I have developed a query, and in the results for the first three columns I get NULL. How can I replace it with 0?
Select c.rundate,
sum(case when c.runstatus = 'Succeeded' then 1 end) as Succeeded,
sum(case when c.runstatus = 'Failed' then 1 end) as Failed,
sum(case when c.runstatus = 'Cancelled' then 1 end) as Cancelled,
count(*) as Totalrun from
( Select a.name,case when b.run_status=0 Then 'Failed' when b.run_status=1 Then 'Succeeded'
when b.run_status=2 Then 'Retry' Else 'Cancelled' End as Runstatus,
---cast(run_date as datetime)
cast(substring(convert(varchar(8),run_date),1,4)+'/'+substring(convert(varchar(8),run_date),5,2)+'/' +substring(convert(varchar(8),run_date),7,2) as Datetime) as RunDate
from msdb.dbo.sysjobs as a(nolock) inner join msdb.dbo.sysjobhistory as b(nolock)
on a.job_id=b.job_id
where a.name='AI'
and b.step_id=0) as c
group by
c.rundate
When you want to replace a possibly null column with something else, use IsNull.
SELECT ISNULL(myColumn, 0 ) FROM myTable
This will put a 0 in myColumn if it is null in the first place.
You can use both of these methods but there are differences:
SELECT ISNULL(col1, 0 ) FROM table1
SELECT COALESCE(col1, 0 ) FROM table1
Comparing COALESCE() and ISNULL():
The ISNULL function and the COALESCE expression have a similar
purpose but can behave differently.
Because ISNULL is a function, it is evaluated only once. As
described above, the input values for the COALESCE expression can be
evaluated multiple times.
Data type determination of the resulting expression is different.
ISNULL uses the data type of the first parameter, COALESCE follows
the CASE expression rules and returns the data type of value with
the highest precedence.
The NULLability of the result expression is different for ISNULL and
COALESCE. The ISNULL return value is always considered NOT NULLable
(assuming the return value is a non-nullable one) whereas COALESCE
with non-null parameters is considered to be NULL. So the
expressions ISNULL(NULL, 1) and COALESCE(NULL, 1) although
equivalent have different nullability values. This makes a
difference if you are using these expressions in computed columns,
creating key constraints or making the return value of a scalar UDF
deterministic so that it can be indexed as shown in the following
example.
-- This statement fails because the PRIMARY KEY cannot accept NULL values
-- and the nullability of the COALESCE expression for col2
-- evaluates to NULL.
CREATE TABLE #Demo
(
col1 integer NULL,
col2 AS COALESCE(col1, 0) PRIMARY KEY,
col3 AS ISNULL(col1, 0)
);
-- This statement succeeds because the nullability of the
-- ISNULL function evaluates AS NOT NULL.
CREATE TABLE #Demo
(
col1 integer NULL,
col2 AS COALESCE(col1, 0),
col3 AS ISNULL(col1, 0) PRIMARY KEY
);
Validations for ISNULL and COALESCE are also different. For example,
a NULL value for ISNULL is converted to int whereas for COALESCE,
you must provide a data type.
ISNULL takes only 2 parameters whereas COALESCE takes a variable
number of parameters.
if you need to know more here is the full document from msdn.
With coalesce:
coalesce(column_name,0)
Although, where summing when condition then 1, you could just as easily change sum to count - eg:
count(case when c.runstatus = 'Succeeded' then 1 end) as Succeeded,
(Count(null) returns 0, while sum(null) returns null.)
When you say the first three columns, do you mean your SUM columns? If so, add ELSE 0 to your CASE statements. The SUM of a NULL value is NULL.
sum(case when c.runstatus = 'Succeeded' then 1 else 0 end) as Succeeded,
sum(case when c.runstatus = 'Failed' then 1 else 0 end) as Failed,
sum(case when c.runstatus = 'Cancelled' then 1 else 0 end) as Cancelled,
SQL Fiddle Demo
A Simple way is
UPDATE tbl_name SET fild_name = value WHERE fild_name IS NULL
If you are using Presto, AWS Athena etc, there is no ISNULL() function. Instead, use:
SELECT COALESCE(myColumn, 0 ) FROM myTable
Wrap your column in this code.
ISNULL(Yourcolumn, 0)
Maybe check why you are getting nulls
Use COALESCE, which returns the first not-null value e.g.
