I copied the following code in my oulook VBE, from one of the VBA communities and amended it as per my need.
I can run it using F5 and F8. Now I would like to run this macro whenever I receive an email in folder1.
I tried setting up a rule but I cannot see the macro listed in the 'run a script' selection box.
I have already checked that
macro security setting are correct
macro is in a module not in a class
can you please tell me what is going wrong in the setting.
Public Sub SaveAttachments()
Dim myOlapp As Outlook.Application
Dim myNameSpace As Outlook.NameSpace
Dim myFolder As Outlook.MAPIFolder
Dim yourFolder As Outlook.MAPIFolder
Dim myItem As Outlook.MailItem
Dim myAttachment As Outlook.Attachment
Dim I As Long
Set myOlapp = CreateObject("Outlook.Application")
Set myNameSpace = myOlapp.GetNamespace("MAPI")
Set myFolder = myNameSpace.GetDefaultFolder(olFolderInbox)
Set yourFolder = myNameSpace.GetDefaultFolder(olFolderInbox)
Set myFolder = myFolder.Folders("folder1")
Set yourFolder = yourFolder.Folders("folder2")
For Each myItem In myFolder.Items
If myItem.Attachments.Count <> 0 Then
For Each myAttachment In myItem.Attachments
I = I + 1
myAttachment.SaveAsFile "C:\arthur\test.csv"
Next
End If
myItem.Move yourFolder
Next
End Sub
To be recognized as proper script macro for the Rule Wizard, the macro has to have the expected parameter:
Sub myRuleMacro(item as Outlook.MailItem)
MSDN article (still valid for Outlook 2007/2010/2013/2016)
Related article
Article about enabling run-a-script rules otherwise disabled due to security reasons
(registry key EnableUnsafeClientMailRules).
I had the same issue today on a similar script after Office was upgraded to Version 1803 (Build 9126.2282). Removing the "Pubic" keyword from the sub did the trick. Not sure why, since has been working the other way for years.
I also had to re-add the reg key that had disappeared - EnableUnsafeClientMailRules.
Related
I've had an Outlook 2016 VBA macro running for a year to check emails arriving in my inbox. Today, following installation of Windows 10 updates, I get a type mismatch error when this macro runs. The error line is the Set olNs = Application.GetNamespace("MAPI") line below:
Private Sub Application_Startup()
Dim olNs As Outlook.NameSpace
Dim Inbox As Outlook.MAPIFolder
Dim olRecip As Recipient
Dim dt As String
Dim strFile_Path As String
dt = Format(CStr(Now), "yyyy_mmm_dd_hh_mm")
strFile_Path = "d:\temp\parking.log"
Open strFile_Path For Append As #1
Write #1, dt & " " & "Application_Startup() triggered"
Close #1
Set olNs = Application.GetNamespace("MAPI")
Set olRecip = olNs.CreateRecipient("me#gmail.com")
Set Inbox = olNs.Folders("me#gmail.com").Folders("Inbox")
Set Items = Inbox.Items
End Sub
Any idea how I can fix this?
First of all, you need to make sure the COM references are set correctly.
You may try to run the code without setting a local variable:
Private Sub Application_Startup()
MsgBox "Welcome, " & Application.GetNamespace("MAPI").CurrentUser
Application.ActiveExplorer.WindowState = olMaximized
End Sub
I just ran into this issue (COM add-ins were fine) and as stated, removing the explicit declaration seems to fix the issue (you can also Dim the Namespace as an Object instead of Outlook.Namespace).
As a quick reference for anyone else I used the following code to bypass the issue:
With Application.GetNamespace("MAPI")
Dim Inbox As Outlook.MAPIFolder: Set Inbox = .GetDefaultFolder(olFolderInbox)
Dim Junk As Outlook.MAPIFolder: Set Junk = .GetDefaultFolder(olFolderJunk)
End With
I have some VBA code in Outlook which behaves perfectly for the main Mailbox - however the same code is struggling when I add a secondary mailbox - this is Outlook 2016.
It seems to be struggling with reading the sub folders - I can get it to read mail items in the Inbox, but not the sub folders.
