I'm kind of new to Visual Studio. I've built a few simple programs in it, but now I'm in the process of rewriting a huge system I wrote in VBA. What is frustrating me is the Error List in VS is only listing errors for one .vb File in my project, lets call that VBFile1. Now, when I work on another vb File, VBFile2, which is in the same project as VBFile1 no red squiggles or errors are listed for VBFile2. I don't understand how this could happen. This is what I've tried/checked:
Filter is set to 'Current Project' and I played around with the other Filter settings but no change.
Checked the Text Editor under Options and according to the research that I've already done it is fine. Plus, I have never changed any of these settings anyway.
Closed and re-opened Visual Studio.
Closed all open files in the Project and still displays the same error list
Close all files except the VBFile2 but still shows the same error list of VBFile1.
I have Visual Studio 2012 Ultimate. I feel like this should be an easy fix...I just am really confused what's going on.
Hope this makes sense!
UPDATE: Excluded from project, VBFile1 and finally errors are listed for VBFile2...why would this be?
I am not sure if it has been fixed in Visual Studio 2012, but there is a Connect Request for Visual Studio 2010 with a resolution of won't fix because of performance issues. The effect your are seeing is because you have exceeded the maximum number of errors for that project (what I am used to seeing is 102 as the threshold), it will not show you anymore till you fix the ones that it has already shown you.
According to this MSDN article, which I found through this SO question the limitation is still there for the IDE but has been removed for the command line compiler.
From above MSDN Link:
Limitless (Command-line) Errors!
This is actually a good thing, let me explain. For performance reasons, the Visual Basic IDE maxes out at 101 errors (with error #102 being “Maximum number of errors exceeded.”) This can make it difficult to estimate the amount of work remaining in certain situations, particularly in upgrade scenarios. We have removed this limit from the command-line compiler in this release, though it still there in the IDE. What this means is if you want to know exactly how many errors there are for a project, just invoke the compiler through msbuild.exe or vbc.exe and you’ll get your answer.
Related
I made some changes to a VB.Net website project in Visual Studio 2019, and then I merged them into the UAT project in TFS, so that they can be published to our UAT site. When I try to build the project the Error List contains one item stating:
Maximum number of errors has been exceeded.
When I look at the Output tab I can see a long list of errors, but when I investigate them they are not errors at all. Some of the messages indicate syntax errors, but when I view the code nothing is highlighted and it all looks fine. Some of them say that a variable has not been declared, but it has. I also get Character is not valid errors - but again nothing is highlighted.
I should say that none of these errors is in any of the files I have been working on so they should be the same as the code which works fine on the UAT site. I already tried deleting the .vs folder and removing related folders from the Temporary ASP.Net Files folder, which fixed some issues I was having earlier, but not these errors.
I don't want to rant, but I feel like if Microsoft had a better testing regime there would be less of these sorts of issues and developers wouldn't need to waste so much time trying to work around their mistakes. I'm completely stuck at the moment so any suggestions would be gratefully received.
I wish I could say I know how to fix this but I don't. All I know is after a mixture of visual studio restarts, failed publishes, and a couple of fixed references the project now compiles and even publishes.
That would've been a lot easier and less stressful if visual studio provided more accurate error messages
New to VisualStudio 2015, but not to programming. Have searched both Google and here for a lead on this, but considering the available search terms, I might not immediately uncover them.
I was looking into porting an old VB6 (200k+ LoC) to VB.Net in VS2015. Mostly just poking around to determine viability. Using a project converter, and have resolved most of the initial errors, and am familiar with how the Error List works.
However, it is throwing a new one at me. It now only has two lines of error, both showing the same thing. They both say:
" & ErrorName
That's a Quote, Ampersand, and ErrorName. That's all that show up on the error list line. No file. No line number. Double click on them does nothing.
I thought perhaps the project was corrupted, so I completely re-created it, adding all the modules, forms, classes, etc again, and it found a lot more errors to fix, which I fixed, and now these two lines show up again.
Does anyone have any indication where this is coming from, or, better yet, how to fix?
