I was expecting this to be a simple thing, but I am not quite sure how to go about doing it.
Basically on the current project we are trialling YouTrack and the agile board is great, but they could do with knowing who raised certain issues in case they need to go question them further on the issue. However I cannot seem to find a simple way to display this information.
I presumed it would be a custom field of type user, but it appears that this would manually need filling in and would not just be able to be pre-populated by the user who is making the task.
So is this possible?
Currently you can view only the assigned user's name on a ticket in Agile board.
I've created a task based on your request http://youtrack.jetbrains.com/issue/JT-19118, you are welcome to vote and leave comments.
As a rough workaround, you can configure notifications on created issues in your projects.
In this way, developers will be notified about all created issues and their reporters.
For that, create a saved search (i.e created by: {Testers}), make this search visible to needed group (by clicking "Edit" on the saved search) and enable notification "on issue created" in user's "Profile". Also, user with admin permissions is able to allow this notifications for all needed users by himself(navigate to "Administration" area -> "Users" -> {user} ->"Profile").
Note, that you can receive notifications both via email and jabber.
Thank you.
Related
I'm a tester and my manager has add new team project to the TFS and add my user and a developer user for this team project, when I've tried to add any type of work items the list of "Assigned To" shows all the users correctly, except for the "bug work item" only, I can't assigned to any user and shows that it is not in the list of supported values.
how can I solve this problem?
First, make sure the work item that you're manipulating currently in a state that has a valid transition to New. Otherwise, you will not be able to save the changes.
If you have customized the bug work item type. According to sounds like a rule in the bug workflow or field.
If you run the [witadmin exportwitd] command and export the bug work item type, look for the Assigned To Field and look at the rules on the field. Also take a look at the section and look at the rules for the transitions.
Also take a look at this similar question on TFS2015 Bug/Task unable to assign it to someone else than the user that creates it, try the suggestion mentioned in the link:
needed to give the relevant global top-level permissions for everyone
to view stuff
Just run the below in order to grant the needed rights :
tfssecurity /a+ Server FrameworkGlobalSecurity GenericRead
> "[DefaultCollection]\Project Collection Valid Users" ALLOW
> /collection:http://tfsserver:8080/tfs/DefaultCollection
In Liferay 7 Enterprise Edition,
I want to log user info like user_name in external log files automatically in each request to track user activities, how to do that?
without using auditing plugin
when I tried to log post request for example (login), it doesn't contain any info about user ?!
This kind of thing is much harder than you might think...
Getting access to the current user is really easy. As Victor pointed out, you can use the ThemeDisplay object to get current user. If you don't have the request around, you can use the PrincipalThreadLocal to find the current user id.
That gives you the who, but certainly not the "what is user doing" aspects. Since the portal aggregates the HTML fragments of many portlets, from a servlet filter perspective it would be hard to gleam which one of the available portlets on an incoming URL is actually being interacted with. You could try a portlet filter to narrow the field, but this will just tell you what portlet is being accessed but not what they are doing with it.
Although you rejected the built in audit functionality available in DXP, it really is the answer for tracking who did what in the portal because it has the necessary touch points to get those two pieces and put them together.
Now if you rejected the built in audit functionality because you want a file and not a database entry, that is easy to solve. Go to the System Settings control panel and find the Logging Audit Message Processor and enable it. It will write the audit events out to a file in CSV format, but you should have the source for modules/apps/foundation/portal-security-audit/portal-security-audit-router/src/main/java/com/liferay/portal/security/audit/router/internal/LoggingAuditMessageProcessor.java so you can use this as a basis to write your own format.
Look at this code:
https://github.com/amusarra/liferay-portal-security-audit
in particular the portal-security-audit-capture-events module that catch the login events.
This seems a job for a filter, the user information is normally extracted from the themeDysplay, like in:
ThemeDisplay themeDisplay = ( ThemeDisplay ) request.getAttribute( THEME_DISPLAY );
long userId = themeDisplay.getRealUserId();
If you want to track specific portlets, an OSGi portlet filter would do the job.
First of all, I have to say that I am NET developer (C#) and my knowledge on Dynamics 365 is pretty limited. Nevertheless my employer thought that I am good enough to make that thingy from post title :)
After couple of hours researching and reading, I found this video https://www.youtube.com/watch?v=6LwZLoXS6jo which address on how to create and send SMS from Dynamics. I am aware that this require me to create new Dynamics entities, at least SMSMessage and SMSMessageTemplate, but at least I found out how to do this :)
I understood everything stated there, but as i already said, due to my lack of knowledge on Dynamics 365, I got problems with (probably) basic things regarding Dynamics.
