I have a two activeMQ(5.6.0) brokers. They use a shared kaha database so only one can be 'running' at once.
I have a (asp.net) webservice that puts a message on a queue, locally if I start and stop the brokers the webservice fails over correctly
when I test with the brokers on seperate machines it sometimes works but often I get "socketException: Connection reset" errors and the message is lost.
The connection string I am using is below. Note that I am aware NMS does not understand the priority backup command but I have left it there for the future.
failover:(tcp://MACHINE1:61616,tcp://MACHINE2:62616)?transport.initialReconnectDelay=1000&transport.timeout=10000&randomize=false&priorityBackup=true
How can I make my fail over between brokers fool proof?
The shared Kaha database was on a simple share. Currently activeMQ (or windows) cannot reliably get or release the lock in this configuration. The shared database must sit on a 'real' SAN so that both instances of the queue software see the database as being on a local filestore not a network location.
See this page for more info http://activemq.apache.org/shared-file-system-master-slave.html
Related
I have a JMS service targeted at a migratable target (using an Auto-Migrate Exactly-Once policy) in a cluster which consists of 2 managed servers, at any point of time the service is hosted at one of them and the consumer (which is targeted at the cluster) is supposed to receive messages seamlessly no matter where the service is hosted.
When I manually switch the host of the migratable target (clicking migrate), without turning the hosting managed server off, the consumer fails to receive messages sent to the queues, unless I turn off the previous hosting managed server forcing the consumer to the new host.
I can rule out sender problems, I can see the messages in the queue right after them being sent.
I'll be grateful if anyone can advice on how to configure either the consumer or the migratable service to work seamlessly when migration happens.
I think that may just be a misunderstanding of how migration works. The docs state Auto-Migrate Exactly-Once:
indicates that if at least one Managed Server in the candidate list
is running, then the JMS service will be active somewhere in the
cluster if servers should fail or are shut down (either gracefully or
forcibly). For example, a migratable target hosting a path service
should use this option so if its hosting server fails or is shut down,
the path service will automatically migrate to another server and so
will always be active in the cluster. Note that this value can lead to
target grouping. For example, if you have five exactly-once migratable
targets and only one server member is started, then all five
migratable targets will be activated on that server member.
The docs also state:
Manual Service Migration—the manual migration of pinned JTA and
JMS-related services (for example, JMS server, SAF agent, path
service, and custom store) after the host server instance fails
Your server/service has neither failed or shut down, you are forcing it to migrate with a healthy host still running, so it has not met the criteria for migration.
See more here as well.
I have some experience that sounds reminiscent of what you're looking at. There was some WLS-specific capability around recognizing reconfiguration in JMS destinations as part of their clustered server design.
In one case I had to call a WLS-specific method: weblogic.jms.extensions.WLSession.setExceptionListener(). This was on their implementation of the JMS Session interface. This is analogous to the standard JMS Connection.setExceptionListener().
With this WLS-specific capability, the WLSession.setExceptionListener() callback would occur at a point where the consuming client should tear down and re-establish the connection / session / consumer in reaction to a reconfiguration (migration) that had happened.
ActiveMQ broker setup:
Broker is running on machine: hostA
Clients from different host can connect to my broker instance running on hostA, there can be any number of client from any host.
Is there a way to find out how many clients are connected to broker and also list which tell me how many connection from each host is there to my broker.
I want to do this without making assumption about number of hosts.
I can do this by using lsof command and some parsing over output, but I am in situation where I can not use this.
Is there any feature provided by ActiveMQ command line utility activemq-admin.
You can get to pretty much any Mbean attribute ActiveMQ exposes via the activemq-admin. There are no attributes or operations that give you a quick count of connections from specific clients. You will have to do some work on your end to get all the details you want, but all the raw data is there.
Examples:
Broker Stats:
activemq-admin query --objname type=Broker,brokerName=localhost
Connection Stats
activemq-admin query --objname type=Broker,brokerName=localhost,connector=clientConnectors,connectorName=<transport connector name>,connectionViewType=clientId,connectionName=*
See full doc here.
