I just installed of SQL Server Management Studio Express 2012, and then I try to connect database engine with servername : ./sqlexpress, but it failed.
Its raised message like below :
TITLE: Connect to Database Engine
Cannot connect to ./sqlexpress.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476
The system cannot find the path specified.
Whats going wrong?
I've seen this in the past, most likely the wrong instance name or address. Since it is a local DB instance on your machine you will want to try connecting to (local)\SQLEXPRESS [This is the default SQL Express Instance]
If you are running a local instance of SQL Server you can just use localhost as the server name. Also you can try to remove the ./ before the server name.
If anyone else gets a failed to connect to server instance while trying to connect to a DB in C#, make sure you add localhost to the front of your database server address if you're on the same machine.
ie: myDatabase2012
should be put in as localhost\\myDatabase2012 (the second \ is needed to escape the first)
Related
After setup I can't open my SQL Server Management Studio:
TITLE: Connect to Server
Cannot connect to 0.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
The network path was not found
In my case what it worked for me was the Hosts file in the folder C:\Windows\System32\drivers\etc
I was trying to connect into a SQL server with a name that has an entry in the HOSTS file; however, the IP in the HOSTS file was unreachable - Nonexisting -
First, I connected using my SQL client using the IP address and it was no problem.
Next, I delete the entry for the SQL server name in the HOST file in the folder C:\Windows\System32\drivers\etc, saved it and again tried to connect into that SQL server using the name that I just deleted from the host file and it went thru without issues.
I hope it helps someone along the way
It happened for me, but it is nor serious problem. If database is in your local, may be u must boot IIS or SQLEXPRESS manually in Services of Windows.
And may be, you are writing incorrect name.
You can try the following:
In Windows, go to Services >> SQL Server related to your instance >> Right Click >> Start
Again in Services >> SQL Server AGENT related to your instance >> Right Click >> Start
Try connecting the instance again using SSMS.
Regards,
Pratik
The error message is saying Cannot connect to 0. That 0 is where it would normally give the name of the instance it was trying to connect to. Which implies that you gave it 0 as the name of the SQL instance to connect to, which is never going to work.
You need to give it the name of the machine where the SQL server service has been installed (or use shortcuts like . or localhost to represent the current machine) and if the instance name was not the default instance name, you need to follow the machine name with backslash and the instance name.
If you want to connect to the local instance via SQL Server Management. You can expand the server name box and click the . Then you can browse the local servers via expand the "Database Engine". Please click the instance name which you want to connect so that you can avoid fat figures.
Browse for Servers
Besides, if you want to connect to the default instance on the local computer, please specify the server name as "localhost" or " . ". For detailed information, please refer to the document.
https://learn.microsoft.com/en-us/sql/database-engine/configure-windows/logging-in-to-sql-server?view=sql-server-2017
Unable to Connect to Server in Microsoft SSMS
Getting the below error! Please refer to the attachment for more details.
Error Details: TITLE: Connect to Server
Cannot connect to root.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
The network path was not found
First of all, your server name regularly is localhost instead of root. Second, from SSMS 16 up, you need additional installation of localhost server. You can read the reference here.
After numerous attempts I tried many versions, I was able to fix this issue by installing the SQL Server 17. I was successfully able to create a server and connect to SQL Server.
My instance name is MSSQLSERVER and while I connect to Management Studio, I use .\MSSQLSERVER to login. I have gone through all the threads here but everyone is suggesting to enable tcp, pipes, shared memory which I have done and restarted the server too. Also I am using .\instance name as suggested. But still can't connect, and I get the following error
TITLE: Connect to Server
Cannot connect to .\MSSQLSERVER.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) (Microsoft SQL Server, Error: 87)
It would be great if someone could help me with this
MSSQLSERVER is the SQL Server service name for the default instance which is the instance without any instance name - so to connect to this (unnamed) default instance, just use
.
(local)
localhost
your-machine-name
without any "instance" name (since there is NO instance name)
I'm trying to connect to a sql server and its not allowing me to. This just recently started happening from what I can tell nothing was changed. The TCP port (1433) is enabled and allowed access through the firewall, the Named Pipes is enabled. I can ping the IP address of the SQL Server I am trying to connect to. I am running out of ideas fast!
Here is the error:
Cannot connect to (MyServerName)
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
The network path was not found
This was resolved. The company that was hosting the SQL Server I was trying to reach had blocked our cloud server IP address. Thanks for your help everyone!
Map your shared folder on both Sql Servers [ primary and secondary Sql server ] and try again to configure file log shipping may this help because in my scenario is working for me
I just installed SQL Server 2005 SP2 on Vista and am attempting to connect to my object explorer in Management Studio. When doing so I get the following error:
Cannot connect to localhost.
A network-related or instance-specific
error occurred while establishing a
connection to SQL Server. The server
was not found or was not accessible.
Verify that the instance name is
correct and that SQL Server is
configured to allow remote
connections. (provider: Named Pipes
Provider, error: 40 - Could not open a
connection to SQL Server) (Microsoft
SQL Server, Error: 2)
I am using the following credentials:
Server type: Database Engine; Server name: localhost; Authentication: Windows Authentication
I am just using SQL Server for a local application. I have tried using 127.0.0.1, my comp name, "." and localhost. I have searched and tried every relevant help topic I could find. I have reinstalled, turned on IIS (just a guess), updated to latest service packs all around, run as admin, etc.
What am I missing here?
JJ
Did you run the User Provisioning Tool for Vista? See KB929907 You may be unable to perform most database operations after you log on to an instance of SQL Server 2005 Express Edition Service Pack 1 on a Windows Vista-based computer
Try using (local)
Also if you have an instance name you can try myComputerName\instanceName
You're missing the instance name. You don't just connect to localhost, but to any of the following (assuming that your machine is called dago and your instance sqlexpress):
localhost\sqlexpress
dago\sqlexpress
.\sqlexpress
I am not using express. It turns out I had a "client" version of SQL Server installed. I didn't even know there was a client version. I ran the full install and added the sa user as Windows Authentication wasn't working for me (next goal). I am connecting via "localhost" (just localhost), so I don't fully understand what the instance suggestion was all about.
Basically the solution was to get the full version installed. My bad. Easy fix.
JJ