I've seen VB programmers report this misbehavior before, never with a good lead to explain the problem. It is specific to VS2015, the Roslyn integration caused many issues. In general a very buggy release, be sure to apply all available Updates, currently up to Update 3. If you have a license that includes an MSDN subscription then I recommend you install VS2012, the last "good" version of VS that was not yet affected by Microsoft's new focus on agile development.
I think the underlying issue is caused by the IDE simply not parsing the compiler error message correctly. Probably having to do with the statement with the error getting quoted in the message. Getting only part of the statement text and it fumbling quotes is a pretty good hint that this is where it went wrong.
So look at the actual output of the compiler, decent odds you'll now see the full error text. Use Tools > Options > Project and Solutions > Build and Run. Change the "MSBuild output build output verbosity" setting to Normal. After the failed build, use View > Output to see the compiler output. You'll probably have a lot of messages, consider copy/pasting the content.
Recently I noticed in my current vb.net project that sometimes (depending on the value), if I enter a double value the editor changes my input, for example:
When I type ...
Dim x As Double = 0.6
...after commiting the line by pressing Enter it becomes:
Dim x As Double = 0.59999999999999998
If I directly undo the action, then it gets reverted back to the original value I typed in. Any future edit in that line will again produce the undesired results.
I'm aware that internally 0.6 is calculated as 0.59999999999999998 so it doesn't make a difference for the running application, but it's very annoying and the strange thing is: this hasn't always happened and, if I create a new project, it doesn't happen there either.
So my questions are: How can I prevent VS from doing this? Why does it happen at all? Why isn't it always like this (previously in my current project or in a new one)?
I'm running 64bit-Windows 8.1 on an Intel CPU - if that has anything to do with it.
Has anyone got any ideas?
EDIT: I'm using Visual Studio 2013 Professional (12.0.31101.00 Update 4) and, yes, the project has been migrated from several earlier VS versions. There are no relevant Add-Ins or extensions installed. Disabling "Pretty Listing" does indeed prevent the problem, but of course then the other highly useful aspects of the option are disabled as well :o(
EDIT2: After the tip leading to "Pretty Listing" I found the following SO article, but there also no solution was found: Visual Studio VB pretty listing settings
Several years ago I had a project where this was happening. As you wrote, the reason for the number is that some numbers can't be represented exactly in a binary floating point variable. More on this here.
My project had been upgraded through several versions of Visual Studio. It was also shared with developers using VS Express.
If I ran into this problem again today I would open and check the project-file manually, or just simply create a new project and re-add the files if I could not quickly locate the problem and the project was small enough.
If you have upgraded the project through multiple versions of Visual Studio like I had, it might be dragging some settings along that are no longer visible in the projects options dialog.
Just as an interesting experiment you could also try to turn off Visual Studio's Pretty Listings to see if that is what is actually changing your code.
Having a very odd issue with Visual Studio 2013, curious if anyone else is seeing anything similar. I have VS 2013 Ultimate, it seems like once a day, while I'm working with a file, the compiler just suddenly freaks out and doesn't detect my code anymore in my web forms. Take a look at the screenshot below (I just chose a random spot in the middle of the web form), but out of nowhere, VS starts erroring, telling me that variables aren't declared, that method arguments need parenthesis on lines of code that aren't methods, all sorts of whacky stuff.
I assure you, I don't have any broken references, I didn't forget to close an if statement.. nothing like that. All I'm doing it writing some code, and randomly the whole page just starts to error like this. To resolve, all I can do is copy the code contents, delete the page, recreate the page, and paste the contents back into my "new" file... same exact code, only no errors. I wouldn't even worry about doing this if I wasn't doing this at least once a day.
Any help is appreciated, thanks!
Edit: For what it's worth, I found a slightly easier workaround for this issue. If I edit the properties of the class file to "Do not Compile" and then back to "Compile", the IDE is able to read the file just fine...