NOTE: Documentation as of this writting has not be updated to take into account the Mbean changes made in AMQ. References to Object names in examples are not correct.
You can get the object name (or example sytax) from JMX (using jconsole or visual vm for example) from the MBeanInfo. Each object name wills stat something like org.apache.activemq:type. For the script, remove the "org.apache.activemq:" and you should be in business for any thing you need from JMX via the script.
I think you may also look into using Jolokia with your broker. Although not compatible with the activemq-admin script, you can reach everything you can from the activemq-admin script, but also have access to all of the operations. In the past I've heavily used the activemq-admin script for local monitoring/command line administration of the broker, but have started converting everything to hit the Jolokia service. But again, activemq-admin will give you a way to access what you are looking for here.
I have spent days reading MSDN, forums and article about this, and cannot find a solution to my problem.
As a PoC, I need to consume a queue from more than one machine since I need fault tolerance on the consumers side. Performance is not an issue since less than 100 messages a day should by exchanged.
I have coded two trivial console application , one as client, the other one as server. Using Framework 4.0 (tested also on 3.5). Messages are using transactions.
Everything runs fines on a single machine (Windows 7), even when running multiple consumers application instance.
Now I have a 2012 and a 2008 R2 virtual test servers running in the same domain (but don't want to use AD integration anyway). I am using IP address or "." in endpoint address attribute to prevent from DNS / AD resolution side effects.
Everything works fine IF the the queue is hosted by the consumer and the producer is submitting messages on the remote private queue. This is also true if I exchange the consumer / producer role of the 2012 and 2008 server.
But I have NEVER been able to make this run, using WCF, when the consumer is reading from remote queue and the producer is submitting messages localy. Submition never fails, my problem is on the consumer side.
My wish is to make this run using netMsmqBinding, but I also tried using msmqIntegrationBinding. For each test, I adapted code and configuration, then confirmed this was running ok when the consumer was consuming from the local queue.
The last test I have done is using WCF (msmqIntegrationBinding) only on the producer (local queue) and System.Messaging.MessageQueue on the consumer (remote queue) : It works fine ! => My goal is to make the same using WCF and netMsmqBinding on both sides.
In my point of view, I have proved this problem is a WCF issue, not an MSMQ one. This has nothing to do with security, authentication, firewall, transport, protocol, MSMQ version etc.
Errors info using MS Service Trace Viewer :
Using msmqIntegrationBinding when receiving the message (openning queue was ok) : An error occurred while receiving a message from the queue: The transaction specified cannot be imported. (-1072824242, 0xc00e004e). Ensure that MSMQ is installed and running. Make sure the queue is available to receive from.
Using netMsmqBinding, on opening the queue : An error occurred when converting the '172.22.1.9\private$\Test' queue path name to the format name: The queue path name specified is invalid. (-1072824300, 0xc00e0014). All operations on the queued channel failed. Ensure that the queue address is valid. MSMQ must be installed with Active Directory integration enabled and access to it is available.
If someone can help to find why my configuration cannot be handled by WCF, a much elegant and configurable way than Messaging, I would greatly appreciate !
Thank you.
You may need to post you consumer code and config to give more of an idea but it could be the construction of the queue name - e.g.
FormatName:DIRECT=TCP:192.168.0.2\SomeQueue
There are several different ways to connect to a queue and it changes when you are remote or local as well.
I have found this article in the past to help:
http://blogs.msdn.com/b/johnbreakwell/archive/2009/02/26/difference-between-path-name-and-format-name-when-accessing-msmq-queues.aspx
Also, MessageQueue Constructor on MSDN...
http://msdn.microsoft.com/en-us/library/ch1d814t.aspx
All,
I'm looking for advice over the following scenario:
I have a component running in one part of the corporate network that sends messages to an application logic component for processing. These components might reside on the same server, different servers in the same network (LAN ot WAN) or live outside in the cloud. The application server should be scalable and resilient.
The messages are related in that the sequence they arrive is important. They are time-stamped with the client timestamp.