Code :
Dim sharedemail As Outlook.Recipient
Dim myOlApp As New Outlook.Application
Dim myNameSpace As Outlook.NameSpace
Dim myInbox As Outlook.MAPIFolder
Dim myDestFolder Outlook.MAPIFolder
Dim strSubject As String
Dim i As Integer
Set myNameSpace = myOlApp.GetNamespace("MAPI")
Set sharedemail = myNameSpace.CreateRecipient("recip#domain.com")
Set myInbox = myNameSpace.GetSharedDefaultFolder(sharedemail, olFolderInbox)
For itemCount = myInbox.items.Count To 1 Step -1 'Iterates from the end backwards
Set item = myInbox.items(itemCount)
strSubject = UCase(item.Subject)
Select Case True
Case InStr(strSubject, UCase("Holiday Request")) > 0
'Set destination folder
Set myDestFolder = myInbox.Folders("HolidayRequests")
'move the email out of inbox
item.Move myDestFolder
End Select
Next
It stalls at the Set myDestFolder line as it can't seem to select that sub folder - as I say same code seems to work fine in main Inbox?
Thanks
Keep in mind that Outlook keeps shared default folders in the primary OST file, and it does not sync the subfolders.
You can either
Uncheck the "Download shared folders" checkbox
Use Extended MAPI (C++ or Delphi) - that would be fairly complex as you'd need to retrieve the autodiscover XML for that mailbox and construct the store entry id appropriately.
use Redemption (I am its author) - its version of RDOSession.GetSharedDefaultFolder returns an online version of the folder (RDOFolder) with all its subfolders.
May I know what code should I put in the macro to be able immediately transfer the files from my inbox to another particular folder after I've seen it come in my inbox? I do not wish to automatically forward it to another folder, I want it happen once I've pressed a particular combination of keys. Help please? Am not well-adept with Visual Basic?
You don't need a macro to do this, it can be accomplished with rules.
I'm assuming Outlook 2013, but this will basically apply to most versions:
Go to Inbox > Rules > Create Rule > Advanced Options
Checkmark 'Where my name is in the To box' (or any other option you choose)
Click Next
Checkmark 'move it to a specified folder', and then click the blue url on the name 'specified folder', and choose the folder
Click Next
Choose any other rules you want, and click Next
Verify your rule setup, and click Finish
' http://msdn.microsoft.com/en-us/library/office/ff860683(v=office.15).aspx
Sub MoveMessageToTestFolder()
' Works on one selected item
Dim myNameSpace As Outlook.Namespace
Dim myInbox As Outlook.Folder
Dim myDestFolder As Outlook.Folder
Dim myItem As Object
Set myNameSpace = Application.GetNamespace("MAPI")
Set myInbox = myNameSpace.GetDefaultFolder(olFolderInbox)
' Add As many .Folders("SubfolderName") as needed
Set myDestFolder = myInbox.Folders("Test")
Set myItem = Application.ActiveExplorer.Selection.Item(1)
If TypeOf myItem Is mailitem Then
myItem.Move myDestFolder
End If
Set myNameSpace = Nothing
Set myInbox = Nothing
Set myDestFolder = Nothing
Set myItem = Nothing
End Sub
http://www.slipstick.com/developer/how-to-use-outlooks-vba-editor/
http://www.howto-outlook.com/howto/macrobutton.htm
How do I automatically send out multiple (currently visible) draft items with VBA?
Please help, thank you.
Edit: It's a tough case, none of the items are in the drafts folder yet. These are generated emails that are on your screen, waiting to be sent.
Edit2: nvm, it's not going to help anyway. My script creates approximately 500 emails, and displaying the first 100 causes out of memory error. I opted to auto send them without displaying (it breaks the layout this way, but it's my only option for now.)
It just so happens that I ran into the same issue before and have code handy. If you're not already in Outlook, you will need to add a reference in the VBA IDE, Tools ---> References... and check the box next to "Microsoft Outlook 14.0 Object Library".
Dim oFolder As Folder
Dim oNS As NameSpace
Dim olMail As MailItem
If (MsgBox("Are you sure you want to send ALL EMAILS IN YOUR DRAFTS FOLDER?", vbYesNo + vbCritical, "WARNING: THIS WILL SEND ALL DRAFTS")) = vbYes Then
Set oNS = Outlook.Application.GetNamespace("MAPI")
Set oFolder = oNS.GetDefaultFolder(olFolderDrafts)
For i = 1 To oFolder.Items.Count
oFolder.Items(1).Send
Next
End If
Set oNS = Nothing
Here's some code. Replace Your Name in myFolders("Mailbox - Your Name") with your actual name as it appears in the mailbox.