It looks like this is simply a bug in the Vb.Net Compiler / IDE. I agree it's unlikely to be a bug in your code because you can see that the error squiggles don't line up with places that would represent the errors you are reporting. This is sometimes a sign of an IDE bug
In terms of fixing the problem though you can probably get them to go away by closing and reopening the solution in question. Baring that restarting Visual Studio. I wouldn't resort to deleted / recreating the page.
Long term though you may want to file an issue on connect so the IDE team can try and fix the problem.
http://connect.microsoft.com/VisualStudio
I'm seeing a strange build bug a lot. Sometimes after typing some code we receive the following build error.
Class 'clsX' must implement 'Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs)' for interface System.ComponentModel.INotifyPropertyChanged'.
And
'PropertyChanged' cannot implement 'PropertyChanged' because there is no matching event on interface 'System.ComponentModel.INotifyPropertyChanged'.
Those error should never go together! Usually we can just ignore the exception and build the solution but often enough this bug stops our build. (this happens a lot using Edit and Continue which is annoying)
We're using Vb.net and c# mixed in one big solution.
Removing the PropertyChanged event and retyping the same code! sometimes fixes this.
Question:
Has anyone else seen this problem and has some suggestions how to prevent his?
We're using a code generator that causes this error to surface but just editing some files manually triggers this exception too. This error occur's on multiple machines using various setups.
Someone had the same exact issue discussed here. It sounds like there is an issue with this build picking up an old version of a binary. I would try the following in order:
Verify all assembly references use project references where possible within the Visual Studio solution.
Disable build parallelization in case there is some weird file locking issue with concurrent project builds. Go to Tools -> Options, Projects and Solutions -> Build and Run, then set "maximum number of parrellel project builds" to 1. Not the best solution but it may help narrow down the problem.
Disable the Hosting Process in case it's locking some file causing an assembly to not get rebuilt correctly. For C# project go to Project Properties, Debug tab, and uncheck "Enable the Visual Studio hosting process". For VB.NET project you'll need to Unload Project, Edit the project file, and add <UseVSHostingProcess>false</UseVSHostingProcess> to the PropertyGroup of each configuration. Again, not the best solution but you probably won't notice a difference.
Lastly, try doing a Clean + Build to try and resolve the issue when it occurs (I know this is not a fix but it's easy enough to do), also Rebuild may be slightly different than Clean + Build so try the latter if the former doesn't work.
As I can not comment due to lack of appropriate points.
But I would like to share one of my experience:
In an aspx.cs page I was working, used to compile fine and some time gave mysterious error of a variable not defined or function not defined or sometime variable or the function defined two times. I changed possibly each and every variable and function name but there seemed no effect , but after entering a simple space or a new line at any place in the file used to solve the compile error. At one time I tried to save the file (in a different encoding as i am used to experiments) and found that the file was not saving in the correct encoding (i.e. the ansi encoding because the file had a unicode character ), I removed the unicode character and that compile error didn't bothered me again.
This unicode character problem could be (not a hard and fast rule) there so you could check it.
Nuke & restore using source control (TFS instructions here):
Make sure you have everything checked in
Exit Visual Studio
Rename the project directory to .Bak (effectively deleting it)
Reopen Visual Studio and in source control:
Get Specific Version
check 'Overwrite... not checked out' and 'Overwrite ... even if local version matches'
Re-open project
Another problem: Make sure some source files are not newer than the current date (or your date is set back). Often this happens in apps where you are doing logic that requires certain things to happen differently on certain dates. You change your clock to test it, make a revision to the source with the date advanced, set the date back, and viola, rebuild does not rebuild that file.
You say 'typing it in again' - can you try just saving? After 40 years since MULTIX the .net build still decides what has changed by checking the file timestamp.
good luck!
When you get the error, is it always on the VB calling C# side, or vice-versa, or does it work both ways?
If the answer is either of the first two situations, try building the "callee" project within the solution before building the "caller" project to see if it stops the situation.
Also, just in case it may jog something for you to think about, does this error crop up when you change a VB file or a C# file, or is there no correllation?
Oh, and sorry this looks like an answer instead of a comment, I cannot post comments yet (need 50 rep).