SELECT COALESCE(sum(case when c.runstatus = 'Succeeded' then 1 end), 0) as Succeeded
Will set Succeeded as 0 if it is returned as NULL.
Add an else to your case statements so that they default to zero if the test condition is not found. At the moment if the test condition isn't found NULL is being passed to the SUM() function.
Select c.rundate,
sum(case when c.runstatus = 'Succeeded' then 1 else 0 end) as Succeeded,
sum(case when c.runstatus = 'Failed' then 1 else 0 end) as Failed,
sum(case when c.runstatus = 'Cancelled' then 1 else 0 end) as Cancelled,
count(*) as Totalrun from
( Select a.name,case when b.run_status=0 Then 'Failed' when b.run_status=1 Then 'Succeeded'
when b.run_status=2 Then 'Retry' Else 'Cancelled' End as Runstatus,
---cast(run_date as datetime)
cast(substring(convert(varchar(8),run_date),1,4)+'/'+substring(convert(varchar(8),run_date),5,2)+'/' +substring(convert(varchar(8),run_date),7,2) as Datetime) as RunDate
from msdb.dbo.sysjobs as a(nolock) inner join msdb.dbo.sysjobhistory as b(nolock)
on a.job_id=b.job_id
where a.name='AI'
and b.step_id=0) as c
group by
c.rundate
sum(case when c.runstatus = 'Succeeded' then 1 else 0 end) as Succeeded,
sum(case when c.runstatus = 'Failed' then 1 else 0 end) as Failed,
sum(case when c.runstatus = 'Cancelled' then 1 else 0 end) as Cancelled,
the issue here is that without the else statement, you are bound to receive a Null when the run status isn't the stated status in the column description. Adding anything to Null will result in Null, and that is the issue with this query.
Good Luck!
by following previous answers I was losing my column name in SQL server db however following this syntax helped me to retain the ColumnName as well
ISNULL(MyColumnName, 0) MyColumnName
For regular SQL, ISNULL(item) can only take one parameter, and thus 90% of these solutions don't work.
I repurposed #Krishna Chavali's answer to make this:
(CASE WHEN (NOT ISNULL(column_name)) THEN column_name ELSE 0 END) AS ColumnName
This will return the value in column_name if it is not null, and 0 if it is null.
UPDATE TableName SET ColumnName= ISNULL(ColumnName, 0 ) WHERE Id = 10
Related
I have a table which consists of data where in I'm having trouble counting the corresponding rows.
Here is the sample table:
I am expecting an output like this:
You can do conditional aggregation:
select
sum(case when result = 'X' then 1 else 0 end) count_x,
sum(case when result is null then 1 else 0 end) count_blank
from mytable
I assume that by blank you mean null. If not, then you can change the condition in the second sum() from result is null to result = ''.
If you are running MySQL, this can be shortened a little:
select
sum(result = 'X') count_x,
sum(result is null) count_blank
from mytable
I would like to check if any of my columns in a table have any null values. I am sure there is a quicker way than how I am doing it at the moment. I just want to see if there is a NULL in ANY column however my table has a lot of columns, is there a simple and quick way?
This way I have written so far works but it takes a long time to do for every column (hence the etc etc)
select
sum(case when id is null then 1 else 0 end) as id,
sum(case when name is null then 1 else 0 end) as name,
sum(case when review_count is null then 1 else 0 end) as review_coun,
sum(case when positive_review is null then 1 else 0 end) as
positive_review,
sum(etc etc
from user
I don't know if this will work for your scenario, but it's an option. You can CAST all your columns as a string and then concatenate them together. If you concatenate a NULL value with a string, it will return NULL.
SELECT 'Y'
WHERE EXISTS( -- Check if there are any NULL rows
SELECT
CAST(c1 AS CHAR(1)) ||
CAST(c2 AS CHAR(1)) ||
...
AS MyColumns
WHERE MyColumns IS NULL
)
;
Need to create a case statement for multiple criteria with varchar and date data types, my code sp far:
select
least(coalesce(case when 1.other_id=10 then 1.datestr else 0 end,
case when 2.info='Yes' then 2.date else 0 end))as date1,
from
test1 as 1
left join test2 as 2 on 1.id = 2.id
I essentially want to get the lowest date between 2 conditions. Both conditions have some filters (other_id=10 in first, info="Yes" in second). For those conditions I want to compare least dates.
