I got the following error while executing a PDI job.
I do have mysql driver in place (libext/JDBC). Can some one say, what would be the reason of failure?
Despite the error while connecting to DB, my DB is up and I can access it by command prompt.
Error occured while trying to connect to the database
Error connecting to database: (using class org.gjt.mm.mysql.Driver)
Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
ERROR 03-08 11:05:10,595 - stepname- Error initializing step [Update]
ERROR 03-08 11:05:10,595 - stepname - Step [Update.0] failed to initialize!
INFO 03-08 11:05:10,595 - stepname - Finished reading query, closing connection.
ERROR 03-08 11:05:10,596 - stepname - Unable to prepare for execution of the transformation
ERROR 03-08 11:05:10,596 - stepname - org.pentaho.di.core.exception.KettleException:
We failed to initialize at least one step. Execution can not begin!
Thanks
Is this a long running query by any chance? Or; in PDI world it can be because your step kicks off at the start of the transform, waits for something to do, and if nothing comes along by the net write timeout then you'll see this error.
If so your problem is caused by a timeout that MySQL uses and frequently needs increasing from the default which is 10 mins.
See here:
http://wiki.pentaho.com/display/EAI/MySQL
Related
Hello everyone and thanks for reading this problem.
I have a solution in C# using the zkemkeeper dll to get the records from some access control devices. When I "ping" them, there isn't any problem, but when I try to connect to them (Using my solution or the standalone demo to get attendance) I get the "-307" error with the "Unable to connect message". That's not very clear and I would really aprecciate if someone can explain what this error is (please!!!!). I would really like to understand these errors myself, so, where can I find all the definition of these errors?
In short:
1.- What is the problem regarding the "-307" error?
2.- Is there any place where all these errors are documented?
Thanks in advance!!
enter image description here
maybe you should check your device, you can ping them
Attention
The dwErrorCode parameter specifies the error code. The values are described as follows:
During connection, the following error codes may be returned:
0 Connected successfully
-1 Failed to invoke the interface
-2 Failed to initialize
-3 Failed to initialize parameters
-5 Data mode read error
-6 Wrong password
-7 Reply error
-8 Receive timeout
-307 Connection timeout
In invoking other interfaces, the following error codes may be returned:
-201 Device is busy
-199 New Mode
-103 device send back error of face version error
-102 face template version error, like 8.0 face template send to 7.0 device
-101 malloc memory failed
-100 Not supported or the data does not exist
-10 The length of transmitted data is incorrect
-5 Data already exists
-4 Insufficient space
-3 Wrong size
-2 File read/write error
-1 The SDK is not initialized and needs to be reconnected
0 Data not found or duplicate data
1 Correct operation
4 Parameter error
101 Buffer allocation error
102 repeat invoking
Underlying error codes:
-12001 Socket creation timeout (connection timeout)
-12002 Insufficient memory
-12003 Wrong Socket version
-12004 Not TCP protocol
-12005 Waiting timeout
-12006 Data transmission timeout
-12007 Data reading timeout
-12008 Failed to read Socket
-13009 Waiting event error
-13010 Exceeded retry attempts
-13011 Wrong reply ID
-13012 Checksum error
-13013 Waiting event timeout
-13014 DIRTY_DATA
-13015 Buffer size too small
-13016 Wrong data length
-13017 Invalid data read1
-13018 Invalid data read2
-13019 Invalid data read3
-13020 Data loss
-13021 Memory initialization error
-15001 Invoking return value of status key issued by SetShortkey interface repeatedly
-15002 Invoking return value of description issued by SetShortkey interface repeatedly
-15003 The two level menu is not opened in the device, and the data need not be issued
getdevicedata and setdevicedata invocation error codes
-15100 Error occurs in obtaining table structure
-15101 The condition field does not exist in the table structure
-15102 Inconsistency in the total number of fields
-15103 Inconsistency in sorting fields
-15104 Memory allocation error
-15105 Data parsing error
-15106 Data overflow as the transmitted data exceeds 4M
-15108 Invalid options
-15113 Data parsing error: table ID not found
-15114 A data exception is returned as the number of fields is smaller than or equal to 0
-15115 A data exception is returned as the total number of table fields is inconsistent with the
total number of fields of the data
Firmware error codes:
2000 Return OK to execute
-2001 Return Fail to execute command
-2002 Return Data
-2003 Regstered event occorred
-2004 Return REPEAT Command
-2005 Return UNAUTH Command
0xffff Return Unknown Command
-4999 Device parameter read error
-4998 Device parameter write error
-4997 The length of the data sent by the software to the device is incorrect
228
229
-4996 A parameter error exists in the data sent by the software to the device
-4995 Failed to add data to the database
-4994 Failed to update the database
-4993 Failed to read data from the database
-4992 Failed to delete data in the database
-4991 Data not found in the database
-4990 The data amount in the database reaches the limit
-4989 Failed to allocate memory to a session
-4988 Insufficient space in the memory allocated to a session
-4987 The memory allocated to a session overflows
-4986 File does not exist
-4985 File read failure
-4984 File write failure
-4983 Failed to calculate the hash value
-4982 Failed to allocate memory
Note
This interface is applicable to the new architecture firmware.
More info from stms :
Short Text
SQL error "SQL code: -10108" occurred while accessing table "CDHDR".