Public Sub EmailOutlookDraftsMessages()
Dim lDraftItem As Long
Dim myOutlook As Outlook.Application
Dim myNameSpace As Outlook.NameSpace
Dim myFolders As Outlook.Folders
Dim myDraftsFolder As Outlook.MAPIFolder
'Send all items in the "Drafts" folder that have a "To" address filled in.
'Setup Outlook
Set myOutlook = Outlook.Application
Set myNameSpace = myOutlook.GetNamespace("MAPI")
Set myFolders = myNameSpace.Folders
'Set Draft Folder.
Set myDraftsFolder = myFolders("Mailbox - Your Name").Folders("Drafts")
'Loop through all Draft Items
For lDraftItem = myDraftsFolder.Items.Count To 1 Step -1
'Check for "To" address and only send if "To" is filled in.
If Len(Trim(myDraftsFolder.Items.Item(lDraftItem).To)) > 0 Then
'Send Item
myDraftsFolder.Items.Item(lDraftItem).Send
End If
Next lDraftItem
'Clean-up
Set myDraftsFolder = Nothing
Set myNameSpace = Nothing
Set myOutlook = Nothing
End Sub
Source Code adapted from this Question's answer.
Outlook wont let me send multiple drafts at the same time. Is there an easy way to send multiple drafts at once in outlook? without having to open each one individually?
From what i've read, seen and tried; this is not possible from within outlook itself, and thus a programming solution would be required, probably some VB script
ok, i found a bit of VB that does it:
`Public Sub SendDrafts()
Dim lDraftItem As Long
Dim myOutlook As Outlook.Application
Dim myNameSpace As Outlook.NameSpace
Dim myFolders As Outlook.Folders
Dim myDraftsFolder As Outlook.MAPIFolder
'Send all items in the "Drafts" folder that have a "To" address filled
'in.
'Setup Outlook
Set myOutlook = Outlook.Application
Set myNameSpace = myOutlook.GetNamespace("MAPI")
Set myFolders = myNameSpace.Folders
'Set Draft Folder. This will need modification based on where it's
'being run.
Set myDraftsFolder = myFolders("$MAILBOX").Folders("$DRAFTS")
'Loop through all Draft Items
For lDraftItem = myDraftsFolder.Items.Count To 1 Step -1
'Check for "To" address and only send if "To" is filled in.
If Len(Trim(myDraftsFolder.Items.Item(lDraftItem).To)) > 0 Then
'Send Item
myDraftsFolder.Items.Item(lDraftItem).Send
End If
Next lDraftItem
'Clean-up
Set myDraftsFolder = Nothing
Set myNameSpace = Nothing
Set myOutlook = Nothing
End Sub
just replace $MAILBOX with your mailbox name and $DRAFTS with the name of your drafts folder.
This has been personnaly tested and seems to work fine.
Not very different from author's answer, but still:
Sub SendDrafts()
Dim ns As NameSpace
Dim drafts As MAPIFolder
Dim Item As MailItem
Set ns = Application.GetNamespace("MAPI")
Set drafts = ns.GetDefaultFolder(olFolderDrafts) ' 16
For Each Item In drafts.Items
'Item.Send
Next
End Sub
Please be careful as it really sends all emails in your default draft folder. After uncommenting the send line. Dim lines to allow for autocompletion when inside Outlook macro editor.
A useful version, which I just tested in Outlook 2000:
Drag the emails you wish to send to the Outbox. They won't be sent automatically, but using this version of the prior posting sends them:
Sub SendOutbox()
Dim ns As NameSpace
Dim outbox As MAPIFolder
Dim Item As MailItem
Set ns = Application.GetNamespace("MAPI")
Set outbox = ns.GetDefaultFolder(olFolderOutbox) ' 16
For Each Item In outbox.Items
Item.Send
Next
End Sub
That way, you can be selective.
Yes, you can write a macro or add-in to do that.