Here are those problems:
1. As far as I can tell, in order to build SMS gateway, first thing I need to do is to add new menu item inside Dynamics 365. I presume that this new menu item should reside inside 'Contacts' menu (contacts.jpg, marked with red box) but I am not sure on how to achieve this. Please note, I do not want someone to provide me with some magic solution, I just need someone to provide me with valid links that I can use to learn about this and solve my own problem :)
2. When new menu item is in place, and user click on it, I would like to open up a form for user to select SMS template that will be used and maybe setup some other values. Same again, U do not need to help me with exact code, just with some usable links :)
3. Inside that form that user will open on menu click, I would like to know how to get list of selected contacts (from grid at contact.jpg)
When I (finally) have that list of contacts, I will create SMS entities mentioned above (video link) and everything will fall in place and (hopefully) work.
I am aware that this is probably too much to ask, cause Dynamics 365 is rather complex, and people are spending great amounts of money and their time learning to became Dynamics developers, but without help, Dynamics is making me running in circles chasing my own tail :) and getting nowhere.
Also, I will be using online Dynamics 365 so bare in mind that any solution should work with it.
if any of U think that I missed or got something wrong, please let me know.enter image description here
So basically to get you started, you should:
1) Create a solution in Settings => Customizations => Solutions
2) Add contact entity to that solution (by choosing "Add existing" under Entities pane). Don't click "Add all assets" you will need only contact metadata to get going
3) Create jScript file and add a web resource to CRM (nothing really complicated, just go to web resources in you solution and click "Add new" and specify type of your web resource as jScript and target your file).
4) Now download http://www.xrmtoolbox.com
5) For now you are interested only in plugin "Ribbon Workbench"
6) Now simply choose your solution and contact - you will see command bars for contact homepage, list and form. This is pretty strainghtforward - simply drag and drop a button wherever you like, create a command using workbench and bind the button with the command (simply choose it from a drop-down). The command you are interested in is Custom Javacript. Here you specify your web resource and name of the function that you want to call. You can also specify parameters that should be passed inside your function for example ids of selected items (if you are on the list of records).
There are many approaches to fulfil your specific needs, but being able to call a custom javascript function from a button should be a good starting point, the rest is simply the knowledge of CRM SDK, so how to create an entity using API or open a form or open a web resource - everything is very well documented and you can get it simply by asking google, so I will not post any blog here, not to advertise too much. Also I's suggest downloading latest CRM SDK (https://www.microsoft.com/en-us/download/details.aspx?id=50032) - you have many sample code there, regarding plugins and some form modifications, you should also check this out.
To make it easier for you, you should refer to this "menu" as "Command bar" or "Ribbon", so rather look for "adding custom button to command bar CRM 2016" and you will be all good. Also to make a form for choosing a template, you will probably need some custom web resource, so "creating custom html5 web resource CRM 2016" should give you some good examples.
I have recently added Explanation text to certain fields on the SRM Contract screen (both standard and cusom fields). The user that I unit tested with worked fine, however most other users do not work. After investigation I've found that it is not just the Explanation Text that I've added, but all Explanation Text that is missing.
According to the sap help entry the behaviour is similar to what I would expect for Help mode = off.
Is it possible to turn Help mode on or off on a per user (or role) basis, and where should I look to find this?
you already found it: SAP Help says:
"You can activate the help mode either in the personal settings in the portal or in the associated URL Parameter" ... means in personal Settings, but I feel that you want it globally not on personal base or in the associated URL Parameter. The latter means you'll have to find the application in the Portal Content, there you can find URL Parameter and i would try adding HELPMODE=ON... does this help you?
start by rightclicking you application "Technical Help" or "..Help" and see what application you are looking for. Then Google the application and add +"Portal Content", I think then you'll find it.
regards, zy
I'm working on a Rails application. Two of my models are notes and attachments. The user can create notes and add attachments to them. This is standard stuff and I already have this working fine.
Currently, the user must create a note before they can add attachments to it. I'm looking to implement a more streamlined workflow for the user, similar to the familiar email workflow where you can add attachments to an unsaved email. However, the key is that I don't want the user to even have to save a draft of the note before the attachment can be added, and I want this unsaved note to be abandoned if the user navigates away (I don't want to have the additional complexity of unsaved/unpublished notes).
I know that when the note hasn't initially been saved yet, I can create the attachments without the link to the note, and then establish the link when the note gets saved. The part I'm drawing a blank on is how do I remove the unused attachments if the user breaks off the note creation process? Is there a hook that I'm missing that allows me to see that the user broke off?
Without such a hook, the first solution that comes to mind is a nightly cleanup script that runs via cron that would find all of the unattached attachments and remove them (perhaps filtering by attachments that have been created more than 24 hours ago). Is this the best solution?
There really isn't any kind of trigger to let you know when to clean those up, since a user can just leave the site without "logging out" or some other action. So that leaves you with a background job not attached to user action. In your case I think a nightly cron is nice and simple and would fit this situation well.