As I was trying to harvest the user_timelines for a list of user_ids, I noticed that my own home_timeline was also being harvested. In the end I discovered that whenever my list used a null string entry for user_id, executing the code below was the same as executing
twitter_api.statuses.home_timeline. That is ok, but I do not see such behavior Twitter- documented? What am I missing in the documentation?
auth = twitter.oauth.OAuth(OAUTH_TOKEN, OAUTH_TOKEN_SECRET,CONSUMER_KEY, CONSUMER_SECRET)
twitter_api = twitter.Twitter(auth=auth)
twitter_api.statuses.user_timeline(user_id='')
You're correct - if you invoke the Twitter API v1.1 user_timeline method without a user_id or screen_name parameter specified (or null), it will return the user_timeline for the authenticated user making the API call. This is undocumented behaviour.
Note that home_timeline is a different method, and will return Tweets from the users you follow, not your own Tweets. I think you're describing the former (user_timeline), not home_timeline.
I'll make a note to get this added to the official API documentation.
I'm trying to figure out how to download a PDF from the BOE restful API.
I've been following the answer from ƘɌỈSƬƠƑ here:
SAP BI Open Doc URL for retrieving pdf
I was able to accomplish step 1 (getting the token).
But on the second step, it mentions using the documentID.
e.g.
/biprws/raylight/v1/documents/5690743/parameters
On the front end of BOE, if I click on the report, and choose Properties, it shows me that the "ID/CUID" is:
ID, CUID:746001, AdgNq_GsaqhOqnzc4gRN_Jg
Does that mean the "DocumentID" is 746001?
I'm not sure if I'm using the correct ID, because when I hit:
/biprws/raylight/v1/documents/746001/parameters
I get:
<error>
<error_code>100</error_code>
<message>Rule not respected (Argument 'reportIds' must not be null)</message>
</error>
You don't need to obtain prompt information (/parameters endpoint).
I think you are using the correct ID since the error is on the report. You obtain a 404 Not Found response status, if the document does not exist.
After a successful login, simply call /biprws/raylight/v1/documents/5690743 and add to your request an header with name Accept and value application/pdf. Of course the X-SAP-LogonToken should also be provided.
It will export the whole document. If you only need a specific report, you need to retrieve its ID first. Call the URI /biprws/raylight/v1/documents/5690743/reports with Accept header equals to application/json.
Choose one of the report, and get its ID (for example, in my case reportID equals 1234). Then you can export the report as a PDF by calling the URI: /biprws/raylight/v1/documents/5690743/reports/1234 with Accept header equals to application/pdf.
I am still new to javascript and trying to write a Slackbot in express js. I want to use the method defined in https://api.slack.com/methods/channels.history. How should this look syntacticly and how do I use it since the method is simply a URL?
You need to make an http request for the URL and you'll be returned a response with an object containing the status (ok:true|false), if there are more messages (has_more:true|false), and then an array of the actual messages (messages:array).
The response should look something like this:
{
has_more:true
messages:Array[100]
ok:true
}
The url that you make the get request to should look something like:
https://slack.com/api/channels.history?token=BOT_TOKEN&channel=CHANNEL_ID&pretty=1
Where BOT_TOKEN is the token attached to the bot you created, and CHANNEL_ID is the ID (not the name) of the channel whos history you want to get (9 uppercase alphanumeric characters, starts with a "C").
There are also a few other parameters you can include in the url. For example, "latest=", "oldest=", "inclusive=", "count=", and "unreads=". Details about those parameters can be found on the page you linked to (https://api.slack.com/methods/channels.history).
If you want to test it out in your browser's console, find a page where jQuery is loaded, open your dev tools and head into the console, and enter the following (with your bot token and channel id swapped in):
$.get('https://slack.com/api/channels.history?token=BOT_TOKEN&channel=CHANNEL_ID&pretty=1', function(response){console.log(response)});
I am using the rest api. After retrieving the login form for a site, I input incorrect login information. I need to now go back and correct the mistake. At first I tried calling GetSiteLoginForm, which isn't allowed since the user is already associated to the site. I then tried to SiteTraversal/getSiteInfo with valid cobSessionToken and &siteFilter.reqSpecfier=16&siteFilter.siteId=643.