What happened?
Database error text: "SQL message: Session has been reconnected."
Return value of the database layer: "SQL dbsl rc: 99"
The problem is that client is running this code through the job in which I am not available to debug it. All I know is that it is working for other countries selected but for some specific it is not so the question is :
Was it a temporary connection error between two servers or is it data overload issue due to SELECT statement?
At the moment I am not really sure which thing I have to look on the system, the same program once produced the error for exceeding the limit in the db query ( > 10 minutes) so this might be related to system configuration or what?
Thanks in advance
I am having some trouble running a simple tHiveCreateTable job in Talend OS for Big Data (Print of the job where I am getting this error).
The Hive connection is fine and the job worked until Ranger was activated in the cluster.
After ranger, I started getting the following log:
[statistics] connecting to socket on port 3345
[statistics] connected
Error while processing statement: Cannot modify mapred.job.name at runtime. It is not in list of params that are allowed to be modified at runtime
[statistics] disconnected
This error occurs either using Tez or MapReduce for the job, throwing an exception in the following line of the automatically generated code:
// For MapReduce Mode
stmt_tHiveCreateTable_1.execute("set mapred.job.name=" + queryIdentifier);
Do you know any solution or workarround for this?
Thanks in advance
It is possible to disable changing mapreduce.job.name and hive.query.name at runtime by Talend7 jobs.
Edit the file
{talend_install_dir}/plugins/org.talend.designer.components.localprovider_7.1.1.20181026_1147/components/templates/Hive/SetQueryName.javajet
and comment out lines 6 and 11 like that:
// stmt_<%=cid %>.execute("set mapred.job.name=" + queryIdentifier_<%=cid %>);
// stmt_<%=cid %>.execute("set hive.query.name=" + queryIdentifier_<%=cid %>);
It solved this issue for me.
sometimes i have this error when i try to connect to my database in B1if :
vBIU.errhdlg='' exceptionmsg='com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception:
com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: Connect to
Business One failed. (-119) Database server type not supported -b1Server=SRV-B1-HYPPROD,
company=SBO_HYPFR_PROD, licenseServer=HYP-B1-LIC:30000, dbType=7, dbUser=sa, userName=B1i-' msglogexcl='false'
handover2CentralSrv='' MessageLog='true' msglogdbop='insert'>
the question is how to fix that ?
The Error happens when B1i don't get a connection to the DB. That should not be a problem because B1i repeats the process after a minuten and then the connection should be there.
We fixed this by Installing the 64 Bit version of B1DIAPI.x64. Not sure why that worked.
Note you need to update the SLD links for your database and SBO-COMMON - the jcoPath will likely be different - replace the "Program Files (x86)" with just "Program Files".
crosspost: https://orchard.codeplex.com/discussions/473454
I want to start by saying I'm currently migrating from Orchard CMS 1.6 to 1.7.2. So it used to work in 1.6 but I'm now having issues with 1.7.2.
2 of my Content Types are having issues when creating items, they never finish saving and when I check the logs I get this:
Orchard.Alias.Implementation.Updater.AliasHolderUpdater - Exception during Alias refresh
NHibernate.Exceptions.GenericADOException: could not execute query
[ select aliasrecor0_.Id as Id1829_, aliasrecor0_.Path as Path1829_, aliasrecor0_.RouteValues as RouteVal3_1829_, aliasrecor0_.Source as Source1829_, aliasrecor0_.Action_id as Action5_1829_ from Orchard_Alias_AliasRecord aliasrecor0_ where aliasrecor0_.Id>#p0 order by aliasrecor0_.Id asc ]
Name:p1 - Value:48
[SQL: select aliasrecor0_.Id as Id1829_, aliasrecor0_.Path as Path1829_, aliasrecor0_.RouteValues as RouteVal3_1829_, aliasrecor0_.Source as Source1829_, aliasrecor0_.Action_id as Action5_1829_ from Orchard_Alias_AliasRecord aliasrecor0_ where aliasrecor0_.Id>#p0 order by aliasrecor0_.Id asc] ---> System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. ---> System.ComponentModel.Win32Exception: The wait operation timed out
When I stop it and view the site (anywhere really), it's entirely wrecked with this error:
Exception Details: System.ComponentModel.Win32Exception: The wait operation timed out
[Win32Exception (0x80004005): The wait operation timed out]
[SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.]
Line 162: return criteria
Line 163: .List<ContentItemVersionRecord>()
Line 164: .Select(x => ContentManager.Get(x.ContentItemRecord.Id, _versionOptions != null && _versionOptions.IsDraftRequired ? _versionOptions : VersionOptions.VersionRecord(x.Id)))
Source File: d:\Projects\Office Ignite\Main-1.7\src\Orchard\ContentManagement\DefaultContentQuery.cs Line: 162
I don't know why this is isolated with those two CTs. They don't have parts with custom tables or anything.
Any piece of information would be highly appreciated. Thanks!
I have same error, but it seems that problem is not related directly for my code.
I found two solutions for now:
1.) Taxonomy corruption problem https://orchard.codeplex.com/workitem/20411
2.) Static is dirty and lock which is default in select statment is heavly used https://serverfault.com/questions/419997/the-wait-operation-timed-out-when-running-sql-server-in-hyper-v