My thinking is that I'll get the clients to use WCF basicHttpBinding (some are based on .NET CF which only has basic) to send messages to the Application Server (this is because we can guarantee port 80/443 will be open for outgoing connections). Server accepts these, and writes these into a queue. This queue can be scaled out if needed over multiple machines.
I'm hesitant to use MSMQ for the queue though as to properly scale out we are going to have to install seperate private queues on each application server and round-robin monitor the queues. I'm concerned though that we could lose a message on a server that's gone down until the server is restored, and we could end up processing a later message from a different server and disrupt the sequence.
What I'd prefer is a central queue (e.g. a database table) that all application servers monitor.
With this in mind, what I'd like to do is to create a custom WCF binding, similar to netMsmqBinding, but that uses the DB table instead but I'm confused as to whether I can simply create a custom transport or a I need a full binding, and whether the binding will allow the client to send over HTTP. I've looked around the internet but I'm a little confused as to where to start.
I could not bother with the custom WCF binding but it seems a good way to introduce scalability if I do need to seperate the servers.
Any suggestions please would be helpful, including alternatives.
Many thanks
I would start with MSMQ because it is exactly for this purpouse. Use single transactional queue on clustered machine and let application servers to take messages for processing from this queue. Each message processing has to be part of distributed transaction (MSDTC).
This scenario will ensure:
clustered queue host will ensure that if one cluster node fails the other will still be able to handle requests
sending each message as recoverable - it means that message will be persisted on hard drive (not only in memory) so in critical failure of the whole cluster you will still have all messages.
transactional queue will ensure that all message transport operations will be atomic - moving message from outgoing queue to destination queue will be processed as transaction. It means that original message from outgoing queue will be kept in queue until ack from destination queue arrives. Transactional processing can ensure in order delivery.
Distributed transaction will allow application servers consuming messages in transaction. Message will not be deleted from queue until application server commits transaction or transaction time outs.
MSMQ is also available on .NET CF so you can send messages directly to queue without intermediate non-reliable web service layer.
It should be possible to configure MSMQ over HTTP (but I have never used it so I'm not sure how it cooperates with previous mentioned features).
Your proposed solution will be pretty hard. You will end up in building BizTalk's MessageBox. But if you really want to do it, check Omar's post about building database queue table.
I have a WebLogic cluster on which I've deployed numerous topics and applications that use them. My applications uniformly show themselves in a Warning status. Looking at Monitoring on the deployment, I see the MDB application connects to Server #1, but on server #2 it shows this:
MDB application appName is NOT connected to messaging system.
My JMS Server is targetted to a migratable target, which is in turn targetted to the #1 server and has a cluster identified. And messages sent to either server all flow as expected. I just don't know why these deployments show in a Warning state.
WebLogic 11g
This can be avoided by using the parameter below
<start-mdbs-with-application>false</start-mdbs-with-application>
In the weblogic-application.xml, Setting start-mdbs-with-application to false forces MDBs to defer starting until after the server instance opens its listen port, near the end of the server boot up process.
If you want to perform startup tasks after JMS and JDBC services are available, but before applications and modules have been activated, you can select the Run Before Application Deployments option in the Administration Console (or set the StartupClassMBean’s LoadBeforeAppActivation attribute to “true”).
If you want to perform startup tasks before JMS and JDBC services are available, you can select the Run Before Application Activations option in the Administration Console (or set the StartupClassMBean’s LoadBeforeAppDeployments attribute to “true”).
Refer :http://docs.oracle.com/cd/E13222_01/wls/docs81/ejb/message_beans.html
this is applicable for the versions till 12c and later
I don't like unanswered questions, so I'm going to answer this one.
The problem is resolved, though I was not involved in its resolution. At present the problem only exists for the length of time it takes the JMS subsystem to fully initialize. During that period (with many queues, it can take a while) the JNDI system throws errors and the apps are truly in warning state. Once the JMS is fully initialized, everything goes green.
My belief is that someone corrected something in the JMS Server / Cluster config. I'll never know what it was.