The response I get is:
{"popularity":0,"siteId":643,"orgId":520,"defaultDisplayName":"Chase (US)","defaultOrgDisplayName":"Chase Manhattan Bank","contentServiceInfos":[{"contentServiceId":663,"siteId":643,"containerInfo":{"containerName":"bank","assetType":1}},{"contentServiceId":10441,"siteId":643,"containerInfo":{"containerName":"bill_payment","assetType":0}},{"contentServiceId":3163,"siteId":643,"containerInfo":{"containerName":"credits","assetType":2}},{"contentServiceId":3483,"siteId":643,"containerInfo":{"containerName":"stocks","assetType":1}},{"contentServiceId":7100,"siteId":643,"containerInfo":{"containerName":"loans","assetType":2}},{"contentServiceId":3861,"siteId":643,"containerInfo":{"containerName":"mortgage","assetType":2}},{"contentServiceId":12049,"siteId":643,"containerInfo":{"containerName":"miles","assetType":0}}],"enabledContainers":[{"containerName":"bank","assetType":1},{"containerName":"bill_payment","assetType":0},{"containerName":"credits","assetType":2},{"containerName":"stocks","assetType":1},{"containerName":"loans","assetType":2},{"containerName":"mortgage","assetType":2},{"containerName":"miles","assetType":0}],"baseUrl":"http://www.chase.com/","loginForms":[],"isHeld":false,"isCustom":false,"siteSearchVisibility":true}
Note loginForms is empty. How do I get this value? I tried different values of siteFilter.reqSpecfier and always get the same result. Other things I tried were using both the our public and private urls. I duplicated all of this with Dag Site as well.
There is typo in one of the input parameters because of which the parameter is not being recognized by our API’s and hence returning Null LoginForms.
[ siteFilter.reqSpecifier is incorrectly spelled as siteFilter.reqSpecfier ]
Your Excerpt from below email:
cobSessionToken=11182013_0%3A8e8a9caa264e3b26f15c3c9a3ee05680b2edb76272d0a425852a803e6002383b89847d388de38394b4f08efbb881536b496e323ee4e42c9df7dfdcdc8ae10e16&siteFilter.**reqSpecfier**=16&siteFilter.siteId=643
This should be :
cobSessionToken=11182013_0%3A8e8a9caa264e3b26f15c3c9a3ee05680b2edb76272d0a425852a803e6002383b89847d388de38394b4f08efbb881536b496e323ee4e42c9df7dfdcdc8ae10e16&siteFilter.**reqSpecifier**=16&siteFilter.siteId=643
With corrected parameter I was able to query Site 643 and get the loginForm Array. Below is the response with loginForms[]
{"popularity":0
"siteId":643
"orgId":520
"defaultDisplayName":"Chase"
"defaultOrgDisplayName":"Chase Manhattan Bank"
"contentServiceInfos":[{"contentServiceId":663}
{"contentServiceId":10441}
{"contentServiceId":3163}
{"contentServiceId":3483}
{"contentServiceId":7100}
{"contentServiceId":3861}
{"contentServiceId":12049}]
"enabledContainers":[{
"containerName":"bank","assetType":1}
{"containerName":"bill_payment","assetType":0}
{"containerName":"credits","assetType":2}
{"containerName":"stocks","assetType":1}
{"containerName":"loans","assetType":2}
{"containerName":"mortgage","assetType":2}
{"containerName":"miles","assetType":0}]
"baseUrl":"http://www.chase.com/"
"loginForms":[{"conjunctionOp":{"conjuctionOp":1}
"componentList":[
{"valueIdentifier":"LOGIN","valueMask":"LOGIN_FIELD","fieldType":{"typeName":"TEXT"},"size":20,"maxlength":32
"name":"LOGIN","displayName":"User ID","isEditable":true,"isOptional":false,"isEscaped":false,"helpText":"4710","isOptionalMFA":false
"isMFA":false},
{"valueIdentifier":"PASSWORD","valueMask":"LOGIN_FIELD","fieldType":{"typeName":"IF_PASSWORD"},"size":20,"maxlength":40
"name":"PASSWORD","displayName":"Password","isEditable":true,"isOptional":false,"isEscaped":false,"helpText":"11976","isOptionalMFA":false
"isMFA":false}
]
"defaultHelpText":"324"}]
"isHeld":false
"isCustom":false
"siteSearchVisibility":true}
This should resolve your problem
Regards,
Vishal
Yodlee Team
The flow for updating the credentials is listed in this article UpdateCredentials Flow
You can follow the exact steps from the article.
Even when the user is associated to a particular site , you can still pull the login form using getSiteLoginForm and show the form to the user to enter the correct credentials and then pass the login form in updateSiteAccountCredentials and then proceed with the normal refresh flow.
I am working with the Yodlee services in c# and using the RESTful api. So far I have successfully connected and logged in with my CobrandSession and UserSessionToken in the development environment. I used the sample apps provided in c# and with some advice from shreyans i got an app working. What I got working was
1) Get YodleeAuthentication
2) Get UserAuthentication
3) Get ItemSummaries
I am now trying to get the full transaction details for each of the Items (i.e. collections of accounts that are an Item)
reading the Docs here https://developer.yodlee.com/Indy_FinApp/Aggregation_Services_Guide/REST_API_Reference/executeUserSearchRequest it states that I need to call executeUserSearchRequest and then paginate through the results using the getUserTransactions. So I am stuck at this point. I dont really want a search which has parameters I just want ALL transactions for this account that I can see.
