I'd like to count a text-string in every page on a report and print out the count of the strings in the page-footer.
Searching for a string in a text field is straight forward, counting the findings within the text-field too, but how is it possible to sum the findings in a integer variable per report-page when it has several entries?
i.e. I´ve got a report-page like this where each new line is a new record.
Here the first report-page:
aaaaaaF
aaaaaFF
ffaaaaaaaaa
FaaaaaFF
Now the page-footer:
There are 4 records. The letter "F" has been found 6 times on this report page.
Now the second report-page:
aaaFaaF
aaaaaF
fFaaaaaaaaa
FaaaFaFF
FFaaaaFa
page-footer:
There are 5 records. The letter "F" has been found 10 times on this report page.
I'd be happy if smdy has an advice for me.
Thanks!
First step is to figure out how many occurances of "f" occur in each record. Which you can do using
= Len([myField]) - Len(Replace([myField],"f",""))
Now for the total occurances in that page you use the Sum function in a text box in the report footer section.
= Sum( ... )
= Sum(Len([myField]) - Len(Replace([myField],"f",""))) ' if report based on a table
= Sum([myCalculatedField]) ' if you use the occurance count formula in the query instead
If you need to total across the page there is a link detailing how to go about it here (you'll have to scroll down a bit)
http://office.microsoft.com/en-us/access-help/summing-in-reports-HA001122444.aspx
You haven't shown any of the expressions that you are using but, essentially, in the Report Footer you would include a textbox which uses your aggregate function:
=COUNT([SomeField]) 'or
=SUM(iif(some condition, 1, 0))
where SomeField is a field in the detail section, or some condition refers to this field.
That is, you need to SUM (or COUNT) across the whole report by referring to field(s) in the details section. You do not do this by attempting to refer to the subtotals that you have in the page-footers - this won't work.
Related
enter image description hereI am trying to design a report in ssrs that returns the last opening stock for each product in the dataset. To achieve this I used
=Last(Fields!CustProdAdj_new_openingstockValue.Value).
This works fine. But where I encountered a problem is in getting the sum of all the opening stock for each product. I tried using
=sum(Last(Fields!CustProdAdj_new_openingstockValue.Value))
but I got the error message
[Error on Preview]
Please is there another way to go about this
I have tried using aggregate(), runningValue(), to no avail
This is the dataset
This is the report layout
On previewing having used max()
This is probably easier to do directly in the dataset query but assuming you cannot change that, then this should work...
This assumes your data is ordered by the CustProdAdj_createdon column and that this is a date, datetime or some other ordered value, change this bit if required.
=SUM(
IIF(Fields!CustProdAdj_createdon.Value = Max(Fields!CustProdAdj_createdon.Value, "MyRowGroupNameHere"),
CustProdAdj_new_openingstockValue,
0)
)
Change the MyRowGroupNameHere to be the name of the rowgroup spelled exactly as it is in the rowgroup panel below the main design panel. Case sensitive and include quotes.
What this does is, for each row within the rowgroup "MyRowGroupNameHere", compare the CustProdAdj_createdon date to the max CustProdAdj_createdon across the rowgroup. . If it is the same then return the CustProdAdj_new_openingstockValue else return 0.
This will return the value required on only 1 record within the group.
For example, if you had 1 row per day then only on the last day of the month would a value be returned other than 0 because only the date of the last record would match the maximum date within the group.
Then it simply sums the results of this up.
I'm using Google sheets, and I want to get the data from one sheet to another where I want only the columns with count > 1.
Let's say we have 3 columns A, B, and C. I tried the following (the first sheet name is "Form Responses 1"):
I thought about using a query in the second sheet as: =query('Form Responses 1'!A1:Z, "Select A having count (A) >1 union select B having count (B) >1 union select C having count (C) > 1"). But I got a parse error where it seems that union and having are not supported in google sheets query.
How can I achieve this (whether it's using query or any other Google sheets function that can work)?
More details:
The first sheet contains info about exercises conducted during a lecture and it gets its data from a Google Form (so the responses are fed in this sheet). Here is a screenshot of it:
Please note that the form is divided into sections. When the user selects the course, the attendance, the participation, and adds a comment, then they go to the next section, the next section will be based on the selected course, the newly opened section will have the exercise name and rating questions (the exercise name is a dropdown list with items that are prefilled and specific to the selected course). That's why, you can see that "exercise name" and "rate the exercise" columns are repeated because we have 2 sections in this form.
