this in cmd:
> wsl /usr/bin/konsole
and it reports:
qt.qpa.xcb: could not connect to display
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
I'm guessing it is because some X11 forwarding configurations were not properly setup, so I created a k.sh as follows:
#!/usr/bin/bash
export DISPLAY=$(cat /etc/resolv.conf | grep nameserver | awk '{print $2; exit;}'):0.0
export LIBGL_ALWAYS_INDIRECT=1
/usr/bin/konsole &
The first two lines were the X11 settings in my .bashrc, the last line launches konsole.
It works fine under bash environment; but when I ran
wsl k.sh
from windows cmd environment, it silently quitted without launching the konsole.
I'm out of ideas. What should I do to directly launch konsole or other Linux GUI apps under windows without having to getting into bash?
Thanks in advance.
You are asking about two different command-lines, and while the failures in running them via the wsl command have the same root-cause, the underlying failures are likely slightly different.
In both cases, the wsl <command> invocation results in a non-login, non-interactive shell where the command simply "runs and exits".
Since the shell is non-login/non-interactive, your startup files (such as ~/.bashrc and ~/.bash_profile, among others) are not being processed.
When you run:
wsl /usr/bin/konsole
... the DISPLAY variable is not set, since, as you said, you normally set it in your ~/.bashrc.
Try using:
wsl -e bash -lic "/usr/bin/konsole"
That will force bash to run as a login (-l), interactive (-i) shell. The DISPLAY should be set correctly, and it should run konsole.
Note that the quotes probably aren't necessary in this case, but are useful for delineating the commands you are passing to bash. More complicated command-lines can be passed in via the quotes.
As for:
wsl k.sh
That's likely a similar problem. You are doing the right thing by setting DISPLAY in your script, but I notice that you aren't using a fully-qualified path it. This would normally work, of course, if your script is in a directory on the $PATH.
But I'm guessing that you might add that directory to the $PATH in your startup config, which means (again) that it isn't being set in this non-login, non-interactive shell.
As before, try:
wsl -e bash -lic "k.sh"`
You could also use a fully-qualified path, of course.
And, I'm fairly sure you are going to run into an issue with trying to put konsole in the background via the script. When WSL exits, and the bash shell process ends, the child konsole process will terminate as well.
You could get around this with a nohup in the script, but then you also need to redirect the stderr. It's probably easiest just to move the & from the script itself to the command-line. Change your k.sh to:
#!/usr/bin/bash
export DISPLAY=$(cat /etc/resolv.conf | grep nameserver | awk '{print $2; exit;}'):0.0
export LIBGL_ALWAYS_INDIRECT=1
/usr/bin/konsole
Then run it with:
wsl -e bash -lic "k.sh &"`
Finally, a side note that when and if you can upgrade to Windows 11, it will automatically create Windows Start Menu entries for any Linux GUI app you install that creates a .desktop file. You can manually create .desktop files to have WSL create Start menu items for most applications.
For reference, in Windows 11 it's easier. To run a GUI application without a terminal window popping up, you just need to call wslg.exe instead of wsl.exe.
So, for example:
target: C:\Windows\System32\wslg.exe konsole
start in: C:\WINDOWS\system32
shortcut key: None
comment: Konsole
This tutorial shows how to install VcXsrv and and edit .bashrc to ensure that the "DISPLAY env var is updated on every restart".
DISPLAY env var needs to be dynamic setting.
I've used it successfully with WSL2 on Windows10 Version 21H2 (OS build 19044.2130) to run Chrome, Edge, and thunar. I'm using the Ubuntu 20.04 Linux distro.
To edit .bashrc follow these instructions.
I am using Ubuntu via WSL 2.0 on Windows 10 and would like to run Texlive from the Windows command line. To do so I prepended the Texlive folder to the path in /etc/environment (I also tried a number of other locations eg. $HOME/.bashrc):
C:\Users\scott\Documents>wsl echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/mnt/c/Windows/system32:...
C:\Users\scott\Documents>wsl
scott#SCOTT-PC:/mnt/c/Users/scott/Documents$ echo $PATH
/usr/local/texlive/2020/bin/x86_64-linux:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/mnt/c/Windows/system32:...
Why is there a difference between these two paths? Is it possible to change the first PATH variable?
