IntelliJ IDEA closing unsaved tabs - ide

I know that I can mark unsaved files with asterisk if I check the corresponding check box in settings. But when I close the tab IDEA is not asking me "Do you want to save changes?". Tab is just closed and nothing in the project structure is not indicating that I have unsaved file. When I run the application it just saves the file and run the app.
Can I make IntelliJ IDEA to ask me that there is unsaved files in my project that I should now about before launching ?

You can't, at least not until this request is addressed.
Use Local History feature, see also this answer.

I've researched this and it appears that the designers of IntelliJ intentionally block this feature for the most bizarre of reasons, and have been doing so since at least 2012 on this ticket: https://youtrack.jetbrains.com/issue/IDEABKL-6460 . They refuse to even let you configure the editor to warn on closing unsaved files and give you the choice of saving it or discarding your edits.
Wow. I'm dumbfounded.
Sorry for the bad news...I had the same question and am thoroughly disappointed with their answer.

Related

Turn off Database Navigator suggestions that my sql is bad

I'm using this plugin for intelliJ
Database Navigator
I just wanted a simple tool to check my sqlite database, now that the firefox plugin I use is no longer working with the latest firefox update.
Sad!
Anyway, the plugin is good... except it seems to have added it's own "clever" sql checker, that finds all the sql in my java files, and then tells me if there are problems with the sql.
All well and good, but this
slows down editing those java files
doesn't work, finding phantom errors
isn't needed. Who struggles with writing sql?
So right now I have a bunch of red "tick" marks down the side of any java file with sql in it, as the plugin imagines up issues where there are none. I'd like these to just go away, I don't need code telling me if my code works - any ideas
how?
Here is an example of this thing:
I don't want the sql "string" to be treated as special, I don't want "analysis" performed on it, I can write working SQL.
Every time i load this class, the ... whatever it is takes up time looking at all the strings, and then makes EVERYTHING red on the sidebar. I don't want to disable all inspections on this page, as I do like to see when my java code has an error.
I know it is possible to tell intellij to stop looking at strings, I had this setting before - and then my laptop was stolen, thank you thieves - and now I have setup my environment again, I don't have my notes on how to resolve this issue.
The strings are "analyzed" when they are used in some methods of the package java.sql.
Click on a string and press Alt+Enter to expand the suggestion list
Select "Language Injection Settings" to open the configuration dialog for "SQL"
Uncheck all the checkboxes, press "OK" and all errors must be gone
Technical note: Settings are stored in <USER>/<.IDE_VERSION>/config/options/IntelliLang.xml

IntelliJ's IdeaVim plugin disables converting Java to Kotlin

I would like to use IntelliJ's feature, which converts Java code to Kotlin by simply copy-pasting from Java file to Kotlin file. It is working fine, but when I turn on IdeaVim plugin, it refuses to work anymore. I know Vim decently and I that's not the problem with my misunderstanding Vim edit modes. I am aware of How can I convert a part of Java source file to Kotlin? and answer by #yole saying that there is no other tool to do that.
But that answer was made over 3 months ago, and maybe some other tool appeared. So, my question is if someone found workaround to make IdeaVim plugin cooperate with Java to Kotlin conversion. I've already made a ticket on YouTrack: https://youtrack.jetbrains.com/issue/VIM-1103 but frankly, I am not so sure if it will be resolved.
Ok, guy from JetBrains answered my issue. The obvious workaround (which I didn't figure out) is to copy and paste from context menu. Then conversion question shows up. IMO it seems unlikely that IdeaVim plugin will support this feature by yanking and putting (Vim's copying and pasting), as from:
Running IDE actions on copy and paste might be a good idea, but we're not sure it wouldn't disrupt the workflow of the current users.
The vim plugin takes over the clipboard and past functions. When you type :actionlist you get a list of idea actions you can use in your .ideavimrc file to map keymaps to idea actions. Use :action COMMAND to execute the command.
I.e.:
norepmap <C-w>q :action VimWindowClose<cr>
closes the current window.
Furthermore, you can search for a particular action with :actionlist Past.
This lists
EditorPast <C-V> <S-ins>
among other things.
If you want to check if EditorPast ist the right command you can test it using :action EditorPaste.
Another way to make this work is to let idea handle the <C-v> shortcut. This can be archieved with the Settings -> Other Setting -> Vim Emulation settings. The handler (vim or idea) can be defined with that setting.

Modified changes not display in IntelliJ IDEA

I modified a file in IntelliJ IDEA that modification not saved on that day since I lost that changes I try to get back that code but its doesn't show any changes on that day and time how to solve this?
What you describe is a very unusual situation; one I've never heard of happening in my 12 years of using IDEA. IntelliJ IDEA automatically saves files at critical times, including closing the program. The only thing that would prevent it from saving a file is if there were permission issues with the directory containing the file. But even then, it should warn you that the file is read only and cannot be saved.
If the problem continues to occur, try uninstalling and reinstalling IntelliJ IDEA. Other than that, make absolutely sure you are editing the file you think you are editing. Perhaps there is a configuration problem.