However, I am using the variables as defined in that page :-
var request = new RestRequest("/jsonsdk/TransactionSearchService/executeUserSearchRequest", Method.POST);
request.AddParameter("cobSessionToken", param.CobSessionToken);
request.AddParameter("userSessionToken", param.UserSessionToken);
request.AddParameter("transactionSearchRequest.containerType", param.ContainerType);
request.AddParameter("transactionSearchRequest.higherFetchLimit", param.HigherFetchLimit);
request.AddParameter("transactionSearchRequest.lowerFetchLimit", param.LowerFetchLimit);
request.AddParameter("transactionSearchRequest.resultRange.endNumber", param.EndNumber);
request.AddParameter("transactionSearchRequest.resultRange.startNumber", param.StartNumber);
request.AddParameter("transactionSearchRequest.searchFilter.currencyCode", param.CurrencyCode);
request.AddParameter("transactionSearchRequest.searchFilter.postDateRange.fromDate", param.FromDate);
request.AddParameter("transactionSearchRequest.searchFilter.postDateRange.toDate", param.ToDate);
request.AddParameter("transactionSearchRequest.searchFilter.transactionSplitType.splitType", param.SplitType);
request.AddParameter("transactionSearchRequest.ignoreUserInput", param.IgnoreUserInput);
request.AddParameter("transactionSearchRequest.searchFilter.itemAcctId", param.ItemAcctId);
var response = RestClientUtil.GetBase().Execute(request);
var content = response.Content;
return new YodleeServiceResultDto(content);
As per the response from shreyans in this posting Getting Error "Any one of [**] of transactionSearchFilter cannot be NULL OR Invalid Values I am not putting in the ClientId and the ClientName
The documentation doesn't specify the format of the dates but the example seems to tell me that its american date format. And specifies a parameter saying IgnoreUserinput, but doesnt have a parameter for user input so this is confusing
When I make a call using this format I get an error response
var getSearchResult = yodleeExecuteUserSearchRequest.Go(yodleeExecuteUserSearchRequestDto);
getSearchResult.Result="
{"errorOccured":"true","exceptionType":"Exception Occured","refrenceCode":"_60ecb1d7-a4c4-4914-b3cd-49182518ca5d"}"
But I get no error message in this and I have no idea what I have done wrong or where to look up this error, can somebody who has used Yodlee REST Api point me in the right direction as I need to get this researched quickly....
thanks your your help, advice, corrections and pointers....
Here is the list of parameters which you can try
1) For a specific ItemAccountId all transactions
transactionSearchRequest.containerType=all
transactionSearchRequest.higherFetchLimit=500
transactionSearchRequest.lowerFetchLimit=1
transactionSearchRequest.resultRange.startNumber=1
transactionSearchRequest.resultRange.endNumber=500
transactionSearchRequest.searchClients.clientId=1
transactionSearchRequest.searchClients.clientName=DataSearchService
transactionSearchRequest.searchFilter.currencyCode=USD
transactionSearchRequest.searchClients=DEFAULT_SERVICE_CLIENT
transactionSearchRequest.ignoreUserInput=true
transactionSearchRequest.ignoreManualTransactions=false
transactionSearchRequest.searchFilter.transactionSplitType=ALL_TRANSACTION
transactionSearchRequest.searchFilter.itemAccountId.identifier=10000353
2) For a Specific account (itemAccountId) with start and end dates
transactionSearchRequest.containerType=all
transactionSearchRequest.higherFetchLimit=500
transactionSearchRequest.lowerFetchLimit=1
transactionSearchRequest.resultRange.startNumber=1
transactionSearchRequest.resultRange.endNumber=500
transactionSearchRequest.searchClients.clientId=1
transactionSearchRequest.searchClients.clientName=DataSearchService
transactionSearchRequest.searchFilter.currencyCode=USD
transactionSearchRequest.searchClients=DEFAULT_SERVICE_CLIENT
transactionSearchRequest.ignoreUserInput=true
transactionSearchRequest.ignoreManualTransactions=false
transactionSearchRequest.searchFilter.transactionSplitType=ALL_TRANSACTION
transactionSearchRequest.searchFilter.itemAccountId.identifier=10000353
transactionSearchRequest.searchFilter.postDateRange.fromDate=08-01-2013
transactionSearchRequest.searchFilter.postDateRange.toDate=10-31-2013