To be honest, when I first looked at this question, I thought it would be an easy answer. Oh how wrong I was. There are a lot of nuances to how this works.
Let's start with the fairly "easy" part, though. The main difference between the first method and the second:
wsl by itself launches into a login (and interactive) shell
the shell launched with wsl echo $PATH is neither a login shell nor an interactive shell
So the first will source both login scripts (e.g. ~/.profile) and interactive startup scripts (e.g. ~/.bashrc). The second form does not get to source either of these.
You can see this a different way (and get to the solution) with the following commands:
wsl -e bash -c 'echo $PATH'
wsl -e bash -li -c 'echo $PATH'
The -li forces bash to run as a login and interactive shell, thus sourcing all of the applicable startup scripts. And, as #bovquier points out in the comments, a single quote is needed here to prevent PowerShell from interpolating the $ before it gets to Bash. That, or escape it.
You should be able to run TeX Live the same way, just replacing the "echo $PATH" with the startup command you need for TeX Live.
A second option would be to create a script that both adds the path and runs the command, and just launch that script through wsl /path/to/script.sh
That said, I honestly don't think that your current login/interactive PATH is coming from /etc/environment. In my testing, at least, /etc/environment has no use in WSL, and that's to be expected. /etc/environment is only sourced by PAM modules, and with no login check performed by WSL, there's no reason to invoke PAM in either the wsl nor the wsl echo $PATH commands.
I'd expect that you still have the PATH setting in ~/.bashrc or somewhere similar), and that's where the shell is picking it up from at the moment.
While this isn't necessarily critical to understanding the answer, you might also wonder, if /etc/environment isn't used for setting the default (non-login, non-interactive) path in WSL, what is? The answer seems to be that it is hard-coded into the init that starts up WSL. That init is also what appends the Windows path (assuming you don't have that feature disabled in /etc/wsl.conf).
Hi so I am trying to modify my .cshrc file to make bash my default. It is on a school account so I cannot change the main settings but can change the profile. The problem is that when I use the command:
bash
in my .cshrc it works when I am logging in just fine. But anytime I try to scp files it does not work because it launches the .cshrc and scp gets confused when it changes to the bash terminal.
Does anyone know how to get around this? Possibly launch bash in quiet mode...
In general, you shouldn't do anything that invokes an interactive application or produces visible output in your .cshrc. The problem is that .cshrc is sourced for non-interactive shells. And since your default shell is csh, you're going to have csh invoked non-interactively in a lot of cases -- as you've seen with scp.
Instead, I'd just invoke bash -- or, better, bash -l -- manually from the csh prompt. You can set up an alias like, say, alias b bash -l.
If you're going to invoke a new shell automatically on login (which is still not a good idea), put it in your .login, not your .cshrc.
This is assuming chsh doesn't work, but it should -- try it.
I'm using rvmrc with the following text:
rvm_path=/local/rvm
(on Ubuntu 11.10) but trying to install gives an obscure error:
$ bash < <(curl -s https://rvm.beginrescueend.com/install/rvm)
Successfully checked out branch ''
Current branch master is up to date.
Successfully pulled (rebased) from origin
: No such file or directory
Any ideas?
You have no need at all to set $rvm_path. You're using a multi-user install. Please follow the explicit instructions for the Multi-User install at https://rvm.io and remove any existing installations, remove /etc/rvmrc, /etc/profile.d/rvm.sh, and $HOME/.rvmrc. Comment out any RVM sourcing lines in your .bash_profile, and .bashrc and log out of the machine then back in. Then reinstall correctly. Setting the rvm_path has never been a requirement of the installer UNLESS you already have a Multi-User working installation in place, and you want to attempt to use a per-user install with it. THEN you would preset the $rvm_path to $HOME/.rvm in your own $HOME/.rvmrc, log out then back in and then attempt the install again. BUT, that is not a supported installation type. Which is why 99.999% of users will not need to set rvm_path at all.
The real problem was that the git configuration for auto-converting line endings was not set correctly which prevented any installation from working. It had nothing to do with using rvmrc settings.
The fix for this is simple (and comes straight from the github help page):
$ git config --global core.autocrlf input
Line endings are important in linux and by forgetting that setting, everything the rvm-install script was pulling from github had \r\n endings. I made that change so long ago on my work machine, I didn't even remember it -- but it was not set on my home system.
I'll leave it up in case someone else has the same problem.