How to disable autosave feature on IDEA?

env: IDEA-14.0.2, kubuntu14.10 x64
Yesterday I use IDEA to learn source from Spark. When discussing with my partner, I write serval lines directly to the source, then I closed the IDEA without ctrl+S
Today when I open the project I found that those little changes still exist and make the source very dirty (and bit hard to remove them since they are everywhere). I assume that there's a autosave feature the avoid close without saving by incident.
how to close that on certain project? or do it globally?
Currently it can't be disabled. There are a few open issues in the IntelliJ's YouTrack, for instance IDEABKL-6460. There is a long discussion in this issue, but from comments like this:
Auto-saving is built in very deeply and many IDE features just won't
work without it (e.g. compilation, running, etc). For reverting
unwanted changes there's VCS, Local History and Undo.
Currently we don't plan to add a possibility to disable auto-save.
it seems that implementing this feature isn't planned and even if it was it would be probably difficult. But you can leave a comment and vote for the issue because the more people request this feature the more probable it is that it will get actually implemented sometime in the future.

"File not found" at the execution of any VBA code in Access 2007

I'm working on a big Access 2003 project with Microsoft Access 2007­. Recently, some users have started to experience problems with the buttons in my forms. For example, without any specific reason, clicking on a button or trying to execute any code will return the error:
File not found
There is no way to go into debug mode. When this happens the only thing to do is to restart the database. I tried adding the Stop command at the beginning of the executed block to try debugging it, but no code is executed at all. It's like a compilation error but it's only happening 5-10% of the time, which is really weird.
After some research, I found other people are having the same problem, for example this and this link. There are other examples too, with no real solutions yet.
My database can be okay for a week and then the problem starts to happen again. Half the time and users can't do much; they need to restart the database once or twice to get it back working, and after a few minutes the error might happen again.
Because this is Access 2007 and there are a lot of people experiencing this bug, I can't believe it isn't more documented.
What's the problem? Is the database somehow partially corrupted? What should I do? This is really annoying.
If I was in this situation one of the first things I would try would be to do a complete decompile+compact+recompile operation on the front-end database file, and then distribute that updated front-end out to the users to see if that improves things.
Detailed instructions on the decompile+compact+recompile steps are available here. Note: Be sure to read David W. Fenton's additional recommendations in his answer.
I had just experienced this for the first time. I had been making extensive coding changes in a form, and was required to reboot my PC without finishing debugging the code. When I opened the app, I immediately got the "file not found" message (it auto-starts a different form).
On a whim, I went to the form in question and commented out that entire module's code and the problem went away. After I went back in and uncommented that code, everything still worked as normal. I was able to continue debugging that code and lived for the rest of the day happily.
though this thread is over a year old I would like to share another very helpful observation.
This error "File not found:" may be caused by differing save behavior of Office versions and may not have anything to do with your code! In case of this error, try to open and save your troubled file in another Office version and it may work fine back in your main Office version.
Details:
Though programming VBA for years now, I had never had an unsolicited "File not found:" error. Weird also that the error message does not give a file name for the file not found. (Reminded me of another nasty error VBA sometimes shows on startup for no obious reason and erratically.) Luckily this error started after my first edits in PowerPoint 2010 after having tested the file in PowerPoint 2016. The error occurred when opening the .pptm but I had no startup procedure involving a file. So I've got the idea of some file in the .pptm zip archive not being found. Started to do a quick search on the internet and found only "shooting in the dark" suggestions. As I could start PowerPoint 2013 more easily (virtual machine) than PowerPoint 2016 (different Windows 10 boot partition), I tried to open the troubled file in PowerPoint 2013 and had no problems. I compiled the VBA project to check for error. Nothing. And save the file. After this re-saving in PowerPoint 2013, the file seems to work fine again in PowerPoint 2010 und did not show any problems after the first few edits, saves and re-opening. This being said, I wonder if PowerPoint 2016 saving is peculiar and if I can replicate/if I will run into the error again if saving the file again in PowerPoint 2016 and returning to PowerPoint 2010. (I'll make a note of this thread to add new insights once I worked with this file again in PowerPoint 2016.)
Hope this observation may spare many unnecessary un-/re-installations of Office and other desperate attempts.
Cheers!
A similar thing has just happened to me a couple of times with one of my .mdb front ends running in Access 2013, after the August 2019 update to Windows 10.
My DBs too have been through several versions of Access. On opening the database it says 'File Not Found' and throws up a public module (not one on which I have been working extensively recently), without opening the Autoexec (Switchboard) form. 'Debug, Compile' is possible and doesn't suggest any problem.
For me too, typing one space (or blank line or other character) anywhere in the code, and then deleting it, and saving, closing and re-opening seemed to provide a workaround, and all has been well for the last few days (I am the only user at present).