The second sheet should contain the data of a selected course only (either mobile dev or web dev) which can be achieved easily through a query with a where clause. But, in addition to that, it shouldn't contain the empty columns of "exercise name" and "rate the exercise" as they correspond to another section. So, it should have only one exercise name column and one rating column that correspond to the selected course. Here is a screenshot if we only use a query with where clause without removing the extra name and rating columns:
Here is a screenshot with the desired result:
Thanks.
why not use just:
=QUERY('Form Responses 1'!A1:Z, "select A,B,C,D,E,F,G where F is not null", 1)
Use "OR" condition
Eg:-
QUERY(Data!A:R,"select A, N, P where N>0 or P>0")
where A column has country and N, P columns have population values
Please look at the image below, my dataset has two processes, 'logs processed' and 'stacked at kilns'.
I need to take the total 'stacked at kilns' and divide it by the total 'logs processed' for each length.
so for example for field name 5.4 (dataset field length), I would like to divide 2784/2283 to return a percentage of the recovery.
my expressions currently is
=Sum(IIf(
(Fields!process.Value = "Logs Processed") AND (Fields!Length.Value=Fields!Length.Value)
, Fields!cubes.Value
, Nothing)
, "Wetmill_to_Kiln")
But this returns the value of all lengths where process is 'Logs Processed' not for just length 5.4 as per example.
So each length field is dynamically created (3.3,3.6,3.9 .... 6,6.3,6.6)
I would like to get the total for 'stacked at kiln'/'logs processed' for each length field.
any help appreciated as always
example of my desired output in bottom image.
current output:
Desired output:
*****UPDATE AS PER TPHE*********
I have created a text box inside the column group. this returns the value for that group but how can I reference the value of that text box.
if I use something like ReportItems!tbxSource.Value how can I reference the value of the textbox when the it is dynamically created across the column group? there are then mulitple instances of that textbox name?
with reference to the picture how do get the value of the white <> from the textbox with green <>
Thanks,
Since you are using a column group, you can put your expression into a text box within the group and it will execute on only the data that is captured within each column. So if your code for the Logs processed row is something like Sum(Logs) and your code for the Stacked at Kiln row is something like Sum(Stacked), your expression code for the recovery row would be Sum(Stacked)/Sum(Logs). The key is to make sure that it is within the column group.
So what I got to work was to create two variables on the column group. one called kilntotal and one called logtotal. the variables value was equal to the result of this expression:
=sum(iif(Fields!process.Value="logs",cdbl(Fields!cubes.Value),cdbl(`0)))`
and
=sum(iif(Fields!process.Value="kiln",cdbl(Fields!cubes.Value),cdbl(0)))
I then use these variable in my logic in my recovery % row:
=Variables!kilntotal.Value/Variables!logtotal.Value
Thanks for the input and your time.
My ssrs has three row groups nested, and in one of the rows the report runs many times.
I'd like to add something simple to the rows, such as "%" at the end, but only on the first row returned, not the rest of the dynamic rows. My idea was to use:
=RowNumber("detailsGroup") but all that returns is one for each row. Is there another SSRS method?
I was also thinking of using the "is" operator and comparing the dynamic values to the First operator, but running the report gave #ERROR.
If you are using groups you should be able to use Previous() function.
EXample:
Group 1 - ClientName
Group 2 - Region
Group 3 - SubRegion
Detail - data for above 3 groups
If I just want to add something in one of the detail data then I would use ..
=Fields!CallReason.Value + IIF(Previous(Fields!ClientName.Value) <> Fields!ClientName.Value , " Add Text For First Line", "")
I inherited an SQL Reporting Services .rdl project from somebody and need help fixing some functionality.
In each row of the report, there is a subreport. In order to save space the subreport is divided into 3. Such that in each row of the report, it splits the data of the subreport into 3 smaller tables. Right now, it fills these 3 subreports horizontally. (ie. if the result has 9 values, the first subtable will have 1, 4 & 7, the second subtable will have 2, 5 & 8, etc)
Is there a way to have it fill the subtables vertically? (ie. the first subtable would have 1,2 & 3)
Thanks!
By default, the multi-column reports should fill vertically. In fact, there isnt even an option to fill horizontally so i'd like to know how it is being done. Perhaps the underlying query has been modified?
In fact, I took a deeper look into the query and it turns out that the column number is being passed as a report parameter and the results are being reordered using a modulo on the column number. I don't have it with me right now, so I don't have the exact syntax.
More info for anyone trying to do this:
it turns out that the subreport query gerates a column which indicates the row number
ROW_NUMBER() OVER (PARTITION BY columnName ORDER BY otherColumn) AS RowNumber
Then in the report, the subreport is included 3 times. Each subreport has a report parameter called Column, the first one is of value 1, the second 2 and the last one 0. The subreport then has a filter on it
=RowNumber Mod 3 = Column
that way the subreport results are divided into 3 supreports that can all be placed on the same row to save space.