I think this is the logic:
select (case when 1.other_id = 10 and 2.info = 'Yes'
then least(case when 1.other_id=10 then 1.datestr end,
case when 2.info='Yes' then 2.date end
)
when 1.other_id = 10 then 1.date
else 2.date
end)
Or, you can use more appropriate default values in your expression. Something like this (it might depend on the database):
select least(case when 1.other_id = 10 then 1.datestr else '9999-01-01' end,
case when 2.info = 'Yes' then 2.date else '9999-01-01' end)
) as date1,
I've a table in my database for which I need to check if all rows have one field not null.
If there are no row or if there is at least 1 row with the field null => true
If there are rows and they are all with the field not null => False
Is there a way to do this in on simple query? Or I need to check if my table is empty first then if it's not check if I've a row with the field value empty ?
This will count how many NULL values you have in a field;
SELECT
SUM(CASE WHEN FieldName IS NULL THEN 1 ELSE 0 END) NullValues
FROM TableName
Will return 0 if there are no NULL values, and will return the number of NULLS if there are any present.
If you actually want to return a value as 'True' or 'False' then do this;
SELECT CASE
WHEN a.NullValues > 0
THEN 'True'
ELSE 'False'
END CheckField
FROM (
SELECT
SUM(CASE WHEN FieldName IS NULL
THEN 1
ELSE 0
END) NullValues
FROM TableName
) a
Use count(*) and count(field) and compare the two:
select
case when count(*) > 0 and count(*) = count(field) then 1 -- not empty and no nulls
else 0 end as isgood
from mytable;
Oracle SQL has no boolean data type , so I use 1 for true and 0 for false. You can replace this with whatever you like (e.g. 'true' instead of 1 and 'false' instead of 0).
As to turning this into a predicate (correlated to a main query), you'd use something along the lines of:
select ...
from main
where exists
(
select 1
from mytable
where mytable.colx = main.coly
having count(*) > 0 and count(*) = count(field)
);
You can do this with aggregation. However, it is difficult to understand what you are asking for. If you want to check that a field has no NULL values, you can do:
select (case when count(*) > 0 then 1 else 0 end) as HasNullValues
from t
where field is null;
Alternate way I found using max with putting null first:
select case when
max(field) keep (dense_rank first order by datfin desc nulls first) is null then 1
else 0 end as flag
from MYTABLE;
I am wondering why the following query doesn't give 'N/A' when there are no rows for ENVIRON='Dev/Int'. It is returning null in the result of the query. I tried doing NVL(COUNT(*)) but that does't work either.
Any thoughts?
Thanks in advance.
SELECT G1.NAME,
(SELECT CASE
WHEN COUNT(*) > 0 AND ticket IS NOT NULL THEN 'Solved'
WHEN COUNT(*) > 0 AND ticket IS NULL THEN 'Done'
ELSE 'N/A'
END
FROM TABLE1
WHERE ENVIRON='Dev/Int' AND G1.NAME=NAME GROUP BY ENVIRON, ticket ) "Dev/Int"
FROM TABLE1 G1 group by G1.NAME
It doesn't give any rows because you are filtering them all out. The case is inside the query. When there are no rows to process, it returns NULL.
I think you just want conditional aggregation. The subqueries don't seem necessary:
SELECT G1.NAME,
(CASE WHEN SUM(CASE WHEN ENVIRON = 'Dev/Int' then 1 else 0 END) > 0 AND ticket IS NOT NULL
THEN 'Solved'
WHEN SUM(CASE WHEN ENVIRON = 'Dev/Int' then 1 else 0 END) > 0 AND ticket IS NULL
THEN 'Done'
ELSE 'N/A'
END) as "Dev/Int"
FROM TABLE1
group by G1.NAME;
EDIT:
Oops, the above left ticket out of the sum(). I think the logic you want has ticket in the sum() condition:
SELECT G1.NAME,
(CASE WHEN SUM(CASE WHEN ENVIRON = 'Dev/Int' AND ticket IS NOT NULL then 1 else 0 END) > 0
THEN 'Solved'
WHEN SUM(CASE WHEN ENVIRON = 'Dev/Int' AND ticket IS NULL then 1 else 0 END) > 0
THEN 'Done'
ELSE 'N/A'
END) as "Dev/Int"
FROM TABLE1
group by G1.NAME;
I'm surprised your original query worked at all and didn't get an error of the sort that subquery returned more than one row.