There is no one obvious module involved, although I will probably suspect the form module I have been working on most recently if the problem persists in a troublesome way.
Now, a few days later I have de-compiled, compacted and re-compiled the database, halving its size, so maybe that will have done the trick. I hope so.
I just had this problem. In my case, I think the issue is having a blank VBA module. I was moving procedures from one module to another and ended-up with a blank module. I couldn't delete the module manually and every time I tried to create a procedure to delete blank modules, I received the "File not found" error and the procedure I had just created was blanked out. I ended-up reverting to a backup.
The issue is just your references. One of the files for your references has been moved/deleted/updated. Remove and re-add your references to figure out which one.
I had a problem similar to this. A blank "File Not Found" error.
I turned off AutoCorrect and after clicking through several prompts/warnings which had me concerned, I then reopened the database and the error went away.
When reopening the database the problem was resolved.
I suspect this will fix many "File not found" errors which are probably related to the temporary link table losing a reference for whatever reason.
I had this same issue MS Excel.
On the user pressing a button a useless File Not Found error appeared.
I ran through all suggested above and no change or help.
COMPLETELY ACCIDENTALLY I removed a module that i use for updating the Application status. This also has some array storage within. However, on removing this module (and commenting out references to it within my code) it appears that the issue is now fixed across users.
One Issue, is I have the same Module name within several different deployment's of Excel Add-ins. I suspect that on first run Excel isn't able to automatically assume the difference between them.
I had noticed a WORK AROUND for the error in which you create a break point on the first line of code for the button in question and then resume on break - I assume that this helped Excel evaluate and namespace the modules as to not cause conflicts.
I had that problem and solved it this way: I eliminated the form where the vba code was and imported the same form from a backup file made before.
I found yet another solution (at least in my case): In trying to find the error, I tested the application I created on a co-workers computer. This somehow reset whatever went haywire in the file. Afterwards I was able to open up the file on my computer again and everything worked as it should!
EDIT: I have realized that the error, im my case, seems to have been connected in some way to my using SendKeys (see my attempt to automate a report here on SO).
Had the same problem. I stumbled on the fix by accident. For whatever reason, simply adding an on-click Event Procedure made everything better.
Open the form in design mode
Select an object on the form
Press F4 to display the object's properties
Event > On Click > dropdown > click [Event Procedure]
Then click the three dots, which will create a new event, and launch the Visual Basic editor. This will also add default code into the Visual Basic editor
Make no other changes
Save and close changes to the form
Restart the database
For what its worth, as I was wrestling with this issue, the error resolved itself in other ways, but none of them were repeatable.
I had this problem as well, and compact/repair did not fix it. In my case I had an old VBA module that was no longer used, and which referenced an object class that no longer existed. Removing the non-compiling code fixed the issue for me.
I have had this problem for many years now in access 2010. Always in the Autoexec form that opens on msaccess startup. I tried creating a very simple form that calls the original more complex form. To my surprise the more problem moved the the new simple form. By trial and error, I found that just editing the new simple Autoexec form the problem would go away, but turn up randomly months later ALWAYS after I had made programming changes elsewhere. Sometimes instead of the file not found error, I get just get a crash out of access - but the solution is the same procedure - make a small edit to the autoexec file (just add new blank line will do). My project has come through many versions of access (2000 -> 2010). If there was some way to automate the editing of my autoexec form, then restarting access - this would serve as a workaround. I have not found any way as yet.
I have had this problem for years in my access database. I tried all the above solutions an they all fixed the problem, only to have the problem reappear sometime later - always after VBA code change. I discovered that decompiling and then recompiling ALWAYS FIXES this problem, and is the quickest and easiest way to do so. So I have concluded that there is a bug in way Office only partly compiles after program changes like macros and VBA code changes. After a number of changes the system gets 'unhinged' and throws up the 'file not found' error. Reading thru the fixes users have found in this blog supports my theory. Nearly all these fixes would probably cause some sort and recompile the unhinged code.
MY SOLUTION
In summary I have found the following..
Doing a Decompile (without a recompile) will get rid of the error - but if the code is run on a different machine the error appears again.
Doing a decompile, then a recompile followed by a Compact and Repair results makes my app run on other machines with out any problems.
I had a class module - Class1 - that was not used. I deleted it and did a compact and repair.
Something happened that caused the name of the class module to stay in the Navigation Pane but the module as such was removed:
When opening the VBA editor I got the "File not found".
Impossible to delete the name from the Navigation Pane!!
When decompiling the project I got "An error occurred while loading 'Class1'. Do you want to continue loading the project?"
I did - now the Class1 was still in Navigation Pane when opening project again but now I could delete from the Navigation Pane.
After that the message about file not found no longer appeared.
FYI